SPI LedgerNews analysis
Verpact tariefdifferentiatie 2027: design steps stay at EUR 0.10 a kilo while recycled content splits off
Under the Verpact tariefdifferentiatie 2027, the Dutch plastic discount splits in two from 1 January 2027: a Design for Recycling scheme of four EUR 0.10 steps per kg, capped at EUR 0.40, and a separate Circulaire Plastics scheme for recycled and biobased content; the list rates keep rigid plastic at EUR 1.22 and flexible plastic at EUR 1.32 per kg.
EUR 1.22 and 1.32 per kg
Rigid and flexible plastic, 2027
Same as 2026
Verpact Tarieven
EUR 0.40 per kg
Design for Recycling ceiling, 2027
32.8% of the rigid rate, by SPI's calculation
Verpact DfR regulation
EUR 0.15 per kg
Recyclate reward lost on some packs
Non-contact packs at 20% to 35% recycled content: EUR 0.20 in 2026, EUR 0.05 in 2027
SPI calculation
Source: Verpact Tarieven and Tariefdifferentiatie Plastic regulations 2026 and 2027; SPI calculation (SPI summary), checked 22 Nov 2026.
EUR per kg excluding VAT. The 32.8% figure is an SPI calculation: EUR 0.40 divided by the EUR 1.22 rigid rate. The EUR 0.15 cut applies to non-contact-sensitive packaging with 20% to 35% recycled content, on SPI's reading of the 2027 Circulaire Plastics text. Static figures; they do not update.
The discount applies to every producer and importer that pays Verpact’s rigid or flexible plastic tariff on the Dutch market, and it is claimed in the annual declaration that falls due before 1 April 2028. This SPI Ledger piece reads the 2027 Design for Recycling regulation line by line against its 2026 predecessor, prices what each step is worth per kilo and per pack, and shows which 2026 claimants lose money in 2027 even though the list rates do not move.
| Material line | 2026 | 2027 | Change (%) |
|---|---|---|---|
| Glass | 0.100 | 0.100 | 0.0 |
| Paper and board | 0.017 | 0.017 | 0.0 |
| Plastic, rigid (vormvast) | 1.220 | 1.220 | 0.0 |
| Plastic, flexible or unspecified | 1.320 | 1.320 | 0.0 |
| Plastic drink bottles without deposit | no data | 2.600 | no data |
| Aluminium | 0.340 | 0.380 | 11.8 |
| Other metals | 0.360 | 0.360 | 0.0 |
| Wood | 0.015 | 0.015 | 0.0 |
| Drinks cartons | 0.920 | 1.110 | 20.7 |
Source: Verpact: Tarieven, as reported by CostManagement and Kunststof Magazine, 7 October 2026; SPI calculation of change (SPI summary), checked 22 Nov 2026.
EUR only. n/a means no such line that year. The single-use plastic component stays at EUR 2.10 per 1,000 items in 2027 and is charged per item, not per kg. Discounts in this article apply to the rigid and flexible plastic lines only.
Executive summary
Verpact, the Dutch producer organisation that collects the afvalbeheerbijdrage verpakkingen, published its 2027 tariffs on 28 September 2026. For plastic the list did not move: rigid plastic stays at EUR 1.22 per kg and flexible or unspecified plastic at EUR 1.32 per kg for a third year. Aluminium rises 11.8% to EUR 0.38, drinks cartons 20.7% to EUR 1.11, and a new line charges EUR 2.60 per kg on plastic drink bottles that still carry no deposit (Exhibit 1). SPI’s Verpact fees and plastic tax piece covers the bottle line, the deposit contributions and the 50,000 kg allowance; this piece is about the plastic discount, which changes more than the table does.
From 1 January 2027 the Regeling Tariefdifferentiatie Plastic splits into two regulations. Design for Recycling keeps the four design steps of 2026, mono-material, colour, labels and print, and a good Recyclecheck result, each worth EUR 0.10 per kg of plastic, with a ceiling of EUR 0.40. Recycled content leaves the design scheme and moves to a separate Circulaire Plastics regulation that pays by category and by origin. In 2026 one regulation paid up to EUR 0.60 per kg for both.
The design steps are worth the same as before, but the rules around them are not. The 2027 text admits a unit whose plastic is at least 50% of its weight, where the 2026 text asked for more than 50%; it narrows the substances a unit may not have touched to silicone and cement; it renames the Recyclecheck as Verpact’s own; and it excludes the business-packaging route by name (Exhibit 2).
The money moves on recycled content. A non-contact-sensitive pack with 20% to 35% recycled plastic earned EUR 0.20 per kg in 2026 and earns EUR 0.05 in 2027, on SPI’s reading of the Circulaire Plastics text, and recyclate from outside European OECD states earns a quarter of the circular discount. On SPI’s 130-tonne plastic portfolio, unchanged list rates and unchanged packs still lift the 2027 bill 12.2%, to EUR 110,600 (Exhibit 9).
For leaders the to-do list is short and dated. Re-test every plastic unit against the 2027 entry conditions before the first 2027 production runs, finish the design steps that are cheapest to reach, move recyclate contracts to European OECD origin where the tray or bottle is contact-sensitive, and keep the evidence for seven years. SPI’s scenarios show that those moves turn a 12.2% rise into a 5.6% fall (Exhibit 10).
Key findings
- Verpact’s 2027 table keeps glass at EUR 0.100, paper and board at EUR 0.017, rigid plastic at EUR 1.220, flexible plastic at EUR 1.320, other metals at EUR 0.360 and wood at EUR 0.015 per kg, and raises aluminium from EUR 0.340 to EUR 0.380 and drinks cartons from EUR 0.920 to EUR 1.110 (Verpact Tarieven, as reported on 7 October 2026).
