SPI NewsUnited States · Washington toxics in packaging
Ecology drafts a Washington PVC packaging reporting requirement, not a ban; comments close 18 December
Washington’s Department of Ecology proposes that firms report PVC and PVDC in plastic packaging, of which it estimates 9,000 to 13,000 US tons are used in the state each year; comments close on 18 December 2026.
Key takeaways
- Ecology’s draft report of November 2026 (publication 26-04-042) proposes a reporting requirement for PVC and PVDC in plastic packaging under Safer Products for Washington, not a restriction or ban.
- Ecology’s comment page says comments are open from 3 November to 11:59 p.m. PT on 18 December 2026, on the draft report, a technical report (26-04-043) and a market analysis (26-04-045).
- The draft estimates that 9,000 to 13,000 US tons of PVC and PVDC packaging are used in Washington each year, a figure Ecology scaled from national and international data.
- Ecology plans final determinations by June 2027 and adopted rules by June 2028, and says it may change the documents after reading the comments.
- SPI analysis: Washington now has two separate packaging tracks, a toxics law that can require reporting or restrictions and an EPR law with fees that must reward lower toxic content, so PVC and PVDC data built for one can serve the other.
9,000
Low estimate of PVC and PVDC packaging used in Washington
US tons per year, scaled by Ecology from national and international data
Ecology, publication 26-04-042, p. 13
13,000
High estimate of PVC and PVDC packaging used in Washington
US tons per year, same method
Ecology, publication 26-04-042, p. 13
38
Days left to comment from 10 November
Comment period runs 3 November to 18 December 2026, 11:59 p.m. PT
Ecology comment page; SPI calculation
Source: Washington Department of Ecology, publication 26-04-042 and comment page; day count by SPI's calculation (SPI summary), checked 22 Nov 2026.
The Washington PVC packaging reporting requirement is a draft, not a rule. On 3 November 2026 the Washington State Department of Ecology published draft regulatory determinations under Safer Products for Washington that would require reporting of polyvinyl chloride (PVC) and polyvinylidene chloride (PVDC) in plastic packaging, with public comment open until 11:59 p.m. Pacific time on 18 December 2026.
A reporting requirement is not a restriction. Ecology’s draft report to the Legislature, publication 26-04-042, says it has not finished its review of plastic packaging and wants more data on how much PVC and PVDC is used in Washington. It has not yet said what manufacturers would have to report, or from when; those details are for rulemaking, which Ecology expects to finish by June 2028.
For packaging buyers the draft matters because it names two packaging polymers and their components. Ecology describes PVDC as a thin oxygen and moisture barrier layer, and PVC as used mainly in rigid and flexible packaging. Ecology says it will carry its plastic packaging analysis into the program’s next cycle, so the reporting data would feed a later decision.
How Safer Products for Washington works
Safer Products for Washington is the program Ecology runs with the Department of Health under the Toxic Pollution law, Chapter 70A.350 RCW. Ecology’s program page describes five-year cycles with four phases: prioritize chemicals, identify products, determine regulatory actions, and rulemaking. Cycle 2 is now in phase 3, the determinations stage.
At phase 3 Ecology chooses among three outcomes for each priority product. Its draft report says a reporting requirement is one of the three options under RCW 70A.350.040(1), and would require a manufacturer to give notice of its use of a priority chemical or class of priority chemicals, consistent with RCW 70A.430.060. The other options are a restriction, where Ecology finds safer alternatives that are feasible and available, and no action.
The program has touched packaging before. Ecology’s program page lists phenolic compounds in food and drink can linings among Cycle 1 products, under a rule adopted on 31 May 2023, with restrictions starting on 1 January 2025 and first reports due on 31 January 2025. Cycle 1.5, which addresses intentionally added PFAS, brought reporting duties from 1 January 2026 and restrictions from 1 January 2027.
Plastic packaging entered Cycle 2 in June 2025. Ecology’s Phase 2 report, publication 25-04-030, named it a priority product for organochlorine substances, PVC and PVDC, and defined it by reference to packages and packaging components in RCW 70A.222.010. That report also flagged recycling as a weak point.
“The recycling rate for post-consumer PVC and PVDC in Washington is extremely low because no facilities in the state can recycle these materials at scale.”
