SPI Corrections Policy: How to Report an Error and What SPI Changes
To report an error in Strategic Packaging Insights (SPI) data, write to sales@strategicpackaginginsights.com or use the enquiry form, naming the page or row, what is wrong and the source that shows the correct fact; SPI checks it against the original source, corrects the row, logs the change with its date and tells you what it changed or why it did not.
Corrections at SPI are made against sources, not opinions, and the history of every rule stays visible. On 13 October 2026 the SPI team re-read 56 tracker records against their official sources and updated 46. That check is the worked example on this page: it changes the status of four US packaging laws, one New Zealand policy and one company target.
By the SPI team · Figures as of 13 October 2026
56
Tracker records re-read against their official source
13 October 2026
SPI record check, 13 October 2026
46
Tracker records updated
13 October 2026
SPI record check, 13 October 2026
5
Rule status changes from the check
PR-US-006, PR-US-007, PR-US-008, PR-US-011, PR-NZ-002
SPI Regulation Tracker
1
Company target status changes
Reckitt, 25% recycled content by 2025
SPI Buyers Database
Source: SPI Regulation Tracker and SPI Buyers Database, checked 14 Oct 2026.
Changes from the 13 October 2026 check are being published; until then the live pages show the earlier statuses.
Key facts
- SPI corrects a row only after a member of the SPI team has checked the report against the original source; the change is recorded in the row’s history with its date (SPI Corrections, 13 October 2026).
- A corrected row goes through the same second-person check as a new row before it is marked verified again, and the software does not let the person who last changed a row verify it (SPI Methodology, 13 October 2026).
- On 13 October 2026 the SPI team re-read 56 tracker records against their official sources and updated 46 (SPI record check, 13 October 2026).
- Minnesota’s Packaging Waste and Cost Reduction Act (PR-US-006), Maryland’s SB 901 (PR-US-007) and Washington’s Recycling Reform Act (PR-US-008) are being updated from “adopted” to “in force” in the 13 October check, because producer or PRO duties already apply (MPCA, Maryland General Assembly, Washington Legislature, consulted 13 October 2026).
- California SB 343 (PR-US-011) is being updated from “in force” to “adopted”, because a federal court preliminary injunction has blocked its enforcement since 14 July 2026 (CalRecycle, consulted 13 October 2026).
- Reckitt’s target of 25% recycled content in plastic packaging by 2025 is being updated from “behind” to “unknown” in the SPI Buyers Database, because the company has published its 2024 figure (12%) but not yet its 2025 result (Reckitt Sustainability Report 2025, consulted 13 October 2026).
How to report an error
Write to sales@strategicpackaginginsights.com or use the enquiry form. A report that can be checked quickly has three parts.
- Where. The page, and the row if there is one: a rule ID such as PR-US-008, a company name in the SPI Buyers Database, or a market and material in the SPI EPR & Plastic Tax Calculator.
- What. The field you think is wrong: a date, a status, a rate, a materials list, a quote or a summary.
- Why. A link to the source that shows the correct information, ideally the official text, the regulator’s page, the scheme’s fee table or the company’s own report.
You do not need to be sure. A report that says “this date looks wrong but I cannot find the source” is still useful, because it sends the row back for a check. Reports of missing rules are handled the same way: send the link to the official source and the team will assess it for the tracker.
What SPI does with a report
| Step | What happens | What you see |
|---|---|---|
| 1. Receive | The report reaches the SPI team member closest to the topic | An email reply, with clarifying questions if needed |
| 2. Check | The row is checked against its original source, and against any source you sent | Nothing yet |
| 3. Correct | If the row is wrong or out of date, the field is changed and the row returns to "Sourced" | The corrected field on the page |
| 4. Log | The change is recorded in the row's history with its date | An entry in the rule's history and in the tracker's list of latest changes |
| 5. Second check | A second SPI team member checks every field and the quote against the source | Once this check is done, the row is marked "Verified" with its check date |
| 6. Reply | SPI tells you what it changed, or why it did not change it | An email reply |
Source: SPI Corrections and SPI Methodology, checked 12 Nov 2026.
SPI does not give a fixed turnaround for corrections, because the time depends on the source: an official page that loads and states the fact settles a report quickly, while a contested date in a long legislative text may need more than one source.
What SPI does not do
- SPI does not delete a row’s history to hide a mistake. The earlier value stays in the history, with the date it changed.
