SPI LedgerNews analysis
PPWR deposit return system: Article 50 sets a 90% test for 2029 and a narrow 80% exit
Under Article 50 of the PPWR, Regulation (EU) 2025/40, every Member State must separately collect at least 90% by weight of single-use plastic drinks bottles and metal drinks containers up to 3 litres by 1 January 2029, through a deposit return system charged at the point of sale; the only exit is for a state that collected 80% or more of that packaging in 2026 and files an exemption request with an implementation plan by 1 January 2028.
90% by 1 Jan 2029
Collection target
Plastic bottles and metal drinks containers up to 3 litres, by weight
Article 50(1)
80% in 2026
Exemption bar
Plus request and implementation plan by 1 Jan 2028
Article 50(5)
6 of 27
Member States above 90% in 2022
Estonia, Poland, Finland, Germany, Denmark, Sweden
COM(2026) 160
Source: Regulation (EU) 2025/40, Article 50, as quoted in Commission Notice C/2026/3084, section 28; COM(2026) 160, Annex 3 (SPI summary), checked 22 Nov 2026.
The 2022 count covers single-use plastic beverage bottles only, as reported under Directive (EU) 2019/904. Metal containers are not in that dataset.
The PPWR deposit return system rule has applied since 12 August 2026, but its real test sits in data that Member States are generating this year. This SPI Ledger reads Article 50 and Annex X paragraph by paragraph, sets the 80% exemption bar against the latest official collection rates for all 27 Member States, and sorts them into four positions for 2029.
Executive summary
Article 50 of Regulation (EU) 2025/40 turns drinks container collection into a result every Member State must deliver, and it fixes the tool. By 1 January 2029 each state must separately collect at least 90% by weight per year of single-use plastic beverage bottles and single-use metal beverage containers of up to 3 litres (Article 50(1)), and it must have a deposit and return system that charges a deposit at the point of sale (Article 50(2)). The Commission’s guidance of 10 June 2026 quotes both paragraphs and calls the exemption performance based, not geographic, and to be read restrictively (Commission Notice C/2026/3084, section 28).
The exit is narrow and dated. Under Article 50(5), a Member State escapes the deposit duty only if its separate collection rate for packaging first placed on its market in 2026 is 80% or more by weight, and it sends the Commission an exemption request with an implementation plan by 1 January 2028. The Commission then has three months to ask for a revised plan, and an exemption lapses if the rate stays under 90% for three consecutive calendar years (Article 50(6) and (7), read in unofficial consolidated texts).
The latest official numbers show how few states can use that exit. In 2022, the first year reported under the Single-Use Plastics Directive, the EU separately collected 71% of single-use plastic drinks bottles; six states were already above 90% and 18 were below 80% (COM(2026) 160, Annex 3). SPI analysis: of the states that the Commission’s annex lists without a deposit system, only Belgium, at 78.21%, was within 2 points of the 80% bar, and Czechia, at 74.20%, is listed as setting up a system in 2026. Eight states, among them France, Italy and Spain, face a build decision.
The four schemes SPI tracks closely show the other side of the test. Austria collected 81.5% in its first year (BMLUK), Ireland’s Re-turn reports a 76.4% return rate for 2025, Poland started on 1 October 2025 and Portugal on 10 April 2026. None has yet shown 90%, and that matters for Annex X: a scheme set up before 11 February 2025 escapes its minimum design rules only by reaching 90% by 1 January 2029.
For brand owners, fillers and retailers the practical point is that 2027 is the planning year. Exemption filings, due by 1 January 2028, will show which of roughly ten markets build new schemes for 2029, and Annex X will push existing schemes toward one operator, a set minimum deposit and retailer take-back. This piece maps those rules; it is not legal advice.
Key findings
- Article 50(1) requires 90% separate collection by weight of single-use plastic drinks bottles and metal drinks containers up to 3 litres by 1 January 2029, and Article 50(2) requires a deposit charged at the point of sale (Commission Notice C/2026/3084, section 28).
- The Article 50(5) exemption needs two things: 80% or more collected for packaging first placed on the market in 2026, and a request with an implementation plan sent by 1 January 2028; the Commission reads deposit charging and the system as cumulative, so no retailer is exempt unless the whole state is (Commission Notice C/2026/3084, section 28).
- In 2022 the EU separately collected 71% of single-use plastic drinks bottles, about 1.8 million of 2.54 million tonnes placed on the market; 6 Member States were above 90% and 18 below 80% (COM(2026) 160).
- SPI calculation: at 2022 tonnage, the EU would need about 0.49 million more tonnes of plastic bottles collected each year to reach 90%, and about 0.23 million more to reach 80%.
- Article 50(4) takes wine and aromatised wine products, other fermented drinks under CN code 2206 00, spirit drinks under CN heading 2208, and milk and milk products out of the deposit duty, wider than the three groups named in recital 144 (APA, May 2026; unofficial consolidated text).
- Annex X sets 15 minimum requirements, from a single or coordinated operator and a minimum deposit level to retailer take-back and clear marking; they apply from 1 January 2029, with older schemes spared only if they reach 90% by then and otherwise bound by 1 January 2035 (Commission Notice C/2026/3084, section 29).
- SPI analysis: on the Commission’s 2022 data and status table, 5 Member States already run a scheme above 90%, 10 run one that has not yet shown 90%, 2 are near the exemption bar, 8 face a build decision and 2 need their current status confirmed (Exhibit 6).