What Ecology proposed on 3 November
The comment period. Ecology’s comment page opened comment at midnight on 3 November 2026 and closes at 11:59 p.m. PT on 18 December 2026, which is 45 days by SPI’s calculation. Comments go to Ecology through its online comment form, by email or by post to its Hazardous Waste and Toxic Reduction Program in Olympia.
The documents. Three drafts are open: the legislative report (26-04-042), which sums up draft determinations for the 15 priority products in Cycle 2; the Technical Supporting Documentation (26-04-043), which covers the same products and their alternatives in detail; and a Draft Market Analysis (26-04-045) for a subset of products and chemicals.
The packaging determination. On page 14 of the legislative report, Ecology states its decision for the category in one sentence.
“Our draft regulatory determination is a reporting requirement for PVC and PVDC in plastic packaging.”
The reason for reporting. Ecology says on page 13 that it has made progress on plastic packaging and expects to find some safer, feasible and available alternatives eventually, but that its review is not complete. It plans to extend its analysis of the category into Cycle 3 of the program, and frames reporting as a way to gather data in the meantime.
The scope. The report says plastic packaging includes both packages and packaging components, and gives wrapping films, bags, coatings, closures and labels as examples. Items the end consumer is meant to keep for more than one year are excluded. SPI has not yet confirmed any further scope detail, such as how the rule would treat packaging that only contains a PVDC layer or coating.
The webinar. Ecology scheduled an online webinar on the drafts for 10 November 2026, from 12:30 to 2 p.m. PT. SPI has not yet confirmed what Ecology said there.
| Element | What the draft says | What it means for packaging firms |
|---|---|---|
| Determination | Reporting requirement for PVC and PVDC in plastic packaging | Notice of use, not a restriction or ban |
| Legal basis | One of three options in RCW 70A.350.040(1) | Restriction and no action were the other options |
| Products covered | Packages and packaging components, such as wrapping films, bags, coatings, closures and labels | Components count, not only the main pack |
| Exclusion | Items for storage over one year by the end consumer | Durable storage items fall outside |
| Volume estimate | 9,000 to 13,000 US tons a year used in Washington | Ecology's estimate, scaled from national and international data |
| What must be reported | Not stated in the draft | SPI has not yet confirmed; set in rulemaking |
| When reporting starts | Not stated in the draft | SPI has not yet confirmed; rules expected by June 2028 |
| Next review | Analysis continues in Cycle 3 | A later restriction is not ruled out |
Source: Washington Department of Ecology, publication 26-04-042, pp. 2, 13, 14 and 16; comment page (SPI summary), checked 22 Nov 2026.
Draft determination only. No rule exists yet. SPI summary of Ecology's report, not the text of any rule. Not legal advice.
What the Washington PVC packaging reporting requirement covers
PVC and PVDC are both organochlorine plastics, chlorine-containing polymers. Ecology’s draft separates them by use. PVC, it says on page 13, is used mainly in rigid and flexible packaging for physical protection and display of the packed product.
“PVDC is primarily used as a thin layer in packaging to act as a barrier to oxygen and moisture.”
The report’s volume estimate is a range. Ecology says between 9,000 and 13,000 US tons of PVC and PVDC packaging is used each year in Washington, scaling national and international data to the state’s population. The draft does not split that range between the two polymers, and SPI has not yet confirmed a split from the technical report.
Ecology names three routes of concern. The first is exposure during production, use and disposal, including exposure to residual chemicals in the packaging. The second is the release of microplastics and nanoplastics as packaging breaks down. The third is the formation of other highly toxic organochlorine substances when PVC and PVDC break down under heat, as in landfill fires or backyard burning.
Ecology’s June 2025 Phase 2 report gave more of the background. It noted that residual vinyl chloride from manufacturing can be found in packaging, while stating that packaging is not considered a major source of exposure for the general population, and it described dioxin formation as higher in uncontrolled burning than in commercial incineration.
The technical report (publication 26-04-043) holds the detail behind the draft. Its Chapter 12, on PVC and PVDC in plastic packaging, starts on page 194, and its Table 52 lists packaging applications with potential feasible alternative polymers. SPI has not yet confirmed which applications or alternatives Ecology names in that chapter.
Where packaging sits among the 15 Cycle 2 products
Table 1 of the draft report sets out a determination for each priority product and chemical pair. Most are restrictions. Plastic packaging and motor vehicle tires (for 6PPD) are the two categories where the whole determination is reporting, by SPI’s reading of the table.