- SPI does not change sourced facts at the request of the companies or bodies they describe unless the source supports the change. A company that wants its target status changed should point to the report that shows the new figure.
- SPI does not treat a correction as legal advice. A corrected status says what the official source shows; whether an obligation applies to a particular business should be confirmed with qualified counsel and the relevant compliance scheme.
Corrections, updates and status changes
Three kinds of change reach the history of a row, and they are logged the same way.
| Kind of change | What it means | Example |
|---|---|---|
| Correction | The row did not match its source when it was published | A date read from the wrong section of a statute |
| Update | The source has changed since the row was checked | A regulator publishes a new timetable or fee table |
| Status change | The facts are unchanged, but a closer reading of them moves the rule between statuses | A law whose producer duties have started moves from “adopted” to “in force” |
SPI analysis
Many changes that look like errors are updates: the law or fee table moved after the row was checked. That is why each row shows the date it was last checked. A row checked last week and a law amended yesterday can both be right on their own dates.
How SPI uses the five rule statuses
Status separates enacted rules from proposals, so a draft is never shown as law. The worked examples below turn on where the line between “adopted” and “in force” sits.
| Status | SPI usage |
|---|---|
| In force | Enacted, and at least one obligation on producers or schemes applies and can be enforced now |
| Adopted | Enacted, but its obligations have not started or cannot currently be enforced |
| Proposed | Not enacted, or a policy with no date set |
| Expired | Repealed or replaced |
| Withdrawn | Abandoned by the body that proposed it |
As of 13 October 2026, the live tracker shows 60 rules in force, 13 adopted, 4 proposed and 2 expired, out of 79. These counts update by themselves as the changes below are published.
Corrections log
- 13 October 2026: 56 records re-read against official sources, 46 updated. The worked examples below come from this check.
Worked examples: the 13 October 2026 check
On 13 October 2026 the SPI team re-read 56 tracker records against their official sources and updated 46. The changes below are being made in that check; until they are published, the live rule pages show the earlier status.
| Rule | Law | Status before the check | Status from the check | Reason, from the official source |
|---|---|---|---|---|
| PR-US-006 | Minnesota Packaging Waste and Cost Reduction Act | Adopted | In force | Producers must be PRO members from 1 July 2025 (MPCA) |
| PR-US-007 | Maryland SB 901 (Chapter 431, 2025) | Adopted | In force | Act in effect since 1 June 2025; PRO registration duty from 1 July 2026 (Chapter 431, MDE) |
| PR-US-008 | Washington Recycling Reform Act (SB 5284) | Adopted | In force | Producers had to appoint a PRO by 1 January 2026 and be members by 1 July 2026 (Chapter 70A.208 RCW) |
| PR-US-011 | California SB 343 recyclability labelling restrictions | In force | Adopted | Enforcement blocked by a preliminary injunction since 14 July 2026 (CalRecycle) |
| PR-NZ-002 | New Zealand Stage 3 plastic phase-out | Withdrawn | Proposed | Deadline removed on 18 December 2024, policy not dropped (Ministry for the Environment) |
Source: SPI Regulation Tracker; official sources as listed, consulted, checked 14 Oct 2026.
Minnesota (PR-US-006): adopted to in force
Minnesota’s Act requires producers of packaging, food packaging and paper products sold into Minnesota to be registered members of a producer responsibility organisation (PRO) from 1 July 2025, and MPCA accepted Circular Action Alliance’s (CAA) registration as the PRO (MPCA, consulted 13 October 2026). The row showed “adopted” because the costs arrive later: the first stewardship plan is due 1 October 2028 and producer funding phases in from 50% in February 2029. But a membership duty that already applies is an obligation in force, so the status is being changed. The same check removes a February 2025 date for CAA’s registration that the row gave: MPCA confirms the registration but states no date.
Maryland (PR-US-007): adopted to in force
Maryland’s SB 901 (Chapter 431 of 2025) took effect on 1 June 2025. From 1 July 2026 the PRO files an annual registration of producers, brands and materials with the Maryland Department of the Environment (MDE), and CAA set 31 May 2026 for producers to register and report (Maryland General Assembly; MDE; CAA, consulted 13 October 2026). The check also corrects who carries the registration duty: it sits with the PRO, not with each producer. The first plan is due 1 July 2028. With the Act in effect and the registration duty running, the status is being changed to in force.