- The 2027 Design for Recycling regulation pays EUR 0.10 per kg for each of four steps, up to EUR 0.40 per kg, on the rigid and flexible plastic tariffs only; deposit packaging, indirect export and the business-packaging route are excluded (Verpact, September 2026).
- SPI calculation: four design steps cut the plastic rate per kilo to EUR 0.82 for rigid and EUR 0.92 for flexible packaging, 32.8% and 30.3% below list (Exhibit 3).
- SPI calculation: one design step is worth EUR 100 per million packs for each gram of plastic in the pack, so a 10 g tub earns EUR 4,000 per million units at four steps (Exhibit 4).
- SPI calculation: a non-contact-sensitive pack at 20% to 35% recycled content loses EUR 0.15 per kg in 2027, a 24.2% rise in its net rate if it is rigid and meets all four design steps (Exhibit 5).
- SPI calculation: Verpact’s own dessert-pack example, 18.02 g with a carton sleeve, is 48.8% plastic by weight and so falls outside the 2027 Design for Recycling scheme at its first test (Exhibit 6).
- SPI calculation: on a 130-tonne plastic portfolio the 2027 bill rises from EUR 98,600 to EUR 110,600 with unchanged packs, and falls to EUR 93,100 if two design and sourcing moves are made (Exhibits 9 and 10).
The 2027 Verpact fee table
Verpact sets one EUR per kg tariff for each material, excluding VAT, and publishes the next year’s table in September. The 2027 table appeared with Verpact’s news item on circular plastics, dated 28 September 2026 in SPI’s records, and the trade press followed: KVNW, the Dutch wine merchants’ association, reported the direction of each line on 29 September, and on 7 October 2026 CostManagement printed the full list and Kunststof Magazine the plastic lines. Both match the figures SPI recorded from Verpact’s tariff page on 23 October 2026 (Exhibit 1).
Kunststof Magazine reported that the system contribution and the single-use plastic (SUP) surcharge stay at their 2026 levels. CostManagement gives the SUP figure as EUR 2.10 per 1,000 items, the rate Verpact’s 2026 policy, version 3.3, sets in its section 4.1.9 for drinking cups, drinks packaging, rigid and flexible food packaging and carrier bags. That charge is per item and sits outside every discount discussed here.
The spread inside the table explains why the plastic discount matters more than any other Dutch fee rule. Flexible plastic costs 77.6 times paper and board per kilo, and rigid plastic 71.8 times, by SPI’s calculation. The new bottle line is 2.13 times the rigid rate. Plastic tonnes, not total weight, set almost any Dutch bill, a point SPI’s EPR fees per tonne piece makes across 14 markets.
A business-packaging route. Verpact also prints composite rates for bedrijfsverpakkers, producers whose packaging is mostly discarded by business end users. CostManagement gives them as EUR 0.2319 per kg for rigid and EUR 0.2499 for flexible plastic, EUR 0.0303 for glass and EUR 0.0154 for paper and board in both years, with aluminium rising from EUR 0.0735 to EUR 0.0807. The 2027 Design for Recycling and Circulaire Plastics regulations both name the bedrijfsverpakkersregeling as excluded, so a producer on that route earns no plastic discount.
What it means for “prijs plastic per kilo”. Search Console shows Dutch buyers typing the plain question of what plastic costs per kilo. For packaging fees, the 2027 answer has three list prices, EUR 1.22, 1.32 and 2.60, and a set of net prices below them that depend on design and content. Exhibit 3 shows the design side.
Verpact tariefdifferentiatie 2027: how Design for Recycling differs from 2026
The legal basis has not changed. Both the 2026 regulation and the 2027 Design for Recycling regulation rest on Article 1.3 of Annex 1 to the Afvalbeheerbijdrageovereenkomst Verpakkingen (ABBO), the agreement the state declared generally binding, read with Verpact’s policy. The 2026 text replaced the 2025 regulation, which expired on 31 December 2025; the 2027 text, dated September 2026, says it is reviewed annually.
The history of the ceiling shows how the reward has been rebuilt. Verpact’s 2026 policy records a maximum plastic discount of EUR 0.50 per kg in 2024 and EUR 0.60 in 2025 and 2026. In 2027 the design steps are capped at EUR 0.40 and recycled content is paid separately. Verpact’s 2027 material, as reported by KVNW and CostManagement, gives a combined maximum of EUR 1.18 per kg when both schemes are added; SPI’s Verpact fees piece sets out the Circulaire Plastics categories in full.
Exhibit 2 compares the two texts clause by clause.
| Clause | 2026 regulation | 2027 Design for Recycling |
|---|---|---|
| Structure | One regulation: recycled content step plus four design steps | Design steps only; recycled content in a separate Circulaire Plastics regulation |
| Ceiling | EUR 0.60 per kg, including EUR 0.20 for recycled content | EUR 0.40 per kg |
| Plastic share of the unit | More than 50% of weight | At least 50% of weight |
| Target material share | At least 70% PET, PE, PP or PE/PP | At least 70%, same list, recycled and biobased variants included |
| Contacts that rule a unit out | Paint, latex, silicones or cement | Silicone or cement |
| Rigid definition | Stiff, typically over 180 micron, same shape empty as full | Size only: over 3 cm and up to 5 litres |
| Recyclecheck step | KIDV Recyclecheck for the current year, result good recyclable | Verpact Recyclecheck for rigid or flexible plastic, result good recyclable |
| Named exclusions | Deposit, indirect export, other tariff discounts | Deposit, indirect export, bedrijfsverpakkersregeling, other tariff discounts |
| Value of each design step | EUR 0.10 per kg | EUR 0.10 per kg |
Source: Verpact: Regeling Tariefdifferentiatie Plastic 2026; Tariefdifferentiatie Plastic Design for Recycling 2027 (September 2026); Beleid Verpact 2026, sections 4.1.6 and 7.2 (SPI summary), checked 22 Nov 2026.