Two more categories are split. For PFAS in architectural paints, Ecology proposes a restriction for most uses and reporting for special purpose paints. For organohalogen flame retardants in insulation, it proposes a restriction for rigid polyiso foam roofing assemblies and reporting for other insulation. Printing inks, assessed for PCBs, get no action at this time.
For tires, the draft says Ecology intends to clarify the specifics of the reporting requirement during rulemaking. The plastic packaging section gives no detail either, so both reporting categories wait on the same rule process.
| Priority product | Chemical or class | Draft determination |
|---|---|---|
| Plastic packaging | PVC and PVDC | Reporting requirement |
| Motor vehicle tires | 6PPD | Reporting requirement |
| Architectural paints | PFAS | Restriction for most uses; reporting for special purpose paints |
| Insulation | Organohalogen flame retardants | Restriction for rigid polyiso roofing assemblies; reporting for other insulation |
| Printing inks | PCBs | No action at this time |
| Architectural paints | APEs | Restriction |
| Artificial turf | PFAS | Restriction |
| Artificial turf | 6PPD | Restriction |
| Cookware and kitchen supplies | PFAS | Restriction |
| Cosmetics | cVMS | Restriction |
| Firefighting PPE | PFAS | Restriction |
| Floor waxes and polishes | PFAS | Restriction |
| Hard surface sealers | PFAS | Restriction |
| Jewelry and accessories | Cadmium; lead | Restriction |
| Nail products | BTEX substances | Restriction |
| Sealants, caulks and adhesives | Ortho-phthalates | Restriction |
| Solid deodorizers | 1,4-DCB | Restriction |
Source: Washington Department of Ecology, publication 26-04-042, Table 1, pp. 4 and 5 (SPI summary), checked 22 Nov 2026.
Draft determinations as listed by Ecology. Some products appear twice because Ecology assessed two chemical classes. The report's own totals on p. 16 count categories differently, so SPI does not give a total. Draft only; not legal advice.
Industry reaction
Ecology’s own statements are the only published positions on the packaging draft that SPI has confirmed so far. SPI has not yet confirmed any statement from packaging trade bodies, converters, brand owners or NGOs on the PVC and PVDC determination.
“This will allow us to collect more information on PVC and PVDC packaging used in Washington to strengthen our analysis.”
The sentence follows Ecology’s determination on page 14 and sets out the purpose of the reporting duty: data for the Cycle 3 analysis, not a limit on use.
The comment page sets out what happens to responses once the period ends.
“When the public comment period ends, we will consider all comments and may change the documents based on them.”
The same page says Ecology plans to publish its final regulatory determinations to the Legislature by June 2027, so the reporting proposal could still change before it reaches rulemaking.
Ecology’s Phase 2 report of June 2025, the step that named plastic packaging a priority product, gave the waste side of the case. Besides the recycling sentence quoted above, it said most PVC and PVDC packaging in Washington ends up in landfill, with some incinerated or burned.
Who gains and who pays under a reporting duty
Brand owners selling packed goods into Washington. If the rule follows the statute’s notice model, the firms defined as manufacturers would have to say where they use PVC or PVDC. SPI has not yet confirmed who would carry the duty for packaging, whether brand owner, packaging maker or importer; the rule will set that.
Converters and film suppliers. Makers of PVDC-coated or PVDC-laminated films, PVC films and rigid PVC packs would face data requests from customers who need to report. Ecology’s scope names coatings, closures and labels, so suppliers of components as well as main packs are in view.
Suppliers of alternative barrier materials. Ecology’s technical report lists potential feasible alternative polymers for packaging applications, and the draft says Ecology expects eventually to find some safer, feasible and available alternatives. A reporting phase gives those suppliers time, not a mandate.
Recyclers and local governments. Ecology’s Phase 2 report says no facilities in the state can recycle PVC and PVDC at scale. Data on 9,000 to 13,000 US tons a year could help show how much of that stream reaches landfills and burning.
Ecology. The department gains the data it says it needs for Cycle 3. It also takes on a new notice stream to receive and analyse, alongside reporting for tires, some paints and some insulation.