What Article 50 requires, paragraph by paragraph
Article 50 sits in Chapter VI of the PPWR, on packaging waste management, and has applied since 12 August 2026 (SPI rule note PR-EU-001). It has twelve paragraphs. The Commission’s guidance quotes paragraphs (1), (2), (5) and (11) and point (l) of Annex X, and SPI read the rest in two unofficial German consolidated texts, because the EUR-Lex HTML of the regulation stops after the recitals. Exhibit 2 sets out what each paragraph does and who carries it.
| Paragraph | What it says | Who carries it | Text read |
|---|---|---|---|
| 50(1) | 90% separate collection by weight per year of single-use plastic bottles and metal drinks containers up to 3 litres, by 1 January 2029 | Member States | Commission Notice |
| 50(2) | Deposit and return systems for those formats, with a deposit charged at the point of sale | Member States, then retailers | Commission Notice |
| 50(3) | Option to free hospitality outlets from charging a deposit where the drink is opened, consumed and returned on the premises | Member States | Unofficial text |
| 50(4) | Deposit duty does not apply to wine products, other fermented drinks (CN 2206 00), spirits (CN 2208) and milk products; containers under 0.1 litres may be excluded if participation is technically impossible | Member States | Unofficial text; APA |
| 50(5) | Exemption from 50(2) for a state at 80% or more in 2026 that files a request and plan by 1 January 2028 | Member States | Commission Notice |
| 50(6) | Commission may ask for a revised plan within three months; the state replies within three months | Commission, Member States | Unofficial text |
| 50(7) | Exemption ends if the rate stays below 90% for three consecutive calendar years; a system is then due by 1 January of the second calendar year after the Commission's notice | Commission, Member States | Unofficial text |
| 50(8) | States endeavour to set up deposits for single-use glass bottles and drinks cartons, and to open single-use systems to reusable packaging | Member States | Unofficial text |
| 50(9) | States may go further, for example by adding the 50(4) products or other materials | Member States | Unofficial text |
| 50(10) | Returning reusable packaging must be as easy as returning single-use deposit packaging | Member States | Unofficial text |
| 50(11) | Annex X minimums apply by 1 January 2029; older schemes are spared only at 90%, otherwise bound by 1 January 2035; Commission review by 1 January 2038 | Member States, Commission | Commission Notice; unofficial text |
| 50(12) | Annex X minimums do not apply in the EU's outermost regions | Member States | Unofficial text |
Source: Commission Notice C/2026/3084, sections 28 to 30; lxgesetze.de and gesetze.legal, Article 50, unofficial German texts; Regulation (EU) 2025/40, recitals 141 to 146 (SPI summary), checked 22 Nov 2026.
SPI summary, not legal advice. Paragraphs marked 'unofficial text' were read in German consolidated texts and not yet matched against the English Official Journal text.
Three features stand out. First, the target is by weight and per year, and paragraph 1 lets a state calculate it on the weight of packaging waste generated rather than packaging placed on the market, under the reporting rules of Article 56 (unofficial text). The Commission’s timeline lists the Article 56(7) reporting implementing act as due by 12 February 2027 (Commission Green Forum, consulted 5 November 2026).
Second, the target and the tool are separate duties. Article 9 of Directive (EU) 2019/904 already set 77% separate collection of plastic bottles by 2025 and 90% by 2029, with deposit refund schemes as one option (SPI rule note PR-EU-007). Article 50 keeps the 90% figure, adds metal containers and makes the deposit the default.
Third, the Commission reads the duty to charge a deposit and the duty to run a system as one package. Its guidance says the regulation gives no softer terms to retailers in border regions, and that a retailer can only be exempted from charging a deposit if the whole Member State is exempted from setting up a system (Commission Notice C/2026/3084, section 28). The recitals add the reverse case: states with high cross-border activity should let packaging from a neighbour’s system be collected at designated points (recital 146).
The exemption route: how the 80% test works
The exemption is the only part of Article 50 that a Member State can decide for itself, and its conditions are cumulative. Exhibit 3 lays them out as a sequence, from the 2026 reference year to the point at which an exemption can lapse.
| Gate | Condition | Deadline | What happens if it is missed |
|---|---|---|---|
| 1. 2026 rate | Separate collection of 80% or more by weight of the packaging first placed on the national market in 2026 | Calendar year 2026 | No exemption; deposit system due by 1 January 2029 |
| 2. Evidence | The reported rate, or, if none has been reported yet, a reasoned statement on audited national data | With the request | Request cannot meet the 50(5) conditions |
| 3. Request and plan | Exemption request plus an implementation plan with a strategy, concrete measures and a timeline to reach 90% | 1 January 2028 | No exemption |
| 4. Commission review | Commission may ask for a revised plan within three months; the state has three months to resubmit | About 1 April 2028 and 1 July 2028 for a plan filed on 1 January 2028 | SPI has not yet confirmed what follows a plan that is still judged inadequate |
| 5. Staying above 90% | The exemption ends if the rate stays below 90% for three consecutive calendar years | From 2029 onward | Deposit system due by 1 January of the second calendar year after the Commission's notice |
Source: Commission Notice C/2026/3084, section 28 (Article 50(5)); lxgesetze.de and gesetze.legal, Article 50(5) to (7), unofficial German texts (SPI summary), checked 22 Nov 2026.
SPI reading of the text, not legal advice. Gate 2 paraphrases the unofficial text, which asks for a reasoned statement based on audited national data when no rate has yet been reported.
Four readings follow from the text, each marked as SPI analysis.
SPI analysis: the evidence will arrive before the data. The request is due on 1 January 2028, only twelve months after the 2026 reference year closes. The reporting act that fixes how rates are calculated is due by 12 February 2027 on the Commission’s timeline. That is why the unofficial text provides for a reasoned statement on audited national data when no rate has yet been reported: in practice most requests will rest on national figures that the Commission has not yet received through the normal reporting cycle.
