SPI LedgerNews analysis
Permen LHK P.75 tahun 2019: Indonesia's 30% producer roadmap, sector tables and 2030 phase-outs
Permen LHK P.75 tahun 2019, Regulation of the Minister of Environment and Forestry No. P.75/MENLHK/SETJEN/KUM.1/10/2019 on the Roadmap for Waste Reduction by Producers, in force since 5 December 2019, requires manufacturers of food, drinks, consumer goods and personal care products, food and beverage service businesses and retailers to plan, carry out and report a cut of 30% in their waste against what they generate in 2029, and its Annex I ends straws, single-use plastic bags and cutlery, foam food containers, PVC and PS packs and PP sachets under 50 ml or 50 g from 1 January 2030.
30%
Producer waste reduction target
Against waste generated in 2029, not a past year
P.75/2019, Art. 2(2)
8
Format lines ending 1 January 2030
Across the three sector tables and note b
P.75/2019, Annex I
11
Material rows in the sector tables
8 manufacturing, 2 food service, 1 retail
P.75/2019, Annex I part B
Source: BPK legal database: P.75/2019, Art. 2(2) and Annex I (SPI summary), checked 22 Nov 2026.
Counts are SPI's from the Annex I sector tables and notes. The roadmap period is 2020 to 2029.
The regulation sets no fee and no fine of its own, and the ministry, now KLH/BPLH, is drafting a replacement with a producer responsibility organisation (PRO) and full duties from 2028. This SPI Ledger reads the regulation table by table, from the eleven material rows of Annex I to the plan and report formats, and shows what the 30% means for a growing producer.
Executive summary
Indonesia’s packaging duty for producers is a ministerial regulation, not a fee law. P.75/2019 was set in Jakarta on 18 October 2019 by the Minister of Environment and Forestry and promulgated on 5 December 2019 in the State Gazette (Berita Negara) 2019 No. 1545. It implements Article 15(2) of Government Regulation No. 81 of 2012, which asked the minister to set a ten-year roadmap for producers to move to better materials. SPI’s Southeast Asia piece compares Indonesia with Vietnam and the Philippines; this piece goes deeper on the Indonesian text itself.
The regulation has 27 articles in six chapters and four annexes. The articles set the cycle: plan, carry out, monitor every six months, evaluate and report every year. Annex I is where the substance sits. Its part A is a ten-year schedule from 2020 to 2029; its part B holds three sector tables with eleven material rows, each split into limiting (R1), recycling (R2) and reuse (R3) actions, plus minimum pack sizes and the 1 January 2030 end dates.
The 30% is measured against 2029 generation, which the ministry’s January 2024 FAQ says is a projection from every SKU a producer sells. Exhibit 1 shows the consequence: the faster a producer grows, the more tonnes it must cut, and by SPI’s calculation a producer growing faster than about 4.0% a year can meet the 30% and still put more waste on the market in 2029 than in 2020.
Uptake has been thin. KLH/BPLH said on 6 October 2026 that 79 of 842 producers given guidance had submitted a roadmap and 28 had carried out and reported their commitments. The ministry is replacing the regulation, with enactment targeted for November 2026, registration, PROs and labels by the end of 2027 and full duties from 2028. As of 7 November 2026, SPI has not yet confirmed that the replacement has been signed.
For leaders, the practical reading is that P.75/2019 still binds until it is replaced, and its 2030 format list is the part most likely to survive in some form. Map every SKU against the eleven Annex I rows, file or update the plan, keep six-monthly monitoring records, and redesign straws, small sachets, PVC and PS packs before 2030 or before any earlier local ban.
Key findings
- P.75/2019 sets one number: a 30% reduction by producers against waste generated in 2029 (Art. 2(2)); Annex I part A has year columns from 2020 to 2029 but no yearly percentages.
- Annex I part B has eleven material rows: eight for manufacturing (PE, PET, PVC, PP, PS, aluminium cans, paper and glass), two for food and beverage services and one for retail (Exhibits 5 and 6).
- Eight format lines end on 1 January 2030, among them PVC and PS packs, PP sachets under 50 ml or 50 g, plastic straws, single-use bags and cutlery and foam food containers; an earlier local ban takes precedence (Annex I, notes b and c).
- The manufacturing table also sets minimum pack sizes, from 200 g for PE food packs to 1 litre for PET drink bottles and 220 ml for glass drink bottles (Exhibit 7).
- SPI calculation: for a producer with 1,000 tonnes in 2020, the 2029 target is 300.0 tonnes at flat sales and 506.8 tonnes at 6% growth a year; above about 4.0% growth a year, 2029 waste after the cut exceeds the 2020 level (Exhibits 1 and 11).
- The ministry reported 79 roadmaps submitted out of 842 producers given guidance, and reported producer reductions of about 242,000 tonnes in 2025, which is about 0.46% of national waste by SPI’s calculation (Exhibit 12).