Firms selling only long-life storage products. Items intended for storage by the end consumer for more than one year are outside the category, so durable storage containers would not be caught.
| Group | Exposure under the draft | Figure or date | Source |
|---|---|---|---|
| Brand owners selling into Washington | Possible notice of PVC or PVDC use, if defined as manufacturers | Rules expected by June 2028 | Ecology, 26-04-042 |
| Film and component suppliers | Customer data requests on films, coatings, closures and labels | Comment close 18 Dec 2026 | Ecology, 26-04-042 |
| Alternative barrier suppliers | Analysis of alternatives continues in Cycle 3 | No restriction proposed now | Ecology, 26-04-042 |
| Recyclers and local governments | Data on a stream not recycled at scale in the state | 9,000 to 13,000 US tons a year | Ecology, 26-04-042 and 25-04-030 |
| Durable storage products | Outside the category | Over one year with the end consumer | Ecology, 26-04-042 |
Source: Washington Department of Ecology, publications 26-04-042 and 25-04-030 (SPI summary), checked 22 Nov 2026.
SPI summary of a draft determination. Who carries the duty will be set in rulemaking; SPI has not yet confirmed it. Exposures differ in kind, so do not add or rank rows. Not legal advice.
The pinch point: what firms would report
The draft is silent on content. It does not say whether firms would report by product, by polymer, by weight, by unit or by component, nor how often, nor from which date. Ecology’s report for tires says the specifics will be clarified in rulemaking, and the packaging section offers nothing more, so SPI has not yet confirmed the shape of any packaging report.
That matters because packaging data is hard to collect. A PVDC coating may make up a small share of a film’s weight, and a PVC closure liner or label may come from a different supplier than the main pack. Ecology’s own scope names coatings, closures and labels, which pulls these small components in.
The volume estimate shows the data gap. The upper end of Ecology’s range, 13,000 US tons a year, is about 44% above the lower end of 9,000 US tons, by SPI’s calculation, and the draft does not split it between PVC and PVDC. A reporting duty is the tool Ecology has chosen to narrow that range before it decides, in Cycle 3, whether any restriction is warranted.
SPI analysis
The comment period is the point at which the reporting design can still be argued, before a preliminary draft rule that Ecology expects in summer or early autumn 2027. Firms that already track polymer content by component for EPR fee declarations elsewhere are better placed to answer data requests than those that hold data only by pack.
What the comment window can and cannot change
The comment period is the first of several steps before any reporting duty exists. Ecology’s draft report says rulemaking begins in late 2026, runs alongside the final determinations, and moves through two drafts before adoption.
Final determinations. Ecology plans to publish its final regulatory determinations report to the Legislature by June 2027. That report fixes whether plastic packaging stays on the reporting track, moves to a restriction, or drops to no action. Comments filed by 18 December feed that report.
Preliminary draft rule. Ecology expects a preliminary draft rule in summer or early autumn 2027, for discussion and public input. This is where the content of a packaging report, such as the unit of reporting and the parties who file, would first appear in writing.
Formal draft rule. A formal draft rule with public hearings is expected by early 2028, giving a second formal comment point on the reporting design.
Adoption. Ecology expects to adopt rules implementing the final determinations by June 2028, unless the Legislature changes the determinations or the statutory timeline. SPI has not yet confirmed when a first packaging report would be due after adoption.
SPI analysis
Firms that want to shape the scope of the category, such as how coatings and labels are treated, have most leverage now, because the June 2027 report sets which products the rule may cover. Firms concerned mainly with reporting mechanics have a further chance in the 2027 and 2028 rule drafts.
How Safer Products differs from Washington's EPR and recycled content laws
Washington now regulates packaging under at least three separate laws, each with its own purpose and agency process. Safer Products for Washington, Chapter 70A.350 RCW, is a chemicals law: it can require reporting or restrict a priority chemical in a priority product, as the draft report sets out.
The Recycling Reform Act, Chapter 70A.208 RCW, is the state’s packaging EPR law. Ecology’s program page says producers join a producer responsibility organization, pay annual fees and report information, and that after March 2029 producers who are not members cannot sell their products in Washington. SPI’s tracker record PR-US-008 notes that RCW 70A.208.160 requires fees to reward cuts in toxic substances, among other design factors. The same record shows that a producer is caught if it introduced one ton or more of covered materials in its last fiscal year or had USD 5,000,000 or more in worldwide revenue, that the PRO plan is due on 1 October 2028, and that Ecology may fine producers up to USD 1,000 per violation per day, rising to USD 10,000 for a second or later violation.