SPI analysis: the bar is 80% now and 90% later. The 80% figure only opens the door. The plan must show how the state reaches 90%, and paragraph 7 withdraws the exemption after three straight years below 90%. A state at 80% in 2026 is therefore betting that a non-deposit route can add another 10 points and hold them.
SPI analysis: the test reads by format. The unofficial text refers to the separate collection of the respective packaging, which SPI reads as a test for plastic bottles and for metal containers taken one by one. SPI has not yet confirmed whether a state could hold an exemption for one format and not the other; the Commission’s guidance does not address it in the sections SPI read.
SPI analysis: the 2029 date can slip only by a known amount. If an exempted state stays under 90% in 2029, 2030 and 2031, the deposit system is due by 1 January of the second calendar year after the Commission’s notice. The earliest realistic deposit date in that case is 2034, as Exhibit 10 shows.
Portugal’s regulator spelt out the cost of the bar for a new scheme. Its FAQ notes that the exemption would have needed 80% in 2026 and a plan by 1 January 2028, a bar too high for a system whose licence targets 40% in its first year (SPI rule note PR-PT-001, citing APA FAQ v2.6). Portugal built a scheme instead.
Scope: which drinks are in, which are out and what states can add
Article 50 covers two formats: single-use plastic beverage bottles and single-use metal beverage containers, each up to 3 litres. The rest of the scope comes from paragraphs (3), (4), (8) and (9), which Exhibit 4 sets side by side with the recitals.
| Item | Status under Article 50 | Where it is set |
|---|---|---|
| Single-use plastic drinks bottles up to 3 litres | Mandatory: 90% target and deposit | 50(1)(a), 50(2) |
| Single-use metal drinks containers up to 3 litres | Mandatory: 90% target and deposit | 50(1)(b), 50(2) |
| Wine products and aromatised wine products | Out of the deposit duty; states may add them | 50(4)(a), 50(9), recital 144 |
| Other fermented drinks, CN 2206 00 (for example cider) | Out of the deposit duty; states may add them | 50(4)(b), 50(9) |
| Spirit drinks, CN 2208 | Out of the deposit duty; states may add them | 50(4)(c), 50(9), recital 144 |
| Milk and milk products | Out of the deposit duty; states may add them | 50(4)(d), 50(9), recital 144 |
| Containers under 0.1 litres | May be excluded only where participation is technically impossible | 50(4), second subparagraph |
| Single-use glass bottles and drinks cartons | Not mandatory; states endeavour to include them | 50(8), recital 142 |
| Reusable packaging | States endeavour to open single-use systems to it where feasible | 50(8), 50(10), recital 142 |
| Drinks opened and consumed in hospitality | States may free outlets from charging, under three conditions | 50(3), recital 142 |
Source: Regulation (EU) 2025/40, recitals 142 and 144; APA, Enquadramento comparado do SDR (May 2026); lxgesetze.de and gesetze.legal, Article 50(3), (4), (8) and (9), unofficial German texts (SPI summary), checked 22 Nov 2026.
SPI summary, not legal advice. CN codes as given in the APA document and the unofficial text.
The article’s list of exclusions is wider than the recital’s. Recital 144 names wine, aromatised wine products, spirit drinks and milk and milk products, and SPI’s rule note PR-EU-007 follows that list. Article 50(4), as summarised by Portugal’s environment agency, also lists other fermented beverages under CN code 2206 00 (APA, May 2026). For cider and perry makers that difference decides whether a bottle must join a scheme.
National law can move the other way. Portugal’s APA explains that Article 50 widened Volta’s scope from 12 August 2026 to service packaging and plant-based drinks, took spirits, wine-sector products and dairy out, and narrowed technical exclusions to packaging under 0.1 litres (SPI rule note PR-PT-001). Austria’s ordinance excludes milk and dairy products, and Poland exempts milk and drinkable dairy producers from its collection obligation; how dairy drinks split across schemes is set out in SPI’s Ledger on Danone packaging and deposit return.
Two options in the article change how the deposit reaches the customer. Under Article 50(3), a state may free hospitality outlets from charging a deposit, but only where the deposit packaging is opened on the premises, the drink is consumed there and the empty container is returned there (unofficial text). Recital 142 runs the other way, allowing a state to charge a deposit on drinks consumed on the premises or to require every retailer to accept deposit packaging whatever its material, format or sales area. SPI analysis: the hospitality option matters most in markets where bars and restaurants buy in single-use cans and plastic bottles from wholesalers; whether they pay and reclaim deposits, or sit outside the cash flow, is a national choice that each new scheme law will have to make before 2029.
Annex X: the minimum design of a PPWR deposit return system
Annex X turns “a deposit system” into a defined design. Its lead-in obliges Member States to make sure every deposit system in their territory meets the minimums, and Article 50(11) sets 1 January 2029 as the date (Commission Notice C/2026/3084, section 29). Exhibit 5 groups the 15 lettered points by the party they bind.
| Group | Point | Minimum requirement |
|---|---|---|
| Operator | (a) | A single system operator is appointed or licensed; with more than one, the state coordinates them |
| Operator | (b) | Governance and rules give every producer of covered packaging equal access on fair terms |
| Operator | (f) | The operator is a non-profit, independent legal entity |
| Operator | (g) | The operator performs only tasks arising from the regulation and the national system |
| Operator | (h) | The operator coordinates the functions of the system |
| Operator | (i) | The operator keeps written statutes, proof of financing and a declaration of conformity |
| Operator | (j) | A sufficient share of annual turnover funds public awareness campaigns |
| Operator | (k) | Operators give competent authorities all information needed to check compliance |
| Money and data | (c) | Control and reporting systems give the operator data on collection |
| Money and data | (d) | A minimum deposit level is set, high enough to reach the collection rates |
| Money and data | (e) | Minimum financial capacity requirements apply to the operator |
| Money and data | (o) | Fees are transparent |
| Shop and shopper | (l) | Final distributors accept deposit packaging of the materials and formats they sell and refund the deposit, unless equally accessible authorised return points exist |
| Shop and shopper | (m) | End users can return deposit packaging without buying anything and get the deposit back |
| Shop and shopper | (n) | All deposit packaging is clearly marked for return |
Source: gesetze.legal, Anhang X VO (EU) 2025/40, unofficial German text; Commission Notice C/2026/3084, section 30 (point (l)) (SPI summary), checked 22 Nov 2026.