SPI's reading of the published Dutch texts, consulted 8 November 2026. Not legal advice; the regulations themselves govern.
Three of the rewrites matter in practice.
The 50% line now includes the boundary. In 2026 a unit that was exactly half plastic by weight failed the entry test; in 2027 it passes. The difference touches few packs, but it is the kind of edge case that decides a claim on a laminated or sleeved format. The 2027 text also keeps the condition that the weight of every material in the unit is recorded, which is what makes the share testable.
Fewer contact exclusions. The 2026 text barred units that had been in direct contact with paint, latex, silicones or cement, which in practice ruled out paint tins and similar trade packs. The 2027 text names only silicone and cement. On SPI’s reading, a plastic paint bucket that meets the other tests can now earn design steps; SPI has not yet confirmed that Verpact intends this reading, and a producer should check it before claiming.
A Verpact Recyclecheck, for plastic only. The Recyclecheck was built by the Kennisinstituut Duurzaam Verpakken (KIDV), whose work Verpact has fully absorbed, according to a trade report of 1 August 2025. The 2027 regulation names the Verpact Recyclecheck for rigid and for flexible plastic packaging, and KVNW reports that from 2027 Verpact will offer the Recyclecheck for plastic packaging only. For a pack that relies on a Recyclecheck result from an earlier version, the safe course is to re-run it under the 2027 tool.
The rest is continuity. Mono-material still means at least 95% PET, PE or PP for rigid units, with PET held to a stricter test that allows no layers of other materials, and at least 90% PE or PP for flexible units, with additives capped at 5% and 10%. Colour still means at least 90% of the target material natural, colourless or white, with clear PET only for PET and a slight blue tint allowed to mask yellowing. Labels, sleeves and in-mould labels must still be PE or PP with no PET, paper or aluminium layers, and must cover less than 50% of a rigid unit under 500 ml, less than 70% above 500 ml and less than 30% of a flexible unit. The 2027 text adds that a PE label on a flexible PP pack is acceptable; SPI has not yet confirmed whether the 2026 text allowed the same.
What the design steps are worth per kilo
Each design step takes EUR 0.10 off the list rate for every kilo of plastic in the unit, and a missed step does not block the others. Exhibit 3 shows the resulting net plastic price per kilo for 2027.
| Design steps met | Rigid plastic | Flexible plastic | Off list, rigid (%) | Off list, flexible (%) |
|---|---|---|---|---|
| None | 1.22 | 1.32 | 0.0 | 0.0 |
| One | 1.12 | 1.22 | 8.2 | 7.6 |
| Two | 1.02 | 1.12 | 16.4 | 15.2 |
| Three | 0.92 | 1.02 | 24.6 | 22.7 |
| All four | 0.82 | 0.92 | 32.8 | 30.3 |
Source: SPI calculation from Verpact Tarieven 2027 and Tariefdifferentiatie Plastic Design for Recycling 2027 (SPI summary), checked 22 Nov 2026.
EUR only, one scheme. Before the Circulaire Plastics discount and the 50,000 kg allowance. The bottle line of EUR 2.60 is not shown, because the regulation applies the discount to the rigid and flexible plastic tariffs; SPI has not yet confirmed how Verpact treats the bottle line.
The table is symmetric in euro and asymmetric in percent. A step is worth EUR 0.10 everywhere, so it is worth slightly more in relative terms on rigid packaging. A fully designed flexible pack still costs EUR 0.10 per kg more than a fully designed rigid one, and EUR 0.30 less than an undesigned rigid one.
SPI analysis
The 2026 ceiling of EUR 0.60 was worth 49.2% of the rigid rate, so the headline reward for design alone has not fallen in 2027; it was always EUR 0.40. What has changed is that a pack can no longer use recycled content to reach the old ceiling inside one scheme, and the separate content scheme pays very different amounts by category. SPI’s rigid plastic piece sets the Dutch steps beside five other euro schemes, where a full sleeve on a clear PET bottle moves the fee far more in Belgium, Italy and France than in the Netherlands.
What a step is worth per pack
A buyer does not pay per kilo; it buys packs. Exhibit 4 converts the step value into money per million units for four pack weights, so a design team can set the fee saving against tooling or artwork costs.
| Plastic per pack | One step, EUR per million packs | Four steps, EUR per million packs | Four steps, euro cent per pack |
|---|---|---|---|
| 5 g | 500 | 2,000 | 0.20 |
| 10 g | 1,000 | 4,000 | 0.40 |
| 25 g | 2,500 | 10,000 | 1.00 |
| 50 g | 5,000 | 20,000 | 2.00 |
Source: SPI calculation from Tariefdifferentiatie Plastic Design for Recycling 2027 (EUR 0.10 per kg per step, cap EUR 0.40) (SPI summary), checked 22 Nov 2026.
EUR only. Plastic weight per pack is the weight on which the plastic tariff is paid. Pack weights are SPI assumptions chosen to span common formats, not market data.
The arithmetic is simple and unforgiving. A step is EUR 0.10 per kg, which is 0.01 euro cent per gram, so the fee signal on a single light pack is a fraction of a cent. It becomes material on volume: a dairy brand selling 50 million 10 g tubs a year in the Netherlands would earn EUR 200,000 a year at four steps, by SPI’s calculation, and lose EUR 50,000 for each step it misses.