Washington (PR-US-008): adopted to in force
Washington’s Recycling Reform Act was signed on 17 May 2025 and took effect on 27 July 2025. Under Chapter 70A.208 RCW, producers had to appoint a PRO by 1 January 2026 and be members of a registered PRO, or register an individual plan, by 1 July 2026 (Washington State Legislature, consulted 13 October 2026). Both dates have passed, so producer duties apply and the status is being changed to in force. The bigger date is still ahead: from 1 March 2029, producers outside a PRO in good standing may not introduce covered materials into the state.
California SB 343 (PR-US-011): in force to adopted
SB 343 (Chapter 507, Statutes of 2021) limits the chasing-arrows symbol and other recyclability claims on products and packaging manufactured after 4 October 2026 to items that meet California’s statutory criteria. On 14 July 2026 a federal court issued a preliminary injunction in California League of Food Producers v. Bonta (S.D. Cal., No. 3:26-CV-01675) that, according to CalRecycle, blocks enforcement of SB 343; CalRecycle’s study obligations continue (CalRecycle, consulted 13 October 2026). A rule that cannot currently be enforced is not “in force” in SPI’s usage, so the status is being changed to adopted, and the check adds the chapter citation to the row.
SPI analysis
This is the change most likely to be read the wrong way. “Adopted” does not mean SB 343 has gone away. It is still law, its 4 October 2026 date still stands on CalRecycle’s pages, and the outcome of the case will decide whether label changes are needed. Brand owners who prepare alternative artwork now can move quickly if the injunction is lifted, and lose little if it holds.
New Zealand (PR-NZ-002): withdrawn to proposed
The third stage of New Zealand’s plastic phase-out would have covered PVC and polystyrene food and drink packaging from mid-2025. On 18 December 2024 the Government removed that deadline so the Ministry could do more work on next steps, and no new date has been set (Ministry for the Environment, consulted 13 October 2026). A removed deadline is not a withdrawn policy, so the status is being changed to proposed, with no effective date.
When the underlying dates fell
- New Zealand
- United States
- SPI
- New Zealand removes the Stage 3 phase-out deadline (PR-NZ-002)New Zealand
- Maryland SB 901 takes effect (PR-US-007)United States
- Minnesota producers must be PRO members (PR-US-006)United States
- Washington Recycling Reform Act takes effect (PR-US-008)United States
- Washington producers must have appointed a PRO (PR-US-008)United States
- Washington PRO membership due; Maryland PRO registration starts (PR-US-008, PR-US-007)United States
- Preliminary injunction blocks SB 343 enforcement (PR-US-011)United States
- SB 343 manufacture date on CalRecycle's pages (PR-US-011)United States
- SPI re-reads 56 tracker records against their sources and updates 46SPI
Source: SPI Regulation Tracker; official sources as listed, checked 14 Oct 2026.
Show the data
| Date | Label | Category | Link |
|---|---|---|---|
| 2024-12-18 | New Zealand removes the Stage 3 phase-out deadline (PR-NZ-002) | New Zealand | /data/packaging-regulation-tracker/new-zealand/ |
| 2025-06-01 | Maryland SB 901 takes effect (PR-US-007) | United States | /data/packaging-regulation-tracker/united-states/ |
| 2025-07-01 | Minnesota producers must be PRO members (PR-US-006) | United States | /data/packaging-regulation-tracker/united-states/ |
| 2025-07-27 | Washington Recycling Reform Act takes effect (PR-US-008) | United States | /data/packaging-regulation-tracker/united-states/ |
| 2026-01-01 | Washington producers must have appointed a PRO (PR-US-008) | United States | /data/packaging-regulation-tracker/united-states/ |
| 2026-07-01 | Washington PRO membership due; Maryland PRO registration starts (PR-US-008, PR-US-007) | United States | /data/packaging-regulation-tracker/united-states/ |
| 2026-07-14 | Preliminary injunction blocks SB 343 enforcement (PR-US-011) | United States | /data/packaging-regulation-tracker/united-states/ |
| 2026-10-04 | SB 343 manufacture date on CalRecycle's pages (PR-US-011) | United States | /data/packaging-regulation-tracker/united-states/ |
| 2026-10-13 | SPI re-reads 56 tracker records against their sources and updates 46 | SPI | /data/packaging-regulation-tracker/ |
SPI analysis
The US EPR laws show the most common way a status falls behind. A law is entered as “adopted” when it is passed, and its first producer duty, usually PRO membership, starts a year or so later without any new document being published. A dated re-check against the statute catches that; waiting for a news event does not. SPI’s check therefore reads each rule’s start dates against the date of the check.