SPI grouping and paraphrase, not legal advice. Only point (l) was read in the Commission's guidance; the other points were read in the unofficial text and are not yet matched against the Official Journal.
The Commission has read two of these rules. On point (l), its guidance quotes the duty on final distributors to accept deposit-bearing packaging of the materials and formats they distribute (section 30). On older schemes, it says that a review of an existing system means any legislative action that substantially changes it, that a system at 90% or more need not meet Annex X, and that a state whose system falls short should consider aligning it (section 29).
SPI analysis
Annex X is where Article 50 reaches business models, not only collection rates. Point (a) favours one operator, which bears on Poland’s multi-operator model; Ledger 39 lists eight operator permits granted between March 2024 and April 2026 (Poland’s packaging EPR and deposit system). Point (d) asks states to set a minimum deposit, which today ranges from EUR 0.10 in Portugal to EUR 0.25 in Austria among the euro schemes SPI tracks. Point (f) asks for a non-profit operator; Ireland’s Re-turn is run not for profit by producers and Austria’s operator is a gGmbH, a non-profit company form (SPI jurisdiction notes IE and AT).
A framework: four positions for 2029
The useful question for a drinks business is not whether Article 50 applies, because it applies everywhere, but where each market stands against it. SPI sorts the 27 Member States into four positions, using two inputs: the 2022 separate collection rate for plastic bottles, and whether a deposit system exists according to the Commission’s annex or SPI’s tracker.
| Position | Test | Member States (2022 rate) | What 2029 means |
|---|---|---|---|
| A. Already there | Deposit system in place and 90% or more in 2022 | Germany (97.11), Finland (98.83), Denmark (91.94), Sweden (90.33), Estonia (100.66) | Hold the rate; Annex X spared while at 90% |
| B. Climbing | Deposit system in place or started, latest rate below 90% | Lithuania (86.94), Croatia (86.62), Slovakia (78.98), Netherlands (67.73), Latvia (56.84), Hungary (19.17), Austria (75.98), Ireland (48.66), Portugal (43.12), Poland (100.00, before its scheme) | Reach 90% by 2029 or align with Annex X |
| C. Near the bar | No deposit system in the annex, 2022 rate within 6 points of 80% | Belgium (78.21), Czechia (74.20, system listed for 2026) | Decide by 1 January 2028: exemption request or build |
| D. Build decision | No deposit system in the annex, 2022 rate more than 12 points below 80% | Italy (67.03), Luxembourg (61.63), France (53.28), Cyprus (45.62, being set up), Spain (39.52), Greece (38.68, planned), Bulgaria (38.21), Slovenia (no data) | Deposit system due by 1 January 2029 unless 2026 shows 80% |
| Status to confirm | Annex lists no running system | Romania (60.07), Malta (24.96, planned) | SPI has not yet confirmed current status |
Source: SPI analysis of COM(2026) 160 final, Annex 3 (2022 rates and deposit status column); SPI tracker rules PR-AT-001, PR-IE-001, PR-PL-001, PR-PT-001 and jurisdiction note DE (SPI summary), checked 22 Nov 2026.
SPI framework, not legal advice. Deposit status for states outside SPI's tracker is as given in the Commission's Annex 3, which cites EEA country profiles of 2024 and 2025; some entries predate later launches. Romania and Malta are listed separately because SPI has not yet confirmed their current status against an official act.
Position A, already there. Five states with long-running deposits reported more than 90% in 2022. For them Article 50 changes little, except that Annex X applies if a rate ever falls below 90% in 2029. Germany’s deposit has run since 2003 and was kept when the VerpackDG replaced the packaging act on 12 August 2026 (SPI jurisdiction note DE).
Position B, climbing. Ten states run or have started a scheme but have not yet shown 90%. Several numbers in this group predate their schemes: Ireland’s 48.66% and Portugal’s 43.12% are 2022 figures, before Re-turn started on 1 February 2024 and Volta on 10 April 2026. Poland reported 100.00% for 2022, three years before its deposit began on 1 October 2025, a figure the Commission’s warning on national methods covers. The Netherlands, at 67.73% despite a running scheme, is the reminder that a deposit alone does not guarantee 90%.
Position C, near the bar. Belgium, at 78.21%, needed 1.79 points to reach 80% on its 2022 base, by SPI’s calculation. It is the one state that the annex lists without a deposit system and that could plausibly clear the 2026 test without one. Czechia, at 74.20%, is listed in the annex as setting up a system in 2026, which would move it into position B.
Position D, build decision. Eight states start more than 12 points below the bar. For them the exemption is a theoretical route; the practical choice is how fast to legislate and license an operator. Spain’s Law 7/2022 already contains its own trigger: if the 2023 or 2027 bottle targets are missed, a nationwide deposit system is due within two years (MITECO, November 2024). SPI has not yet tied a formal Spanish decision activating that deposit to an official act. France has no beverage deposit in SPI’s tracker and is listed in the annex as under discussion.
The gap to 80%: an SPI calculation
Exhibit 7 measures how far each state that the annex lists without a running scheme stood from the 80% exemption bar in 2022. It is the size of the climb a non-deposit route would have needed between 2022 and 2026.