SPI analysis
The per-pack view separates two kinds of design step. Colour and label changes usually cost little once an artwork cycle comes round, so even a few thousand euro per million packs can pay for them. A mono-material change that needs new tooling or a new barrier structure is a capital decision, and the Dutch fee alone will rarely pay for it on a light pack; the case for it rests on the PPWR recyclability grades that apply from 2030 at the earliest, not on Verpact’s discount.
Who loses in 2027 although the rates stay flat
The split matters most to packs that claimed the 2026 recycled content step. In 2026 that step paid EUR 0.20 per kg for post-consumer recycled content of at least 10% in contact-sensitive packaging, meaning packs in contact with food for people or animals or with skin, or at least 20% in other packaging. In 2027 the Circulaire Plastics regulation pays by category instead. Its text, as read by SPI, gives EUR 0.20 per kg for contact-sensitive PET up to 30% content, EUR 0.20 for contact-sensitive non-PET up to 10%, EUR 0.20 for contact-sensitive drink bottles outside deposit up to 30%, and EUR 0.05 for non-contact-sensitive packaging up to 35%, with higher amounts above those shares and ceilings of EUR 0.78, 0.65, 0.78 and 0.3375 per kg.
Two further rules cut the value. Recyclate from production waste does not count. And origin matters: material from a European OECD member state earns the full Circulaire Plastics discount, while material from any other country earns a quarter of it. The 2026 regulation, on SPI’s reading, set no origin condition.
Exhibit 5 applies both regulations to seven typical claims.
| Pack and claim | Discount 2026 | Discount 2027 | Net rate 2026 | Net rate 2027 | Change in net rate (%) |
|---|---|---|---|---|---|
| Contact-sensitive PP tub, 10% European recyclate, four steps | 0.60 | 0.60 | 0.62 | 0.62 | 0.0 |
| Non-contact rigid HDPE bottle, 25% European recyclate, four steps | 0.60 | 0.45 | 0.62 | 0.77 | 24.2 |
| Contact-sensitive PET tray, 30% European recyclate, three steps | 0.50 | 0.50 | 0.72 | 0.72 | 0.0 |
| Contact-sensitive PET tray, 30% non-European recyclate, three steps | 0.50 | 0.35 | 0.72 | 0.87 | 20.8 |
| Non-contact flexible PE film, 25% European recyclate, two steps | 0.40 | 0.25 | 0.92 | 1.07 | 16.3 |
| Non-contact flexible PE film, no recyclate, four steps | 0.40 | 0.40 | 0.92 | 0.92 | 0.0 |
| Multi-material pack under 50% plastic | 0.00 | 0.00 | 1.22 | 1.22 | 0.0 |
Source: SPI calculation from Verpact Tarieven, Regeling Tariefdifferentiatie Plastic 2026, and the 2027 Design for Recycling and Circulaire Plastics regulations (SPI summary), checked 22 Nov 2026.
EUR only. Discount is design steps plus recycled content reward. Recycled content shares sit inside the entry bands of the 2027 Circulaire Plastics text, so no increments above the entry share are used. Pack examples are SPI assumptions. Before the 50,000 kg allowance.
The pattern is clear. Packs with no recycled content, and contact-sensitive packs with European recyclate inside the entry bands, see no change. Non-contact packs with modest recycled content and any pack using non-European recyclate lose EUR 0.15 per kg, which raises their net rate by 16.3% to 24.2%.
SPI analysis
The 2027 design is deliberate. Verpact’s news of 28 September 2026 says the new stimulus targets circular plastics from Europe and renewable raw materials, and CostManagement links the category structure to the PPWR’s recycled content targets under Article 7, which start in 2030 and are hardest to meet in food-contact plastic. For non-contact packaging, where recyclate is easier to buy, Verpact now pays little at low shares and more only at higher ones. A brand that set its non-contact packs at 20% recyclate to meet the 2026 rule has lost most of the reward for it.
SPI has not yet confirmed the increments above the entry shares. The regulation text, as SPI reads it, describes the non-contact increment as EUR 0.025 per percentage point above 35%, which would reach the EUR 0.3375 ceiling at about 46.5%; a consultancy table published on 7 October 2026 shows a smoother path for the same category. Verpact points producers to its Rekentool Circulaire Plastics for exact values, and SPI’s scenarios use only the entry bands, where the sources agree.
In practice: what the entry test does to a real pack
In practice: Verpact.
In an April 2026 design-for-recycling presentation with Wageningen University and Research (WUR), Verpact used a dessert pack as its worked example: a PP cup of 5.49 g, a printed and varnished carton sleeve of 8.24 g, a coated aluminium sealing foil of 0.79 g, a PP lid of 3.31 g and 0.19 g of hotmelt glue, about 18.02 g in all. The presentation lists the components and the problems they cause in sorting; it does not state a Verpact discount outcome. Exhibit 6 applies the 2027 rules to the published weights.
| Component | Weight (g) | 2027 line | Rate, EUR per kg | Fee, euro cent per pack |
|---|---|---|---|---|
| PP cup | 5.49 | Rigid plastic | 1.220 | 0.670 |
| PP lid | 3.31 | Rigid plastic | 1.220 | 0.404 |
| Carton sleeve | 8.24 | Paper and board | 0.017 | 0.014 |
| Aluminium sealing foil | 0.79 | Aluminium | 0.380 | 0.030 |
| Hotmelt glue | 0.19 | Not priced by SPI | no data | no data |
| Whole pack | 18.02 | Mixed | no data | 1.118 |
Source: Verpact and WUR, Design for recycling, Empack presentation, April 2026 (component weights); SPI calculation at Verpact Tarieven 2027 (SPI summary), checked 22 Nov 2026.
EUR only. SPI treats all components as one disposal unit and prices each at its 2027 material line; how Verpact declares the glue is not stated, so it is not priced. If the glue counted as plastic the plastic share would be 49.9%, still below 50%.