- The regulation sets no fine; Article 21 points to other laws, and the ministry’s 2024 FAQ says administrative sanctions are planned mainly after 2029, in a second ten-year phase.
Permen LHK P.75 tahun 2019: where it sits in Indonesian law
P.75/2019 is the fourth link in a chain that starts with Law No. 18 of 2008 on Waste Management. Exhibit 2 sets out the chain. The regulation is tracked as PR-ID-001 on the Indonesia page of the SPI Regulation Tracker.
| Instrument | Date | What it does for producers |
|---|---|---|
| Law No. 18 of 2008 on Waste Management | 2008 | Parent law for waste reduction and handling |
| Government Regulation No. 81 of 2012 | Promulgated 15 October 2012 | Producer duties to limit, recycle and reuse (Arts. 12 to 14); Art. 15 asks for a ten-year roadmap |
| Presidential Regulation No. 97 of 2017 | Set 23 October 2017 | National targets of 30% reduction and 70% handling by 2025; producer duties are one strategy (Art. 4(1)(h)) |
| Permen LHK P.75/2019 | Set 18 October 2019; promulgated 5 December 2019 | Roadmap 2020 to 2029, 30% target, sector tables, 2030 end dates |
| KLHK FAQ handbook on P.75/2019 | January 2024 | How to compute the baseline and target, file the plan and report |
| Draft replacement EPR regulation | Public consultation 6 October 2026 | PRO, registration, recyclability-based fees, roadmap 2028 to 2037 |
Source: BPK legal database: P.75/2019; Berita Negara 2019 No. 1545; JDIH Kemenkeu: PP 81/2012; peraturan.go.id: Perpres 97/2017; KLHK FAQ, January 2024; KLH/BPLH, 6 October 2026 (SPI summary), checked 22 Nov 2026.
Dates as printed in each instrument or release. The replacement regulation is a draft, not law, as of 7 November 2026.
The gazette copy shows the Minister of Environment and Forestry as the signatory, and the Director General of Legislation at the Ministry of Law and Human Rights as the official who promulgated it. Article 27 brings it into force on the date of promulgation. On the BPK legal database record that SPI’s tracker uses, the regulation is listed as in force with no amendment or revocation.
One naming point trips readers. The ministry’s releases of 8 September 2026 refer to the instrument as Permen LHK No. 75 of 2018; the gazetted instrument is P.75 of 2019. The environment portfolio itself has also changed: the Ministry of Environment and Forestry (KLHK) that issued P.75/2019 now works as the Ministry of Environment and the Environmental Control Agency, KLH/BPLH. The regulation’s duties to report to “the Minister” now run to that ministry.
SPI analysis
For a compliance file, cite the regulation by its full number, P.75/MENLHK/SETJEN/KUM.1/10/2019, and its gazette entry, Berita Negara 2019 No. 1545. That pins the instrument whichever name the ministry uses in a given release.
The 27 articles in six chapters
The body of the regulation is short. Exhibit 3 maps it by chapter. The working parts for a producer are chapter II, which sets the cycle and the documents, and chapter IV, which sets the only consequences written into the text: awards and publication.
| Chapter | Articles | Count | What it does for a producer |
|---|---|---|---|
| I. General provisions | 1 to 5 | 5 | Definitions, the 2020 to 2029 period, the 30% target, the three sectors, covered materials, Annex I |
| II. Carrying out the roadmap | 6 to 17 | 12 | R1, R2 and R3 methods, take-back, residue, plan, filing, monitoring, evaluation, communication, report, checks |
| III. Duties and authorities | 18 to 21 | 4 | Supervision by the Minister, governors and regents or mayors; sanctions under other laws |
| IV. Incentives and disincentives | 22 to 25 | 4 | Awards and publicity for good performance; publication of poor performance |
| V. Financing | 26 | 1 | Public budgets fund government tasks; producers fund their own reduction |
| VI. Closing provisions | 27 | 1 | In force on promulgation |
Source: Berita Negara 2019 No. 1545; BPK legal database: P.75/2019 (SPI summary), checked 22 Nov 2026.
Chapter titles translated by SPI. Article summaries paraphrase the Indonesian text.
Who is a producer. Article 1 defines a producer as a business that makes goods using packaging, distributes packaged goods that come from imports, or sells goods in containers that cannot or can hardly be broken down by natural processes. Article 3 then limits the duty to three fields: manufacturing of food and beverages, consumer goods, and cosmetics and personal care; food and beverage services, meaning restaurants, cafes, catering and hotels; and retail, meaning shopping centres, modern stores and traditional markets.
What is covered. Article 4 targets products, packaging and containers that are hard to decompose, cannot be recycled or cannot be reused, made of plastic, aluminium cans, glass or paper. Article 6 sets the three methods: limiting waste (R1), recycling (R2) and reuse (R3). Article 7 requires recycling and reuse to run with take-back and collection points protected from rain and heat, with closed, labelled containers sorted by material, shape or colour, run alone or with licensed waste banks, TPS 3R sites or recycling businesses. Article 8 sends residue to processing.