The recycled content law sits in Chapter 70A.245 RCW, the 2021 act that also banned some expanded polystyrene products. SPI’s record PR-US-012 shows RCW 70A.245.020 setting postconsumer recycled content minimums for plastic beverage containers, household cleaning and personal care containers and trash bags, with beverage containers at 25% from 2026 to 2030 and 50% from 2031.
SPI analysis
The three laws overlap at the pack. A PVDC-coated film could be reported under Safer Products, declared for fees under the EPR law, and, if it wraps a covered product, sit beside a recycled content duty. None of the three cross-refers to the others on PVC or PVDC, by SPI’s reading of the texts and records cited here.
| Feature | Safer Products (Ch. 70A.350 RCW) | Recycling Reform Act (Ch. 70A.208 RCW) | Recycled content (RCW 70A.245.020) |
|---|---|---|---|
| Purpose | Reduce priority chemicals in priority products | Producer-funded recycling of packaging and paper | Minimum postconsumer content in some plastic products |
| Packaging tool | Reporting or restriction by product and chemical | PRO membership, fees and reporting to the PRO | Content floor averaged by weight per producer |
| PVC and PVDC | Draft reporting requirement, 3 Nov 2026 | Fees must reward lower toxic content (RCW 70A.208.160) | Not addressed by polymer |
| Next date | Comments close 18 Dec 2026 | Collection lists and needs assessments, 2027 | Beverage containers 50% from 2031 |
| Stage | Draft; rules expected by June 2028 | In force; market access limit from 1 Mar 2029 | In force |
Source: Ecology, publication 26-04-042 and Recycling Reform Act page; SPI Regulation Tracker PR-US-008 and PR-US-012 (SPI summary), checked 14 Oct 2026.
SPI comparison. The Safer Products row is a draft determination only. Dates and duties as stated in the sources; not legal advice.
How PVC is treated in European packaging fees
Europe offers a guide to how PVC can be priced even without a ban. SPI’s fee-market data, drawn from each scheme’s published tables, shows three large schemes charging PVC packaging far more per tonne than a clear PET bottle.
In Belgium, Fost Plus places PVC packaging under code 014-03, a penalty line that also covers PETG items, charged at the non-recyclable rate of EUR 4.4190 per kg in 2026, against EUR 0.3604 per kg for colourless PET bottles, according to SPI’s Fost Plus analysis9. That is about 12.3 times, by SPI’s calculation.
In France, Citeo’s 2026 tariff charges packaging containing PVC EUR 2,100.1 per tonne, against EUR 700.0 for a clear PET bottle, as SPI’s Citeo analysis shows10, or 3.0 times by SPI’s calculation. In Italy, CONAI’s band C for plastic not sortable or recyclable with current technology, which includes PVC from 2026, pays EUR 922 per tonne from 1 October 2026, against EUR 304 for band B1.2 PET, about 3.0 times by SPI’s calculation from SPI’s CONAI analysis.
SPI analysis
Washington’s EPR fees are not yet set, and the PRO plan is due on 1 October 2028 under the SPI tracker record. The European tables show the kind of fee gap a toxics-weighted schedule can create, and data gathered for a Safer Products report would be the same data a PRO would need to price PVC and PVDC.
| Scheme and line | PVC line, EUR per tonne | PET bottle line, EUR per tonne | Ratio |
|---|---|---|---|
| Fost Plus, Belgium, 2026: code 014-03 (includes PVC and PETG) against colourless PET bottles | 4,419.0 | 360.4 | 12.3 |
| Citeo, France, 2026: packaging containing PVC against clear PET bottle | 2,100.1 | 700.0 | 3.0 |
| CONAI, Italy, from 1 Oct 2026: band C against band B1.2 PET | 922.0 | 304.0 | 3.0 |
Source: SPI fee-market data from Fost Plus 2026 rate table, Citeo 2026 tariff guide and CONAI 2026 value table, as used in SPI Ledger pages (SPI summary), checked 13 Oct 2026.
EUR per tonne; Belgium converted from EUR per kg by SPI. Ratios by SPI's calculation. Each scheme sets its own material classes and cost basis, so rates are not comparable across schemes and are not summed, averaged or ranked. Washington has no EPR fee schedule yet.
What it means for you
SPI analysis
These points follow from Ecology’s draft and SPI’s data. They are not legal advice; a draft determination creates no duty today.
- Brand owners: Ecology’s scope names coatings, closures and labels as well as main packs, so PVC and PVDC use in a Washington range sits at component level as well as SKU level, whatever the final reporting format.