Plastic is 8.80 g of 18.02 g, or 48.8%, so the pack misses the 50% entry test before any design step is checked. It also misses the second test: PP is 48.8% of the unit against the 70% target material share required. On SPI’s arithmetic, the non-PP parts would have to fall to 3.77 g or less to pass, which means a sleeve of no more than 2.79 g, a cut of 66.1%, or no sleeve at all.
Without the sleeve the unit weighs 9.78 g, PP is 90.0% of it, and the pack becomes eligible to earn steps. At four steps the discount would be 0.352 euro cent per pack, or EUR 3,520 per million packs, which is 31.5% of the whole pack’s current fee. The board sleeve itself costs only 0.014 euro cent per pack in Verpact fees, so the Dutch fee case for removing it rests on the plastic discount the sleeve blocks, not on the board’s own charge.
SPI analysis
The example shows why the entry conditions, not the four steps, are where most design value is won or lost. A pack that is mostly paper by weight but sold as a plastic cup sits outside the scheme however clean its plastic is. The same 70% target material share appears in the CEN proposal that Verpact and WUR present for the PPWR, where packs under 70% would be barred from 2030 and those under 80% discouraged; SPI’s PPWR grades piece explains how those classes are meant to work.
A framework: the four rungs of the Dutch plastic discount
SPI places every plastic unit on one of four rungs, each defined by the 2027 texts and each with a different first move (Exhibit 7).
| Rung | Test | Discount, EUR per kg | Typical cause | First move |
|---|---|---|---|---|
| 1. Outside the gate | Fails an entry condition: plastic under 50%, target material under 70%, PVC, PVdC, PETG, oxo-degradable or silicone-like content, size limits, or contact with silicone or cement | 0.00 | Sleeves, foils or other materials outweigh the plastic | Change the structure, or accept the list rate |
| 2. Partial design | Through the gate, one to three steps | 0.10 to 0.30 | Dark or coloured plastic, oversized or PET labels | Fix colour and labels at the next artwork cycle |
| 3. Full design | All four steps, including a good Recyclecheck result | 0.40 | None in design | Keep the evidence file and re-run the Recyclecheck |
| 4. Design plus circular content | Full design and recycled or biobased content | 0.45 to 1.18 | Content share and origin set the total | Contract European OECD recyclate in contact-sensitive formats |
Source: SPI analysis of Tariefdifferentiatie Plastic Design for Recycling 2027 and Circulaire Plastics 2027, Verpact, September 2026 (SPI summary), checked 22 Nov 2026.
EUR per kg of plastic, 2027. The rungs are SPI's planning segmentation, not Verpact categories. Circulaire Plastics ranges run from the non-contact entry amount to the contact-sensitive PET ceiling at European OECD origin.
The rungs read best from the bottom. A unit on rung 1 earns no design steps. Whether it can still earn content credit depends on the Circulaire Plastics regulation’s own conditions; as SPI reads that text, it sets no 50% plastic entry test of its own. A unit on rung 2 has the cheapest gains available. Rung 3 is where most well-run portfolios should aim for every high-volume pack. Rung 4 is a sourcing decision as much as a design one.
SPI analysis
The ladder also maps the PPWR. Rungs 1 and 2 are where packs at risk of a low PPWR recyclability grade are likely to sit, because the same features that fail Verpact’s gate, multi-material structures and disruptive substances, lower a design-for-recycling score. Article 6 of Regulation (EU) 2025/40, tracked by SPI as PR-EU-010, applies its graded design test from 1 January 2030 or 24 months after the criteria acts, whichever is later. Verpact’s steps are not a PPWR grade, but they are the closest fee signal Dutch producers have today.
The evidence Verpact asks for
The discount is claimed, not granted. A producer completes the relevant parts of its afvalbeheerbijdrage declaration and submits it, digitally signed, before 1 April of the following year; for 2027 packaging that means before 1 April 2028. Exhibit 8 lists what the 2027 Design for Recycling regulation asks a producer to hold.
| Test or step | What to hold |
|---|---|
| Entry conditions | Weight of each material in the unit; supplier specifications on material composition |
| Mono-material | Supplier specifications showing target material and additive shares |
| Colour | Supplier specifications on the colour of the target material |
| Labels, sleeves and print | Label and ink specifications; a coverage printout from the NTCP tool where relevant; signed supplier declarations on carbon black, coatings and adhesives where specifications are incomplete |
| Recyclecheck | The Verpact Recyclecheck result showing good recyclable |
| Every claim | A photo or sample of the unit; all records kept at least seven calendar years |
Source: Verpact: Tariefdifferentiatie Plastic Design for Recycling 2027 (September 2026) (SPI summary), checked 22 Nov 2026.
SPI summary of the evidence clauses. Business guidance, not legal advice; the regulation governs.
The seven-year rule matters because Verpact can check a declaration after filing; its 2026 policy allows checks for five years. A claim without a supplier declaration on carbon black or adhesives is the most likely to fail, because those are the details converters least often put in a standard specification.
The 2027 text also opens an innovation route for producers whose packaging uses a new material, process or technique with demonstrable environmental benefits that is accessible to others, on a detailed plan submitted to Verpact. It refers to a reduced tariff for such packs, but SPI has not yet confirmed the amount, and the published text leaves the number of laboratory test hours as a placeholder.
Industry reaction
“Minimaal 50% van het gewicht van de weggooi-eenheid bestaat uit plastic.”
SPI’s translation: At least 50% of the weight of the disposal unit consists of plastic.
This is the first of the entry conditions, and Exhibit 6 shows how a single sleeve can decide it.
“Elk percentage PCR of biobased drop-in materiaal telt mee.”
SPI’s translation: Every percentage of PCR or biobased drop-in material counts.