The same data gives the EU picture. In 2022 the Member States placed about 2.54 million tonnes of single-use plastic drinks bottles on the market and separately collected about 1.8 million tonnes (COM(2026) 160). By SPI’s calculation, 90% of 2.54 million tonnes is 2.29 million tonnes, so the EU would need about 0.49 million more tonnes collected each year at 2022 volumes; the gap to 80% is about 0.23 million tonnes. Those figures cover plastic bottles only, because the 2022 reporting under the Single-Use Plastics Directive does not include metal cans.
The Commission’s report links the gap to deposits directly: 10 of the 12 countries that already reached the 77% target for 2025 in 2022 have deposit refund schemes in place (COM(2026) 160, page 11). Its own caution applies to every number above: it says comparisons across countries may not be especially meaningful, because methods and collection systems differ.
The tracked schemes: Austria, Ireland, Poland and Portugal against the 2029 test
SPI’s tracker holds four deposit schemes that started between 2024 and 2026. Their fees, deposits and shop rules are covered in Ledger 09 (deposit return across Europe and the UK) and in the country pieces; Exhibit 8 looks only at what Article 50 and Annex X ask of them.
| Scheme | Started | Euro deposit | Latest result | National path to 90% | Set up before 11 Feb 2025? |
|---|---|---|---|---|---|
| Austria, Recycling Pfand Österreich | 1 Jan 2025 | EUR 0.25 | 81.5% in 2025, target 80% | 90% from 2027 | Yes, ordinance of 2023 and start in January 2025 |
| Ireland, Re-turn | 1 Feb 2024 | EUR 0.15 and EUR 0.25 | 76.4% return rate in 2025, by units | 90% in 2029 | Yes |
| Poland, eight licensed operators | 1 Oct 2025 | Set in złoty | About 5 billion containers returned, Oct 2025 to Sep 2026 | 77% to 2028, 90% from 2029 | Open: law of 2023, start in October 2025 |
| Portugal, SDR Portugal (Volta) | 10 Apr 2026 | EUR 0.10 | No full-year rate yet; licence target 40% in 2026 | 80% in 2027, 85% in 2028, 90% from 2029 | Open: law of 2018, start in April 2026 |
Source: BMLUK, Ein Jahr Einwegpfand; BGBl. II Nr. 283/2023; Re-turn 2025 Annual Report; S.I. No. 33/2024; Dz.U. 2024 poz. 1911; gov.pl; APA FAQ v2.6; Government of Portugal release of 13 April 2026; SPI rule notes PR-AT-001, PR-IE-001, PR-PL-001, PR-PT-001 (SPI summary), checked 22 Nov 2026.
SPI summary, not legal advice. Latest results use each source's own basis: Austria by weight, Ireland by units. Poland's deposit is set in złoty and is not shown here; see Ledger 39. 'Set up before 11 Feb 2025' is an open question for Poland and Portugal, whose laws predate that date but whose systems started later.
In practice: Austria.
BMLUK reports that 81.5% of single-use deposit containers placed on the market in 2025 were collected separately, above the first-year milestone of 80%, with about two billion bottles and cans placed and more than 6,400 return machines handling 98% of returns. The ordinance’s section 16 asks for 90% by weight from 2027, separately for plastic and metal (SPI rule note PR-AT-001). That puts Austria’s national test two years ahead of Article 50. What the scheme charges producers is worked through in Austria’s ARA fees and the deposit scheme.
In practice: Ireland.
Re-turn’s 2025 Annual Report records 1,434,857,656 containers returned, 749,128,937 cans and 685,728,719 plastic bottles, and an overall return rate of 76.4%, up from 66% in 2024, against a 77% target for 2025. The rate is by units, while Article 50 measures by weight. SPI analysis: Ireland needs about 14 points in four years; if it reaches 90% by 1 January 2029, its scheme, set up before the PPWR took effect, is spared Annex X.
In practice: Poland.
Poland’s deposit started on 1 October 2025, and the Act of 21 November 2024 fixed the collection level at 77% for each year from 2025 to 2028 and 90% from 2029, for plastic bottles, cans and reusable glass alike (Dz.U. 2024 poz. 1911, as read in SPI’s Ledger 39). The ministry reports about 5 billion deposit containers returned on operator data for October 2025 to September 2026 (gov.pl). Producers of reusable glass may stay outside the operators’ systems until 31 December 2028 (SPI rule note PR-PL-001). SPI analysis: Poland is the only tracked scheme with several licensed operators, so Annex X point (a), one operator or state coordination of several, is the point most likely to bite if it misses 90% in 2029. The flat 77% path also leaves the full 13 point climb to the final year of the national schedule.
In practice: Portugal.
Volta began on 10 April 2026, run by SDR Portugal, the only licensed managing entity so far, with a EUR 0.10 deposit (Government of Portugal; SPI rule note PR-PT-001). Its licence path of 40%, 80%, 85% and 90% from 2029 lines up with Article 50. The regulator’s May 2026 note calls the deposit the European regulatory standard for the covered formats from 2029, save for a derogation. The Portuguese case, and its two fee systems, is covered in SPI’s Ledger piece on Portugal’s packaging fees and the Volta deposit.
SPI analysis: the “set up before” question. Annex X spares a system established before the regulation entered into force on 11 February 2025, if it reaches 90% by 1 January 2029. Ireland and Austria were running by then. Poland’s deposit was enacted in 2023 and licensed operators from March 2024 but started collecting in October 2025; Portugal’s law dates from 2018 and its operator was licensed on 1 June 2024, but collection began in April 2026. SPI has not yet confirmed how the Commission reads “established” for such cases, and its guidance sections read for this piece do not settle it.
