Skip to content
Specialized Packaging Market Intelligence and Strategic AdvisoryPackaging Intelligence. Clearer Decisions. Stronger Growth.
SPI Regulation Tracker

Packaging rule · Ireland · Deposit return

Ireland Deposit Return Scheme (Re-turn)

Deposit return rule covering plastic, metal in Ireland, set by Department of the Environment (Ireland). Applies since 1 February 2024.

By the SPI teamRule ID PR-IE-001Source consulted 14 October 2026Verified 14 October 2026
Sourced facts

The rule

Recorded from the official source named below. Rates and dates are as the source states them on the date it was consulted.

Jurisdiction
Ireland
Authority
Department of the Environment (Ireland)
Rule type
Deposit return
Materials
Plastic, Metal
Status
In force Enacted
Rate or target
0.15 EUR/containerEUR 0.15 for 150-500 ml; EUR 0.25 for 500 ml to 3 litres (per gov.ie). Legal basis S.I. No. 599/2021, which covers PET bottles and aluminium or steel containers up to 3 litres.
Adopted or published
17 November 2021
Applies from
1 February 2024
From the source

“From today, 1 February 2024”

Official source gov.ie: Ireland's Deposit Return Scheme is liveOfficial (government or regulator) · consulted 14 October 2026

Deadlines

Key dates

  1. Adopted or published 4 years and 11 months ago

  2. Applies from 2 years and 9 months ago

  3. Source consulted by the SPI team 1 month ago

  4. Re-checked by a second SPI team member 1 month ago

SPI analysis

What it means

SPI analysis Our reading of the official source above. Not legal advice; always rely on the official text.

SPI summary

Ireland's deposit return scheme for PET plastic drinks bottles and aluminium and steel cans started on 1 February 2024, with 15 cent on 150-500 ml containers and 25 cent on containers from 500 ml to 3 litres.

In practice

Ireland's deposit return scheme, run by Deposit Return Scheme Ireland CLG trading as Re-turn, started on 1 February 2024. Deposits are 15 cent on containers of 150 ml to 500 ml and 25 cent on containers of 500 ml to 3 litres, and only containers carrying the Re-turn logo carry a deposit. Producers join the approved body before placing products on the market, pay deposits and fees and label as prescribed; retailers charge and refund deposits and provide take-back.

Where the record is unclear

  • Deposit amounts sit in Schedule 1 of S.I. 599/2021, which did not render on the statute book page; amounts are taken from the gov.ie press release.
  • The press release sets bands of 150 to 500 ml and 500 ml to 3 litres without stating which band a 500 ml container falls in.
  • Whether the regulations have been amended since 2021, including for the PPWR, was not checked.

Where it sits in the tracker

  • One of 1 packaging rules we track in Ireland, of which 1 are deposit return rules.
  • In all, 7 deposit return rules are tracked across 6 jurisdictions. Compare them below

Company profiles that map to this rule

Companies whose SPI profile lists this rule in its regulatory exposure, based on where they report selling. Not company-reported.

SPI analysis

Overview

Ireland's scheme now rests on the Separate Collection (Deposit Return Scheme) Regulations 2024, S.I. No. 33 of 2024, made on 31 January 2024, the day before launch2. Regulation 25 revoked the 2021 Regulations (S.I. No. 599 of 2021) and carried over approvals granted under them, so the approval of Deposit Return Scheme Ireland CLG, trading as Re-turn, continued under the new text12. Both instruments were made under section 29(4)(f) of the Waste Management Act 19961.

The explanatory note to S.I. 33/2024 says the scheme gives further effect to Directive (EU) 2019/904 on single-use plastics and links the aluminium recycling targets to Directive (EU) 2018/8522. The government framed it as a Programme for Government 2020 commitment, noting that about 5 million drinks are consumed in single-use containers in Ireland each day5.

The design is producer-owned and not for profit. Regulation 4 requires producers to establish the scheme or appoint a body to run it, financed through registration and producer fees, unredeemed deposits and material revenue, with fees limited to covering operating costs12. S.I. No. 555 of 2024, made on 22 October 2024, then adjusted the distributor definition, the register of exempted retailers, enforcement powers and the deposit schedule3.

Duties

Who must do what

Producers (first to place in-scope drinks on the Irish market)

  • Join an approved body before placing in-scope products on the market (Regulation 13)2.
  • Charge and itemise the deposit, register, report and label products as the approved body prescribes (Regulation 13)2.
  • Register each product on the Re-turn portal with barcode, dimensions, weight and cap and label materials before sale, and report volumes monthly6.
  • Pay Re-turn the deposit and a per-unit producer fee that varies by material but not by container size6.

Distributors (wholesale)

  • Wholesalers selling in-scope products that are not the producer have parallel duties under Regulation 16 and register separately with Re-turn236.

Retailers

  • Charge and itemise the deposit, register and display the registration certificate (Regulation 14)2.
  • Take back containers and refund the deposit immediately, whoever sold the drink; containers that are damaged, not empty or lack deposit marking may be refused (Regulation 14(3)(b))2.
  • Exemptions under Regulation 17 cover drinks consumed on the premises, stores of 250 square metres or less, online sales and vending machines, subject to agreement with the approved body2.