The sentence explains the design of the content scheme: a sliding reward by share rather than the single threshold of 2026, with the share calculated per category of plastic in the declaration rather than per pack.
“Vanaf 2027 wordt de Recyclecheck van Verpact alleen nog aangeboden voor plastic verpakkingen.”
SPI’s translation: From 2027, Verpact’s Recyclecheck will be offered for plastic packaging only.
For wine and other goods sold in glass, the 2027 table holds the glass rate at EUR 0.100 per kg, and no design discount applies to glass at all.
“All packaging placed on the market shall be recyclable.”
The Commission reads that sentence as applying from 12 August 2026, while the graded tests that will give it numbers come in 2030 and 2035 at the earliest.
A portfolio through both years
To show the combined effect, SPI priced one assumed plastic portfolio through the 2026 and 2027 rules. The producer places 50 tonnes of contact-sensitive PP tubs with 10% European recyclate and all four steps, 30 tonnes of contact-sensitive PET trays with 30% recyclate from outside Europe and three steps, and 50 tonnes of non-contact PE film with 25% European recyclate and two steps (Exhibit 9).
| Line | kg | List bill | Net 2026 | Net 2027 | Change (EUR) |
|---|---|---|---|---|---|
| PP tubs, rigid | 50,000 | 61,000 | 31,000 | 31,000 | 0 |
| PET trays, rigid | 30,000 | 36,600 | 21,600 | 26,100 | 4,500 |
| PE film, flexible | 50,000 | 66,000 | 46,000 | 53,500 | 7,500 |
| Total | 130,000 | 163,600 | 98,600 | 110,600 | 12,000 |
Source: SPI calculation from Verpact Tarieven 2026 and 2027, Regeling Tariefdifferentiatie Plastic 2026, and the 2027 Design for Recycling and Circulaire Plastics regulations (SPI summary), checked 22 Nov 2026.
EUR only. Portfolio is an SPI assumption, not a real company. Net equals kg times list rate less kg times discount. Before the 50,000 kg allowance, SUP charges and other materials.
The list bill is EUR 163,600 in both years. The 2026 discounts take EUR 65,000 off it; the 2027 discounts take EUR 53,000. The tubs are unaffected because contact-sensitive non-PET at 10% earns EUR 0.20 in both years. The trays lose EUR 0.15 per kg because their recyclate is non-European. The film loses EUR 0.15 per kg because it is non-contact at 25%. The net bill rises 12.2% although no Verpact list rate for plastic moved.
Scenarios: what the producer can win back
Exhibit 10 sets four 2027 cases for the same portfolio against its 2026 net bill of EUR 98,600.
| Scenario | 2027 net bill | Change against 2026 (%) |
|---|---|---|
| Downside: tubs lose the Recyclecheck step | 115,600 | 17.2 |
| Low: packs unchanged | 110,600 | 12.2 |
| Base: film reaches four steps | 100,600 | 2.0 |
| High: base plus European recyclate and a fourth step on trays | 93,100 | -5.6 |
Source: SPI calculation from Verpact Tarieven 2027 and the 2027 Design for Recycling and Circulaire Plastics regulations (SPI summary), checked 22 Nov 2026.
EUR only. Low: packs unchanged (Exhibit 9). Downside: low case, and the PP tubs lose their good Recyclecheck result. Base: low case, and the film reaches all four design steps. High: base case, and the trays move to European OECD recyclate and reach a fourth step. Scenarios are SPI assumptions, not forecasts.
The base case needs only design work on the film, colour and labels, worth EUR 10,000 a year. The high case adds a sourcing change on the trays worth EUR 4,500, from the origin rule, and one more design step worth EUR 3,000. The downside case shows the asymmetry of the scheme: a pack that slips one rung because its Recyclecheck result changes, or its evidence is incomplete, costs as much as a pack that never earned it.
SPI analysis
The scenarios use only the entry bands of the Circulaire Plastics text. Higher recycled content would earn more in the contact-sensitive categories, up to EUR 0.78 per kg for PET, but contact-sensitive recyclate is the scarcest and costliest grade, and SPI has not yet confirmed the increments. A finance team should budget on the base case, treat the high case as a target, and carry the downside as a risk on evidence.
In practice: Ahold Delhaize.
The SPI Buyers Database records that 15.7% of the group’s own-brand plastic product packaging was made of recycled content in 2024, against a 25% goal for 2025, and that 33% of its primary own-brand plastic packaging was reusable, recyclable or compostable in 2024. Its Standards of Engagement, version 5.0, in effect from 1 January 2026, ask suppliers to use recycled content and design for local recyclability. Those are group-wide averages, not Verpact claims, but they show the scale of the gap: an average in the teens sits inside the 2027 entry bands, where the reward now depends on whether each pack is contact-sensitive and where its recyclate comes from.
Where the Dutch plastic tax fits
Search Console shows Dutch demand for “plastic tax nederland”. The Verpact fee is not a tax: it is a producer contribution under the Besluit beheer verpakkingen 2014 and a generally binding agreement. The cabinet dropped its planned plastic levy and circular plastic norm in June 2025, and the Belastingplan 2027 before parliament adds no plastic packaging levy; SPI’s news report on the Belastingplan 2027 covers the vote set for 12 November 2026 and the waste tax path, and the Verpact fees piece sets out what was decided, proposed and dropped. For 2027 the plastic price signal a Dutch producer pays on its packaging is Verpact’s, and the discount is its most controllable part.