Worked example: a company target (Reckitt)
The SPI Buyers Database records 179 public packaging targets from 42 brand owners and retailers, each with the status the company’s own reporting supports. Reckitt reports packaging data a year in arrears: its Sustainability Report 2025 gives 2024 figures (Reckitt, consulted 13 October 2026).
| Target | By | Latest reported progress | Status before the check | Status from the check |
|---|---|---|---|---|
| 100% of plastic packaging recyclable or reusable | 2025 | 81% (2024); the company says it will not reach the 100% level | Missed | Missed |
| 25% recycled content in plastic packaging | 2025 | 12% (2024); the company expects to report slightly behind the 2025 target | Behind | Unknown |
| 50% reduction in virgin plastic packaging against 2020 | 2030 | 18% reduction (2024) | In progress | In progress |
Source: SPI Buyers Database; Reckitt Sustainability Report 2025, consulted, checked 13 Oct 2026.
The recycled-content target fell due in 2025, but Reckitt has published only its 2024 figure. “Behind” is not one of the statuses the database uses for a target past its date: a 2025 target is met, missed or, until the company publishes the result, unknown. The status is therefore being changed to unknown, and it will move to met or missed when Reckitt reports its 2025 figure. The recyclability target stays “missed”, because Reckitt itself says it will not reach the 100% level.
SPI analysis
“unknown” is a deliberate choice here, not a gap in SPI’s work. Reckitt’s own wording points to a miss, but the database records outcomes the company has reported, and SPI does not audit company figures. Readers comparing companies should treat a 2025 “unknown” as “result not yet published”.
How corrections appear on the site
- Rule history. Each rule’s page lists every addition, change, verification and removal with its date.
- Latest changes. The SPI Regulation Tracker shows rules added, changed, verified or removed, newest first.
- Review state. A changed row returns to “Sourced” and shows “Verified” again only after the second check.
- Last checked date. Every row shows the date its source was last consulted.
- Alerts. Readers signed up to the tracker’s weekly email alerts hear about changed rules in their chosen jurisdictions.
Corrections apply in the same way to the SPI Buyers Database and to the rate rows of the SPI EPR & Plastic Tax Calculator, where each rate shows its source and checked date and illustrative rates, such as the UK PackUK Year 2 fees, are flagged.
Corrections to consulting work
If an error is found in work SPI has delivered, SPI tells the organisation that commissioned it and issues a corrected version. Every SPI Consulting assignment already includes a check of numbers and sources by a second SPI team member before delivery, and corrections are logged.
Where corrections fit
Corrections keep the free SPI data usable at every stage of a packaging decision: Discover (SPI Buyers Database), Understand (SPI Regulation Tracker), Evaluate (SPI EPR & Plastic Tax Calculator), and Decide and Implement through SPI Consulting. The SPI Methodology describes the sourcing and review rules in full, Data Licensing explains how corrected data reaches licensees, and the Our team page explains how the two-person check is organised.
Frequently asked questions
How do I report an error in SPI data?
Write to sales@strategicpackaginginsights.com or use the enquiry form on the Contact page. Name the page or row, say what is wrong and, if you can, link the source that shows the correct information.
What happens after I report an error?
A member of the SPI team checks your report against the original source. If the row is wrong or out of date, it is corrected, the change is logged in its history with the date, and a second team member re-verifies it. SPI then tells you what it changed, or why it did not.
Will SPI change a company's data if the company asks?
Only if a source supports the change. SPI does not change sourced facts at the request of the companies or bodies they describe; a company should point to the report or filing that shows the new figure.
Why is California SB 343 listed as adopted and not in force?
A federal court preliminary injunction in California League of Food Producers v. Bonta has blocked enforcement of SB 343 since 14 July 2026, according to CalRecycle. SPI lists a rule that cannot currently be enforced as adopted. The law and its 4 October 2026 manufacture date remain on the books, so the status is being changed in the 13 October 2026 check rather than removed.
Why are the Minnesota, Maryland and Washington EPR laws now shown as in force?