Approved body (Re-turn)

  • Meet separate collection and recycling targets, audit members and supply data to the Minister, the EPA and local authorities (Regulation 5)2.
  • Keep a register of retailers exempted from take-back and issue them exemption certificates (Regulation 5(1)(e) and (l), as amended by S.I. 555/2024)3.
Scope

Are you in scope?

Work through each question. The answers are the SPI team's reading of the sources cited.

  1. Is the drink in a PET plastic bottle of 0.150 to 3 litres?

    If yes
    It is in scope under Regulation 3 of S.I. 33/2024.
    If no
    Plastic bottles of other polymers are excluded under Regulation 3(2).
  2. Is it in an aluminium or steel container of 0.150 to 3 litres designed to hold a beverage?

    If yes
    In scope; Re-turn accepts aluminium and steel cans.
    If no
    Metal containers not designed for drinks are excluded.
  3. Is the drink milk or another dairy-based product?

    If yes
    It is not a beverage for the scheme and carries no deposit.
    If no
    Apply the container tests.
  4. Are you the first to place the drink on the market in the State, including by import or online sale?

    If yes
    You are the producer and must join Re-turn before sale.
    If no
    You are a distributor or retailer, each with its own registration.
  5. Is the store 250 square metres or less?

    If yes
    It may qualify for the Regulation 17 take-back exemption by agreement with the approved body, but it still charges the deposit.
    If no
    Full take-back duties apply.
Checklist

Compliance checklist

  1. Register as producer and sign the membership agreement

    By Before first placing on the market

    SPI analysis of the official text. Not legal advice; confirm with the text or counsel. Regulation 13 makes membership a condition of placing in-scope drinks on the Irish market.

    Evidence to keep Re-turn membership agreement and producer number.

  2. Register and approve each container

    By Before sale of each SKU

    Submit barcode and container data, and seek new approval for significant changes in shape, size or weight.

    Evidence to keep Portal approval record per SKU.

  3. Apply the Re-turn logo and an ROI or registered barcode

    By Before sale

    Follow the Technical Specification and Labelling Manual; only PET bottles and aluminium or steel cans are accepted.

    Evidence to keep Artwork sign-off against the manual.

  4. Report volumes monthly

    By Monthly

    Report placed-on-market units by CSV or manual portal entry; Re-turn audits producer records.

    Evidence to keep Monthly returns reconciled to sales ledgers.

  5. Itemise the deposit on invoices and receipts

    By Ongoing

    Producers, distributors and retailers show the deposit as a separate line, as Regulations 13 and 14 require.

    Evidence to keep Sample invoices and till receipts.

  6. Track deposit changes

    By Each financial year

    Regulation 18(3) lets the Minister adjust the deposit once per financial year after consulting the approved body.

    Evidence to keep Note of the Schedule 1 amounts in force.

Enforcement

Enforcement and penalties

Who enforces
Local authorities, through authorised persons they appoint
Powers
Authorised persons use section 14 powers of the Waste Management Act 1996 to enforce Regulations 13, 14, 15 and 16, among others (Regulation 19(2), as replaced by S.I. 555/2024).
Enforcement so far
SPI knows of no prosecution under the deposit regulations as of 14 October 2026.

Penalties

BreachPenaltyLegal basis
Offence under Regulations 13 to 16, on summary convictionclass A fine (not greater than EUR 5,000) or up to 12 months imprisonment, or bothRegulations 20 and 21 of S.I. 33/2024; section 10(1)(a) Waste Management Act 19964
Offence under Regulations 13 to 16, on indictmentup to EUR 15,000,000 or up to 10 years imprisonment, or bothRegulations 20 and 21 of S.I. 33/2024; section 10(1)(b) Waste Management Act 19964
Continuing offence after conviction, per dayup to EUR 1,000 per day (summary) or EUR 130,000 per day (indictment)Section 10(3) Waste Management Act 19964

Breaching Regulations 13 to 16 is an offence, and directors and managers can be liable alongside a company where the offence involved their consent, connivance or neglect (Regulation 20)2. Penalties follow section 10 of the 1996 Act, with prosecution under sections 11 to 1324.

Connections

How it fits with other rules

Timeline

History of the rule

  1. S.I. No. 599 of 2021 made under section 29(4)(f) of the Waste Management Act 1996.

  2. The 2021 Regulations come into operation.

  3. Producers may place compliant, deposit-marked products on the market (Regulation 22 of S.I. 33/2024).

  4. S.I. No. 33 of 2024 made, revoking S.I. 599/2021.

  5. Scheme goes live with deposits of 15 cent and 25 cent.

  6. Last day producers may place non-compliant products on the market.

  7. Last day retailers may sell non-compliant stock.

  8. S.I. No. 555 of 2024 amends the distributor definition, exemption register, enforcement and deposit schedule.

  9. Today

  10. 90% separate collection target for plastic bottles.

Questions

Questions

Which containers carry a deposit in Ireland?