- past
- next
- Plastic discount capped at EUR 0.50 per kgpast
- Cap rises to EUR 0.60 per kgpast
- 2026 regulation: recycled content and design in one schemepast
- PPWR applies; Article 6(1) recyclability dutypast
- Verpact publishes 2027 tariffs and discountspast
- 2027 tariffs; Design for Recycling and Circulaire Plastics applynext
- Last day to file 2026 declarations under the combined schemenext
- PPWR Article 6(4) criteria acts duenext
- Last day to file 2027 declarations, first under the split schemesnext
- Earliest date for PPWR design-for-recycling gradesnext
Source: Beleid Verpact 2026; Verpact regulations 2026 and 2027; Verpact news, 28 September 2026; Commission Notice C/2026/3084 (SPI summary), checked 22 Nov 2026.
Dates as stated in each source, read on 8 November 2026. Declaration dates are the last day before Verpact's deadline of 1 April.
Show the data
| Date | Label | Category | Link |
|---|---|---|---|
| 2024-01-01 | Plastic discount capped at EUR 0.50 per kg | past | https://www.verpact.nl/sites/default/files/2026-01/Beleid%202026_concept.pdf |
| 2025-01-01 | Cap rises to EUR 0.60 per kg | past | https://www.verpact.nl/sites/default/files/2026-01/Beleid%202026_concept.pdf |
| 2026-01-01 | 2026 regulation: recycled content and design in one scheme | past | https://www.verpact.nl/sites/default/files/2026-08/Regeling%20Tariefdifferentiatie%20Plastic%202026.pdf |
| 2026-08-12 | PPWR applies; Article 6(1) recyclability duty | past | https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52026XC03084 |
| 2026-09-28 | Verpact publishes 2027 tariffs and discounts | past | https://www.verpact.nl/nl/actueel/nieuws-extra-stimulans-voor-inzet-van-circulaire-plastics-uit-europa |
| 2027-01-01 | 2027 tariffs; Design for Recycling and Circulaire Plastics apply | next | https://www.verpact.nl/sites/default/files/2026-09/VRP_Tariefdifferentiatie_DesignforRecycle_2.pdf |
| 2027-03-31 | Last day to file 2026 declarations under the combined scheme | next | https://www.verpact.nl/sites/default/files/2026-08/Regeling%20Tariefdifferentiatie%20Plastic%202026.pdf |
| 2028-01-01 | PPWR Article 6(4) criteria acts due | next | https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52026XC03084 |
| 2028-03-31 | Last day to file 2027 declarations, first under the split schemes | next | https://www.verpact.nl/sites/default/files/2026-09/VRP_Tariefdifferentiatie_DesignforRecycle_2.pdf |
| 2030-01-01 | Earliest date for PPWR design-for-recycling grades | next | https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52026XC03084 |
What leaders should do now
- Packaging development leads, before the first 2027 production runs: re-test every plastic unit against the 2027 entry conditions, at least 50% plastic, at least 70% target material, no PVC, PVdC, PETG or silicone-like content, and the size limits, and list every unit that sits outside the gate.
- Packaging development leads, at the next artwork cycle in 2027: close the colour and label steps on high-volume packs first, because Exhibit 4 shows a 10 g pack earns EUR 1,000 per million units for each step and these steps rarely need new tooling.
- Sustainability teams, by 31 March 2027: re-run the Recyclecheck under Verpact’s 2027 tool for each pack that claims the fourth step, and file the result in the pack’s evidence folder.
- Procurement, in 2027 resin contracts: ask suppliers of recyclate for contact-sensitive trays and bottles to show European OECD origin under certification based on EN 15343, since non-European material earns a quarter of the content discount.
- Procurement, at the next supplier review: require converters to supply signed declarations on carbon black, coatings and adhesives, and an NTCP coverage printout for labels, so that no step is lost for lack of paper.
- Finance directors, in the 2027 budget: re-price non-contact packs that claimed the 2026 recycled content step at 20% to 35% content, which lose EUR 0.15 per kg, and carry the portfolio as a range like Exhibit 10.
- Compliance teams, by 31 March 2028: file the 2027 declaration with design and content claims split by scheme and by category, and keep the records for at least seven calendar years.
Questions for your board
- How many tonnes of our Dutch plastic sit outside the 2027 Design for Recycling entry test, and what do they cost at list rates?
- Which of our packs claimed the 2026 recycled content step, and how much of that reward survives the 2027 categories?
- Where does our recyclate come from, and what share of it is from European OECD states?
- Do we hold, for each claimed step, the evidence Verpact lists, and could we produce it in five years?
- Are our design steps on track for every high-volume pack, and which ones are held back by structure rather than artwork?
- How do our Verpact rungs line up with the PPWR grades we expect from 2030?
What to watch
- 12 Nov 2026: Tweede Kamer vote on the Belastingplan 2027, which contains no plastic packaging levy.
- End of 2026: Verpact’s evidence rules for biobased drop-ins under Circulaire Plastics, which the 2027 text says will be published at the end of 2026.
- 31 Dec 2026: last day of the combined 2026 scheme; packaging placed from 1 January 2027 falls under the split schemes.
- 31 Mar 2027: last day to file 2026 declarations, including 2026 plastic discount claims.
- 31 Dec 2027: the Afvalbeheerbijdrageovereenkomst Verpakkingen 2023 to 2027 reaches the end of its period; SPI has not yet confirmed the terms of a successor or of the 2028 discount rules.
- 1 Jan 2028: PPWR Article 6(4) criteria and grade acts due from the Commission.
- 31 Mar 2028: last day to file 2027 declarations, the first under Design for Recycling and Circulaire Plastics.