Scenarios: the tonnes a build-decision state is missing
Spain is the largest market in position D with official tonnage SPI can use. MITECO’s report on 2023 data counts 214,039.33 tonnes of single-use plastic drinks bottles placed on the Spanish market. Exhibit 9 holds that tonnage constant and shows the tonnes a non-deposit route would have had to collect in 2026 to qualify, under three assumed 2026 rates.
| Scenario | Assumed 2026 rate | Tonnes collected | Tonnes needed for 80% | Shortfall to 80% | Shortfall to 90% |
|---|---|---|---|---|---|
| Low | 40% | 85,616 | 171,231 | 85,616 | 107,020 |
| Base | 50% | 107,020 | 171,231 | 64,212 | 85,616 |
| High | 60% | 128,424 | 171,231 | 42,808 | 64,212 |
Source: SPI calculation from MITECO, Informe recogida separada botellas SUP, año 2023 (November 2024), Table 1 (SPI summary), checked 22 Nov 2026.
Assumes the 2023 tonnage placed on the market (214,039.33 t) holds in 2026. The three 2026 rates are assumptions, not forecasts; SPI has not yet confirmed Spain's final 2023 rate. Plastic bottles only; metal cans are tested separately. Tonnes, rounded to whole tonnes.
SPI analysis
Even in the high case, a 60% rate leaves Spain about 42,808 tonnes short of the bar, roughly a fifth of the market. The MITECO excerpt read for this piece did not include its final 2023 rate; at 2022, the Commission’s annex gives 39.52%. On either base the 2026 test is not a route Spain can rely on, which is why its own Law 7/2022 trigger matters more.
The second scenario set looks at the exit from an exemption. A state that obtains one and then misses 90% for three straight years loses it, with a system due by 1 January of the second calendar year after the Commission’s notice.
| Scenario | Years below 90% | Commission notice | Deposit system due |
|---|---|---|---|
| Fast | 2029, 2030, 2031 | 2032 | 1 January 2034 |
| Base | 2029, 2030, 2031 | 2033 | 1 January 2035 |
| Slow | 2029, 2030, 2031 | 2034 | 1 January 2036 |
Source: SPI calculation from lxgesetze.de and gesetze.legal, Article 50(7), unofficial German texts (SPI summary), checked 22 Nov 2026.
Assumes the rate is below 90% in 2029, 2030 and 2031. The notice year depends on when 2031 data reach the Commission, which SPI has not yet confirmed under the Article 56 reporting act. Not legal advice.
SPI analysis
An exemption buys five to seven years at most against a 2029 build, and only if the plan holds the rate near 90%. For a drinks business with plants serving several markets, the planning case in an exempted state is still a deposit system, later.
Industry reaction
“Deposit and return systems should be obligatory for single-use plastic beverage bottles and metal beverage containers.”
European Parliament and Council of the EU, co-legislators, Regulation (EU) 2025/40, recital 142, 19 December 2024
“Those requirements will help deliver greater consistency and higher return rates across Member States.”
European Parliament and Council of the EU, co-legislators, on the Annex X minimum requirements, Regulation (EU) 2025/40, recital 145, 19 December 2024
“Many countries are already setting up these types of schemes or planning to do so soon (see Annex 3 for more details).”
European Commission, Report on Member States’ reporting on single-use plastic items and fishing gear, COM(2026) 160 final, 16 April 2026
“Até essa data, o SDR torna-se o padrão regulatório europeu para os formatos abrangidos, salvo derrogação.”
In English: by that date, the deposit system becomes the European regulatory standard for the covered formats, save for a derogation.
The Commission’s sentence follows its finding that deposit schemes are effective and that Member States will have to introduce them under the new packaging regulation. The Portuguese regulator’s note was written for packers moving from the yellow-bin system to Volta, and treats 1 January 2029 as the date by which deposits become the norm.
What leaders should do now
- Commercial and supply chain leads, by Q1 2027: list every single-use plastic bottle and metal drinks container up to 3 litres by Member State, and flag wine, cider, spirits and dairy lines that Article 50(4) takes out of the deposit duty, since national schemes may still add them.
- Public affairs teams, through 2027: follow the 2026 collection figures and the exemption debate in Belgium, Czechia, Italy, France and Spain, the markets where the 1 January 2028 deadline decides whether a scheme arrives for 2029.
- Packaging and artwork leads, from the label act onward: budget a deposit mark and barcode cycle for each new scheme market, and watch the Article 12(6) implementing act on harmonised deposit labels, listed as due by 12 August 2026 and still being prepared on the Commission’s page.
- Finance teams, by mid 2027: model deposit cash flow and producer fees, in euro, for each likely new scheme market, using the existing schemes in Austria, Ireland and Portugal as reference points rather than a single EU figure.
- Retail operations leads, by 1 January 2029: plan take-back space, machines and refund handling for every store format in a deposit market, because Annex X point (l) obliges final distributors to accept the formats they sell unless equally accessible return points exist.
- Producers in Poland and Ireland, by 2028: ask your operator how it will show 90% by 1 January 2029, and what Annex X alignment would change in operator structure, deposit level or fees if it does not; check the answer with counsel.
Questions for your board
- Which of our markets are in position C or D, and what share of our bottle and can volume do they carry?
- If France, Italy or Spain start a scheme on 1 January 2029, is our labelling, barcode and logistics plan ready twelve months before?
- Do we know, for each existing scheme we pay into, whether it was set up before 11 February 2025 and whether it is on track for 90%?
- Are our cider, wine, spirits and dairy lines in or out of each national scheme, and who tracks changes under Article 50(9)?
- How would an Annex X move to a single, non-profit operator change our fees or governance seat in Poland?
- What is our position if a state obtains an exemption and then loses it in the 2030s?