Each already imposes a duty: PRO membership in Minnesota from 1 July 2025, PRO registration in Maryland from 1 July 2026, and PRO appointment and membership in Washington by 1 January and 1 July 2026. The 13 October 2026 check is updating PR-US-006, PR-US-007 and PR-US-008 from adopted to in force on that basis.
Why does a 2025 company target show as unknown?
Because the company has not yet published its 2025 result. Reckitt, for example, reports a year in arrears, so its 25% recycled-content target for 2025 is being changed to unknown until its 2025 figure appears; it will then show met or missed.
Does SPI delete old values when it corrects a row?
No. The history of each rule keeps every change with its date, and SPI does not delete a row’s history to hide a mistake.
Is a corrected SPI status legal advice?
No. A status records what the official source shows on the date it was checked. Whether an obligation applies to your business should be confirmed with qualified counsel and the relevant compliance scheme.
Sources
- SPI website, Corrections (theme 1.14.0): how to report an error, what SPI does and does not do, consulting deliverables. /corrections/ (as of 13 October 2026)
- SPI website, SPI Methodology: two-person review, history, status definitions. /methodology/ (as of 13 October 2026)
- SPI Regulation Tracker and SPI Buyers Database, 13 October 2026 check. /data/packaging-regulation-tracker/ and /data/packaging-buyers-database/
- MPCA, Packaging waste and cost reduction act fact sheet (PR-US-006). https://www.pca.state.mn.us/sites/default/files/w-ps1-05b%20.pdf (consulted 13 October 2026)
- MPCA, Packaging Waste and Cost Reduction Act (PR-US-006). https://www.pca.state.mn.us/business-with-us/packaging-waste-and-cost-reduction-act (consulted 13 October 2026)
- Maryland General Assembly, Chapter 431, SB 901 (PR-US-007). https://mgaleg.maryland.gov/2025RS/chapters_noln/Ch_431_sb0901E.pdf (consulted 13 October 2026)
- Maryland Department of the Environment, Producer Responsibility (PR-US-007). https://mde.maryland.gov/programs/land/WasteManagement/Pages/ProducerResponsibility.aspx (consulted 13 October 2026)
- Circular Action Alliance, Maryland (PR-US-007). https://circularactionalliance.org/circular-action-alliance-maryland (consulted 13 October 2026)
- Washington Department of Ecology, Recycling Reform Act (PR-US-008). https://ecology.wa.gov/waste-toxics/reducing-recycling-waste/our-recycling-programs/recycling-reform-act (consulted 13 October 2026)
- Washington State Legislature, Chapter 70A.208 RCW (PR-US-008). https://app.leg.wa.gov/RCW/default.aspx?cite=70A.208&full=true (consulted 13 October 2026)
- CalRecycle, SB 343 Accurate Recycling Labels (PR-US-011). https://calrecycle.ca.gov/wcs/recyclinglabels/ (consulted 13 October 2026)
- CalRecycle, SB 343 Frequently Asked Questions, August 2025 (PR-US-011). https://www2.calrecycle.ca.gov/Docs/Web/131148 (consulted 13 October 2026)
- Ministry for the Environment (New Zealand), Update on waste policies (PR-NZ-002). https://environment.govt.nz/news/update-on-waste-policies/ (consulted 13 October 2026)
- Reckitt, Sustainability Report 2025. https://eu-assets.contentstack.com/v3/assets/blt93c8bc7a598af9f0/blt8d0848c0b02e7e52/69cd46220c530c95012e3f8d/Reckitt_Sustainability_Report_2025.pdf (consulted 13 October 2026)
Ask the SPI team
What changes for your packaging next quarter?
Tell us your markets and materials. The SPI team walks you through the rules and buyer commitments that affect them.
Prefer email? Write to sales@strategicpackaginginsights.com.
- Q1
Which packaging rules apply to us in each market we sell in?
We map each market's EPR, tax, ban, recycled-content, labelling and deposit rules against your materials and formats, and show which are in force, adopted or only proposed.
- Q2
What could EPR fees and plastic taxes cost us next year?
We apply published fee tables and tax rates to your tonnages and recycled content, and show the result as scenarios with every rate sourced.
- Q3
Can you tell us when a rule changes?
Yes. The free tracker alerts cover rule changes by country; a monitoring retainer adds monthly notes on what the changes mean for your portfolio.