- Packaging buyers: polymer declarations from film and component suppliers that identify PVDC layers and PVC parts are the kind of data a later reporting request would draw on, by SPI’s reading.
- Converters: customer requests for component-level data are a likely first effect, by SPI’s reading, and Ecology plans to continue its Chapter 12 analysis of alternatives into Cycle 3.
- Regulatory teams: the comment window closes at 11:59 p.m. PT on 18 December 2026. Comments go to Ecology through its online comment form; Ecology says it may change the documents after reading them.
- EPR teams: PVC and PVDC tonnage data could serve both a Safer Products notice and future fee declarations under Chapter 70A.208 RCW, whose fees must reward lower toxic content.
- Sustainability teams: the European fee gaps in this piece show how PVC is already priced elsewhere, and SPI’s flexible packaging analysis covers barrier film recyclability.
Washington’s EPR law is tracked in the SPI Regulation Tracker record PR-US-008 and the SPI Ledger on Chapter 70A.208 RCW, and recycled content floors in SPI’s US recycled content analysis.
- past
- event
- next
- Cycle 1 restrictions start, including phenolic compounds in can liningspast
- Phase 2 report (month only: June) names plastic packaging a priority productpast
- Cycle 1.5 PFAS reporting takes effectpast
- Draft determinations published; PVC and PVDC reporting proposedevent
- Ecology webinar on the draftsnext
- Comment period closes, 11:59 p.m. PTnext
- Final determinations report to the Legislature, by June 2027next
- Rules adopted, expected by June 2028next
- EPR law: non-members may not sell covered packagingnext
Source: Ecology, Safer Products for Washington page, publications 26-04-042 and 25-04-030, comment page; SPI Regulation Tracker PR-US-008 (SPI summary), checked 14 Oct 2026.
Show the data
| Date | Label | Category | Link |
|---|---|---|---|
| 2025-01-01 | Cycle 1 restrictions start, including phenolic compounds in can linings | past | https://ecology.wa.gov/Waste-Toxics/Reducing-toxic-chemicals/Washington-s-toxics-in-products-laws/Safer-Products-for-Washington |
| 2025-06-01 | Phase 2 report (month only: June) names plastic packaging a priority product | past | https://apps.ecology.wa.gov/publications/documents/2504030.pdf |
| 2026-01-01 | Cycle 1.5 PFAS reporting takes effect | past | https://ecology.wa.gov/Waste-Toxics/Reducing-toxic-chemicals/Washington-s-toxics-in-products-laws/Safer-Products-for-Washington |
| 2026-11-03 | Draft determinations published; PVC and PVDC reporting proposed | event | https://apps.ecology.wa.gov/publications/documents/2604042.pdf |
| 2026-11-10 | Ecology webinar on the drafts | next | https://ecology.wa.gov/events/hwtr/spwa-cycle-2/cycle-2-phase-3-draft-regulatory-determinations-public-comment |
| 2026-12-18 | Comment period closes, 11:59 p.m. PT | next | https://ecology.wa.gov/events/hwtr/spwa-cycle-2/cycle-2-phase-3-draft-regulatory-determinations-public-comment |
| 2027-06-30 | Final determinations report to the Legislature, by June 2027 | next | https://apps.ecology.wa.gov/publications/documents/2604042.pdf |
| 2028-06-30 | Rules adopted, expected by June 2028 | next | https://apps.ecology.wa.gov/publications/documents/2604042.pdf |
| 2029-03-01 | EPR law: non-members may not sell covered packaging | next | /data/packaging-regulation-tracker/united-states/pr-us-008/ |
What to watch next
- 10 Nov 2026: Ecology’s webinar on the drafts, 12:30 to 2 p.m. PT; SPI has not yet confirmed what is said there.
- 18 Dec 2026: comment period closes at 11:59 p.m. PT on the draft report, the technical report and the market analysis.
- 1 Jan 2027: Cycle 1.5 PFAS restrictions take effect under Safer Products for Washington.
- By June 2027: Ecology publishes final regulatory determinations to the Legislature, including the plastic packaging decision.
- Summer or early autumn 2027: Ecology expects a preliminary draft rule for discussion and public input.
- Early 2028: formal draft rule with public hearings expected.
- By June 2028: Ecology expects to adopt rules, unless the Legislature changes the determinations or the statutory timeline.