What to watch
- 1 Jan 2027: Austria’s deposit target rises to 90% by weight; Portugal’s licence target rises to 80% for 2027.
- 12 Feb 2027: Article 56(7) reporting implementing act due on the Commission’s timeline; it frames how collection rates are reported.
- 1 Jan 2028: deadline for any Article 50(5) exemption request and implementation plan.
- 1 Apr 2028: for a plan filed on 1 January 2028, end of the three-month window in which the Commission may ask for a revision, by SPI’s calculation.
- 31 Dec 2028: end of Poland’s voluntary period for reusable glass systems (PR-PL-001).
- 1 Jan 2029: 90% separate collection and Annex X minimums apply; deposit systems due in every non-exempt state.
- 1 Jan 2035: latest date for older schemes below 90% in 2029 to meet Annex X.
- 1 Jan 2038: Commission assessment of Article 50 implementation and interoperability.
- past
- next
- SUP Directive sets 77% for 2025 and 90% for 2029past
- Ireland's Re-turn startspast
- Austria's deposit startspast
- PPWR enters into forcepast
- Poland's deposit startspast
- PPWR and Article 50 applypast
- Austria at 90%; Portugal at 80%next
- Article 56(7) reporting act duenext
- Exemption requests and plans duenext
- Commission revision window endsnext
- 90% target and Annex X applynext
- Earliest deposit date after a lost exemptionnext
- Annex X for older schemes below 90%next
- Commission assessment of Article 50next
Source: Directive (EU) 2019/904; Regulation (EU) 2025/40; Commission Notice C/2026/3084; COM(2026) 160; BGBl. II Nr. 283/2023; Dz.U. 2024 poz. 1911; APA FAQ v2.6; Commission Green Forum; unofficial texts of Article 50 (SPI summary), checked 22 Nov 2026.
Past means before 5 November 2026. Dates as given in each source.
Show the data
| Date | Label | Category | Link |
|---|---|---|---|
| 2019-06-12 | SUP Directive sets 77% for 2025 and 90% for 2029 | past | https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=CELEX:32019L0904 |
| 2024-02-01 | Ireland's Re-turn starts | past | https://media.re-turn.ie/wp-content/uploads/2025-Annual-Report.pdf |
| 2025-01-01 | Austria's deposit starts | past | https://www.ris.bka.gv.at/Dokumente/BgblAuth/BGBLA_2023_II_283/BGBLA_2023_II_283.html |
| 2025-02-11 | PPWR enters into force | past | https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=OJ:L_202500040 |
| 2025-10-01 | Poland's deposit starts | past | https://www.gov.pl/web/klimat/system-kaucyjny |
| 2026-08-12 | PPWR and Article 50 apply | past | https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=OJ:C_202603084 |
| 2027-01-01 | Austria at 90%; Portugal at 80% | next | https://www.bmluk.gv.at/themen/abfall-und-kreislaufwirtschaft/abfallsammlung-behandlung-und-verbringung/verpackungen/einweg/ein-jahr-einwegpfand.html |
| 2027-02-12 | Article 56(7) reporting act due | next | https://green-forum.ec.europa.eu/packaging-and-packaging-waste-regulation-implementation_en |
| 2028-01-01 | Exemption requests and plans due | next | https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=OJ:C_202603084 |
| 2028-04-01 | Commission revision window ends | next | https://lxgesetze.de/ppwr/50 |
| 2029-01-01 | 90% target and Annex X apply | next | https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=OJ:C_202603084 |
| 2034-01-01 | Earliest deposit date after a lost exemption | next | https://lxgesetze.de/ppwr/50 |
| 2035-01-01 | Annex X for older schemes below 90% | next | https://eur-lex.europa.eu/legal-content/EN/TXT/HTML/?uri=OJ:C_202603084 |
| 2038-01-01 | Commission assessment of Article 50 | next | https://lxgesetze.de/ppwr/50 |
Methodology
- Data used: SPI Regulation Tracker rule notes PR-EU-007 and PR-EU-001, the national deposit rules PR-AT-001, PR-IE-001, PR-PL-001 and PR-PT-001, and SPI jurisdiction notes for Austria, Ireland, Poland, Portugal, Germany, Spain and France (data as of 14 October 2026). Key facts were brought up to date on 5 November 2026 against the Commission’s guidance, its April 2026 report on the Single-Use Plastics Directive, BMLUK, Re-turn, APA and MITECO.
- Legal text: the EUR-Lex HTML of Regulation (EU) 2025/40 carries the recitals only, so Article 50 paragraphs (1), (2), (5) and (11) and Annex X point (l) were read as quoted in Commission Notice C/2026/3084. Paragraphs (3), (4), (6) to (10) and (12) and the other Annex X points were read in two unofficial German consolidated texts (lxgesetze.de and gesetze.legal), which agreed with each other, and Article 50(4) also in APA’s May 2026 note. Points from those texts are marked “unofficial text” and are not yet matched against the English Official Journal.
- Collection rates: 2022 separate collection rates for single-use plastic beverage bottles come from Annex 3 of COM(2026) 160, as reported under Directive (EU) 2019/904. They exclude metal containers, use national methods and, in the Commission’s words, may not be especially meaningful to compare across countries.
- Framework: Exhibit 6 combines those rates with the annex’s deposit status column, which cites EEA country profiles of 2024 and 2025, and with SPI’s own tracker for Austria, Ireland, Poland, Portugal and Germany. Where the annex predates a launch SPI has tracked, the tracker wins.
- Calculations: gaps, tonnes and dates are SPI’s arithmetic from the cited figures. Exhibit 9 holds 2023 Spanish tonnage constant and uses assumed rates. Money appears only in euro and is not combined across schemes.
- Cut-off: 5 November 2026.