Methodology
- Data used: Verpact’s Tariefdifferentiatie Plastic Design for Recycling 2027 and Circulaire Plastics 2027 regulations (September 2026), the Regeling Tariefdifferentiatie Plastic 2026, Beleid Verpact 2026 version 3.3, Verpact’s tariff page and its news of 28 September 2026, the Verpact and WUR presentation of April 2026, trade reports by KVNW (29 September 2026), CostManagement and Kunststof Magazine (7 October 2026) and PRINTmatters, Commission Notice C/2026/3084, SPI’s Netherlands fee-market note and PR-EU-010 record (14 October 2026), and the SPI Buyers Database. Consulted 8 November 2026 unless stated.
- Tariff figures: Verpact presents its tariff table on an interactive page; SPI took the 2026 and 2027 figures from CostManagement’s reproduction of that table and checked them against Kunststof Magazine and against SPI’s record of the page of 23 October 2026. All three agree.
- Counting rules: EUR per kg as published, excluding VAT; net rate equals list rate less discount; per-pack figures equal plastic weight times rate. One currency throughout.
- Circulaire Plastics values: only the entry bands and ceilings are used. SPI has not yet confirmed the increments above the entry shares, where the regulation text and a consultancy table differ.
- Assumptions: pack weights in Exhibit 4, the seven claims in Exhibit 5 and the 130-tonne portfolio in Exhibits 9 and 10 are SPI assumptions. The dessert pack uses Verpact’s published weights and treats all components as one disposal unit, an SPI assumption.
- Cut-off: 8 November 2026.
- Limitations: SPI has not yet confirmed the 2027 Verpact policy text, how discounts apply to the EUR 2.60 bottle line, or the innovation route’s reduced tariff. This is business analysis, not legal or tax advice; confirm claims with Verpact and check with counsel where it applies.
FAQ
What is the Verpact tariefdifferentiatie in 2027?
It is the discount on Verpact’s rigid and flexible plastic tariffs. From 1 January 2027 it runs as two regulations: Design for Recycling, four steps of EUR 0.10 per kg capped at EUR 0.40, and Circulaire Plastics, which pays for recycled and biobased content by category and origin. List rates stay at EUR 1.22 and EUR 1.32 per kg.
What is the price of plastic per kilo under Verpact in 2027?
For packaging, the 2027 list price is EUR 1.22 per kg for rigid and EUR 1.32 for flexible plastic. Each Design for Recycling step takes EUR 0.10 off, so a fully designed pack pays EUR 0.82 or EUR 0.92. Recycled or biobased content can lower it further under a separate scheme.
How does the Verpact Design for Recycling discount work in 2027?
A plastic unit that is at least 50% plastic and 70% PET, PE or PP earns EUR 0.10 per kg for each of four steps: mono-material, colour, labels and print, and a good Recyclecheck result. The maximum is EUR 0.40 per kg. Deposit packaging, indirect export and business packagers are excluded.
Is there a plastic tax in the Netherlands in 2027?
No national plastic packaging tax applies in 2027. The cabinet dropped its planned plastic levy in June 2025, and the Belastingplan 2027 adds none. Producers pay Verpact’s packaging contribution instead, which is a producer fee, not a tax. The waste tax on incineration and landfill is a separate charge.
Which packs lose discount in 2027?
Non-contact-sensitive packs with 20% to 35% recycled content earned EUR 0.20 per kg in 2026 and earn EUR 0.05 in 2027, on SPI’s reading. Packs using recyclate from outside European OECD states earn a quarter of the content discount. Contact-sensitive packs with European recyclate inside the entry bands keep their 2026 value.
When do I claim the 2027 plastic discount?
Claims go in the annual afvalbeheerbijdrage declaration for 2027, submitted digitally signed before 1 April 2028. Producers must hold supplier specifications, declarations, a photo or sample and, where relevant, an NTCP coverage printout, and keep all records for at least seven calendar years.
Sources
- Verpact, Tariefdifferentiatie Plastic Design for Recycling 2027, Regeling, September 2026, consulted 2026-11-08.
- Verpact, Tariefdifferentiatie Plastic Circulaire Plastics 2027, Regeling, September 2026, consulted 2026-11-08.
- Verpact, Regeling Tariefdifferentiatie Plastic 2026, consulted 2026-11-08.
- Verpact, Beleid Verpact 2026, version 3.3, effective 1 January 2026, consulted 2026-11-08.
- Verpact, Tarieven, consulted 2026-11-08, with SPI’s record of 2026-10-23.
- Verpact, Extra stimulans voor inzet van circulaire plastics uit Europa, 28 September 2026, consulted 2026-11-08.
- Verpact and WUR, Design for recycling, Empack presentation, April 2026, consulted 2026-11-08.
- European Commission, Notice C/2026/3084 on the application of Regulation (EU) 2025/40, consulted 2026-11-08.
- KVNW, Verpact stelt tarieven verpakkingen voor 2027 vast, 29 September 2026, consulted 2026-11-08.
- CostManagement, Tarieven en Tariefdifferentiatie Plastic Verpact in 2027, 7 October 2026, consulted 2026-11-08.
- Kunststof Magazine, Verpact stelt tarieven 2027 vast en stimuleert gebruik Europees recyclaat, 7 October 2026, consulted 2026-11-08.
- PRINTmatters, Verpact publiceert tarieven en kortingen voor 2027, consulted 2026-11-08.
- Vakblad Voedingsindustrie, Verpact strengthens position with a single recognisable name, 1 August 2025, consulted 2026-11-08.
- SPI Regulation Tracker, PR-EU-010, PPWR recyclability, data as of 2026-10-14.
- SPI fee-market note for the Netherlands (Verpact), data as of 2026-10-14.
- SPI Packaging Buyers Database, Ahold Delhaize profile, data as of 2026-10-14.
- SPI Ledger, The Netherlands’ Verpact fees and the plastic tax debate, data as of 2026-10-23.
- SPI News, Belastingplan 2027 heads to a 12 November vote, 2026-11-05.