- No date confirmed by SPI: what packaging firms would report, who would report, and when Cycle 3 analysis of plastic packaging begins.
FAQ
Is Washington banning PVC packaging?
No. Ecology’s draft of 3 November 2026 proposes a reporting requirement for PVC and PVDC in plastic packaging, not a restriction. Ecology says its review is not complete and it will continue the analysis in Cycle 3 of Safer Products for Washington, so a later restriction has not been ruled out, but none is proposed now.
What is the Washington PVC packaging reporting requirement?
It is a draft determination under Chapter 70A.350 RCW that manufacturers give notice of their use of PVC and PVDC in plastic packaging. Ecology has not said what would be reported or from when. Those details come in rulemaking, which Ecology expects to finish by June 2028, after final determinations by June 2027.
When do comments on the Safer Products Cycle 2 drafts close?
Comments close at 11:59 p.m. Pacific time on 18 December 2026, after opening on 3 November. They cover the draft legislative report, the technical supporting documentation and the market analysis. Ecology accepts comments through its online form, by email or by post, and says it may change the documents after reading them.
What packaging does the draft cover?
The draft covers packages and packaging components made with PVC or PVDC, and gives wrapping films, bags, coatings, closures and labels as examples. Items the end consumer is meant to keep for more than one year are excluded. Ecology estimates 9,000 to 13,000 US tons of such packaging are used in Washington each year.
How is this different from Washington's packaging EPR law?
Safer Products for Washington is a chemicals law that can require reporting or restrict chemicals in products. The Recycling Reform Act, Chapter 70A.208 RCW, makes producers fund recycling through a producer responsibility organization, with sales limited for non-members from March 2029. Its fees must reward lower toxic content, but it does not single out PVC.
Sources
- Washington State Department of Ecology, Draft Regulatory Determinations Report to the Legislature: Safer Products for Washington Cycle 2, Phase 3 (Publication 26-04-042), November 2026, consulted 2026-11-10.
- Washington State Department of Ecology, Cycle 2, Phase 3 draft regulatory determinations public comment, 3 November 2026, consulted 2026-11-10.
- Washington State Department of Ecology, Safer Products for Washington, undated, consulted 2026-11-10.
- Washington State Department of Ecology, Identification of Priority Products, Report to the Legislature: Safer Products for Washington Cycle 2 Phase 2 (Publication 25-04-030), June 2025, consulted 2026-11-10.
- Washington State Department of Ecology, Recycling Reform Act, undated, consulted 2026-11-10.
- SPI Regulation Tracker, PR-US-008: Washington Recycling Reform Act, Chapter 70A.208 RCW, record data as of 14 October 2026, consulted 2026-11-10.
- SPI Regulation Tracker, PR-US-012: Washington expanded polystyrene prohibitions and recycled content, Chapter 70A.245 RCW, record data as of 14 October 2026, consulted 2026-11-10.
- SPI Ledger, Washington packaging EPR: what SB 5284 and Chapter 70A.208 RCW ask of producers, and when, consulted 2026-11-10.
- SPI Ledger, Fost Plus tarifs 2027: steel rises 77.6% and EPS 57.2% while glass, paper, clear PET and the penalty hold, consulted 2026-11-10.
- SPI Ledger, Citeo tarifs 2026: weight rates rose 12% to 31% and five maluses climbed ahead of the 2027 declaration, consulted 2026-11-10.
- SPI Ledger, Contributo ambientale CONAI 2027: glass and wood rise 20% and the importer tare rate is up 21% in a year, consulted 2026-11-10.
- SPI, Washington’s recycling needs assessment closes for comment on 30 October, 20 October 2026, consulted 2026-11-10.
- SPI Ledger, The flexible packaging problem: recyclability gaps and fee premiums, consulted 2026-11-10.
- Washington State Department of Ecology, Draft Technical Supporting Documentation: Safer Products for Washington Cycle 2, Phase 3 (Publication 26-04-043), November 2026, consulted 2026-11-10.
Go deeper
- SPI Regulation TrackerPR-US-008
- SPI Regulation TrackerPR-US-012
- SPI LedgerFlexible plastic is the format brands are furthest from making recyclable, and most EPR tables already charge it a premiumFlexible plastic packaging trails rigid by a wide margin on recyclability (Unilever reports 75% of its rigid plastic packaging but 15% of its flexible plastic packaging…