PET plastic bottles and aluminium or steel cans of 0.150 to 3 litres, under Regulation 3 of S.I. 33/2024. Only containers with the Re-turn logo carry the deposit, and milk and dairy drinks are excluded.

How much is the deposit?

Since 1 February 2024 the deposit is 15 cent for containers from 150 ml to 500 ml and 25 cent for containers from 500 ml to 3 litres, according to the government announcement. The Minister may change the amounts once per financial year under Regulation 18(3).

Is S.I. 599 of 2021 still the legal basis?

No. S.I. 33 of 2024, made on 31 January 2024, revoked the 2021 Regulations under its Regulation 25 and carried over the Re-turn approval. S.I. 555 of 2024 amended it on 22 October 2024.

What are the penalties?

Breaching Regulations 13 to 16 is an offence punished under section 10 of the Waste Management Act 1996. On indictment the maximum is a EUR 15 million fine or 10 years imprisonment, and on summary conviction a class A fine or 12 months.

Do small shops have to take back containers?

Stores of 250 square metres or less may be exempted from take-back under Regulation 17 by agreement with the approved body. Re-turn keeps a register of exempted retailers and issues certificates under the 2024 amendment.

Glossary

Definitions

beverage
A liquid intended for human consumption by drinking, other than milk and other dairy-based products (Regulation 2).1
producer
Any person who is first to place in-scope products on the market in the State (Regulation 2).1
return point
Premises registered to take back in-scope bottles and containers (Regulation 2, with duties in Regulation 15).1
distributor
A person, other than a producer, who sells or supplies in-scope products by wholesale (Regulation 2(1) of S.I. 33/2024, as substituted by S.I. 555/2024).3
Sources

Sources for this analysis

  1. Irish Statute Book: S.I. No. 599/2021, Separate Collection (Deposit Return Scheme) Regulations 2021 Official · Consulted 14 October 2026
  2. Irish Statute Book: S.I. No. 33/2024, Separate Collection (Deposit Return Scheme) Regulations 2024 Official · Consulted 14 October 2026
  3. Irish Statute Book: S.I. No. 555/2024, Separate Collection (Deposit Return Scheme) (Amendment) Regulations 2024 Official · Consulted 14 October 2026
  4. Law Reform Commission Revised Acts: Waste Management Act 1996, section 10 (revised) Official · Consulted 14 October 2026
  5. gov.ie: Ireland's Deposit Return Scheme is live Official · Consulted 14 October 2026
  6. Re-turn: Producer obligations Compliance scheme · Consulted 14 October 2026

Written by the SPI team on 14 October 2026. Sources checked as of 14 October 2026. SPI analysis, not legal advice; always rely on the official text.

Audit trail

Change history

Verified: a second SPI team member re-checked every fact above against the source on 14 October 2026. Any later change to the facts sends the rule back to Sourced and is logged here.

  1. Verified by a second SPI team member

  2. Changed: SPI summary, rate note

  3. Verified by a second SPI team member

  4. Added to the tracker

Spotted an error? Write to sales@strategicpackaginginsights.com quoting PR-IE-001 and the source. Corrections are logged in this history.

Other jurisdictions

Deposit return rules elsewhere

The same type of rule for the same materials in other jurisdictions, by the date it applies.

RuleWhereTypeMaterialsStatusApplies from
Austria deposit on single-use beverage containersPR-AT-001AustriaDeposit returnPlastic, MetalIn force1 January 2025
Poland deposit return systemPR-PL-001PolandDeposit returnPlastic, Metal, GlassIn force1 October 2025
Portugal deposit and refund system (Volta)PR-PT-001PortugalDeposit returnPlastic, MetalIn force10 April 2026
Scotland deposit return scheme start moved to October 2027PR-GB-005Scotland, United KingdomDeposit returnPlastic, MetalAdopted, not yet applying1 October 2027
Deposit return scheme for drinks containers (England and Northern Ireland)PR-GB-004England, Northern Ireland, United KingdomDeposit returnPlastic, MetalAdopted, not yet applying1 October 2027
PPWR: 90% separate collection of beverage containers (deposit systems)PR-EU-007European UnionDeposit returnPlastic, MetalAdopted, not yet applying1 January 2029

Every deposit return rule in the tracker

ClosingAsk the SPI team

Ask the SPI team

Does this rule apply to your packs?

Tell us your products, materials and markets. An analyst maps the obligations, fees and deadlines that apply, with every source.

Prefer email? Write to sales@strategicpackaginginsights.com.

Questions people bring
  1. Q1

    Which packaging rules apply to us in each market we sell in?

    We map each market's EPR, tax, ban, recycled-content, labelling and deposit rules against your materials and formats, and show which are in force, adopted or only proposed.

  2. Q2

    What could EPR fees and plastic taxes cost us next year?

    We apply published fee tables and tax rates to your tonnages and recycled content, and show the result as scenarios with every rate sourced.

  3. Q3

    Can you tell us when a rule changes?

    Yes. The free tracker alerts cover rule changes by country; a monitoring retainer adds monthly notes on what the changes mean for your portfolio.