- Limitations: SPI has not yet confirmed whether any Member State has filed an Article 50(5) request, how the Commission reads “established before entry into force” for Poland and Portugal, whether the exemption can apply to one format only, the current deposit status of Romania and Malta, or Spain’s final 2023 rate and deposit start. This is not legal advice; check with counsel.
FAQ
Is a deposit return system mandatory under the PPWR?
Yes, by default. Article 50(2) of Regulation (EU) 2025/40 requires every Member State to run a deposit and return system for single-use plastic drinks bottles and metal drinks containers up to 3 litres, charged at the point of sale, to reach 90% separate collection by 1 January 2029. Only a state qualifying under Article 50(5) escapes.
What is the PPWR deposit return exemption?
A Member State is exempt from the deposit duty if it separately collected 80% or more by weight of the covered packaging first placed on its market in 2026 and, by 1 January 2028, sends the Commission a request with a plan to reach 90%. The Commission may ask for a revised plan within three months.
Which EU countries need a deposit return system by 2029?
Every state without a scheme, unless it reaches 80% in 2026. On the Commission’s 2022 data and status table, Italy, Luxembourg, France, Cyprus, Spain, Greece, Bulgaria and Slovenia were well below 80%, while Belgium was at 78.21% and Czechia at 74.20%. Romania’s and Malta’s current status still needs confirming against an official act.
Does the PPWR deposit rule cover glass bottles and cartons?
No. Article 50 makes deposits mandatory only for single-use plastic drinks bottles and single-use metal drinks containers up to 3 litres. Member States are asked to endeavour to add single-use glass bottles and drinks cartons, and may add other packaging under Article 50(9). Several national schemes already decide glass in their own way.
Are wine, spirits and milk in the PPWR deposit system?
Not by obligation. Article 50(4) takes wine and aromatised wine products, other fermented drinks under CN code 2206 00, spirit drinks under CN heading 2208, and milk and milk products out of the deposit duty. A Member State may still include them. Containers under 0.1 litres can be excluded only where taking part is technically impossible.
What are the Annex X minimum requirements for deposit systems?
Annex X sets 15 minimums: a single or coordinated operator that is non-profit and independent, fair access for producers, a minimum deposit level, financial capacity, transparent fees, reporting, retailer take-back, refunds without a purchase and clear marking. They apply from 1 January 2029; schemes set up before 11 February 2025 are spared only at 90% collection.
Sources
- EUR-Lex, Regulation (EU) 2025/40 on packaging and packaging waste, OJ L, 22.1.2025, recitals 141 to 146, consulted 2026-11-05.
- EUR-Lex, Commission Notice C/2026/3084, Guidance document for Regulation (EU) 2025/40, sections 28 to 30, consulted 2026-11-05.
- Council of the EU, ST 8316/26, Commission report COM(2026) 160 final on Member States’ reporting on single-use plastic items and on fishing gear, 16 April 2026, pages 10 and 11 and Annex 3, consulted 2026-11-05.
- European Commission Green Forum, PPWR implementation timeline, consulted 2026-11-05.
- EUR-Lex, Directive (EU) 2019/904 on single-use plastics, Article 9, consulted 2026-10-14.
- Agência Portuguesa do Ambiente, Enquadramento comparado do Sistema de Depósito e Reembolso à luz do UNILEX e do Regulamento (UE) 2025/40, May 2026, consulted 2026-11-05.
- Agência Portuguesa do Ambiente, Perguntas frequentes SDR, v2.6, 5 June 2026, consulted 2026-10-14.
- Government of Portugal, Volta, sistema de depósito e reembolso de embalagens entra em vigor, 13 April 2026, consulted 2026-10-14.
- BMLUK, Ein Jahr Einwegpfand, consulted 2026-11-05.
- RIS, Pfandverordnung für Einweggetränkeverpackungen, BGBl. II Nr. 283/2023, consulted 2026-10-14.
- Re-turn, 2025 Annual Report, consulted 2026-11-05.
- Irish Statute Book, S.I. No. 33/2024, Separate Collection (Deposit Return Scheme) Regulations 2024, consulted 2026-10-14.
- Dz.U. 2024 poz. 1911, Act of 21 November 2024 amending the Polish packaging Act, consulted 2026-11-04.
- gov.pl, Ministry of Climate and Environment, System kaucyjny, consulted 2026-11-04.
- MITECO, Informe recogida separada botellas SUP, año 2023, November 2024, consulted 2026-11-05.
- lxgesetze.de, Artikel 50 PPWR, unofficial German consolidated text, consulted 2026-11-05.
- gesetze.legal, Artikel 50 VO (EU) 2025/40, unofficial German text, consulted 2026-11-05.
- gesetze.legal, Anhang X VO (EU) 2025/40, unofficial German text, consulted 2026-11-05.
- SPI Regulation Tracker, rule notes PR-EU-007, PR-EU-001, PR-AT-001, PR-IE-001, PR-PL-001 and PR-PT-001, and jurisdiction notes AT, IE, PL, PT, DE, ES and FR, data as of 14 October 2026, consulted 2026-11-05.
Go deeper
- SPI Regulation TrackerPR-EU-007
- SPI LedgerFour deposit return schemes now run in the tracked EU markets, and the UK's four nations start together in October 2027Ireland (February 2024), Austria (January 2025), Poland (October 2025) and Portugal (April 2026) now charge deposits on drinks containers; England, Northern Ireland, Scotland and Wales follow…
- SPI LedgerThe PPWR now applies, but its label, recyclability and empty-space dates move with Commission acts that are already running lateSince 12 August 2026 the EU Packaging and Packaging Waste Regulation (PPWR) applies directly in every Member State, yet only its PFAS limit for food-contact packaging…