How it is run. Articles 10 to 12 cover the plan and its filing; Article 13 requires monitoring at least once every six months, documented in writing; Article 14 compares results with targets and requires plan revisions where needed; Articles 15 and 20 cover consumer communication; Article 16 sets the report; Article 17 has the authorities check reports and record the result in an official report (berita acara).
Who pays. Article 26 splits costs: the state and regional budgets fund the work of the Minister and local governments, and producers bear the cost of their own waste reduction. The regulation states no amount, so no IDR figure attaches to it.
Annex I part A: the ten-year schedule
Annex I part A is headed “Tabel Peta Jalan Pengurangan Sampah oleh Produsen”, the producer waste reduction roadmap table. Its columns run from 2020 to 2029 under the heading “Tahapan Kegiatan Tahun/Target Pengurangan Sampah”, activity stages by year and waste reduction target. Its rows are the five stages of the cycle (Exhibit 4).
| Stage | What Annex I lists | Frequency in the text | Year columns |
|---|---|---|---|
| 1. Planning | Plan document; take-back facilities and mechanism, or cooperation with waste banks, TPS 3R or licensed businesses; trial runs | Once, then revised after evaluation (Art. 14) | 2020 to 2029 |
| 2. Implementation | Carrying out the plan | Continuous | 2020 to 2029 |
| 3. Monitoring | Written monitoring records | At least every six months (Art. 13) | 2020 to 2029 |
| 4. Evaluation | Results against targets, obstacles, fixes | Every year (note e) | 2020 to 2029 |
| 5. Reporting | Implementation report in the Annex IV format | Every year (note e) | 2020 to 2029 |
Source: BPK legal database: P.75/2019, Annex I part A and notes a and e; Arts. 13 and 14 (SPI summary), checked 22 Nov 2026.
The year cells of part A are a grid of marks. SPI has not yet confirmed, cell by cell, which years the grid marks for each stage; frequencies here come from the articles and the notes.
The notes under the tables do more work than the grid. Note a states the target: a 30% reduction in each business sector by 2029, measured against the goods, packaging and containers produced or used in 2029. Note d lets producers set targets for each sector individually or jointly through their association. Note e makes evaluation and reporting yearly. So the “target” column in part A carries no yearly numbers, and the regulation leaves the yearly path to each producer’s plan.
SPI analysis
A producer that files its plan in 2026 is not late against a fixed date, because no article sets a filing deadline. But the plan has only three full reporting years left, 2026, 2027 and 2028, before the 2029 measurement year, so a late filer must reach the same 30% with less time to show progress.
Annex I part B: the manufacturing table, line by line
The manufacturing table (part B.1) is the longest. It has eight rows, one per material, and four action columns: R1 limiting, R2 recycling, R3 reuse, and a remarks column with dates. Exhibit 5 sets it out in full, paraphrased from the Indonesian.
| Material | R1 limiting | R2 recycling, besides the common items | R3 reuse | Date |
|---|---|---|---|---|
| PE (HDPE, LDPE) | Embossed instead of plastic or printed labels; minimum bottle sizes | None besides the common items | Reusable HDPE packs, such as refilled shampoo or soap bottles | No end date |
| PET | Embossed labels; drink bottles of at least 1 litre | Clear, uncoloured plastic for mineral water | Reusable PET packs | No end date |
| PVC | Ban on the product, packaging or container, such as ceramic and dishware cleaner packs | None besides the common items | Reusable packs | Ban from 1 January 2030 |
| PP | Ban on flexible sachets under 50 ml or 50 g, and on plastic straws on drink packs | Monolayer sachets | Reusable packs | Bans from 1 January 2030 |
| PS | Ban on the product, packaging or container | None besides the common items | Reusable packs | Ban from 1 January 2030 |
| Aluminium cans | Embossed labels; minimum can sizes | None besides the common items | Reusable tins, such as biscuit or sweet tins | No end date |
| Paper | Minimum pack sizes | None besides the common items | Reusable boxes, such as cardboard boxes | No end date |
| Glass | Embossed labels; drink bottles of at least 220 ml | None besides the common items | Reusable jars, such as jam jars | No end date |
Source: BPK legal database: P.75/2019, Annex I part B.1 (SPI summary), checked 22 Nov 2026.
Paraphrased from the Indonesian. R2 in every row lists: 100% recyclable material, 50% recycled content, closed-loop recycling into the same packaging and open-loop recycling into other products. Where a ban applies, R2 runs until the ban date. Minimum sizes are in Exhibit 7.
Three patterns stand out. First, every row carries the same recycling menu: 100% recyclable material, 50% recycled content, closed-loop and open-loop recycling. The ministry’s 2024 FAQ calls the 50% recycled content line a directive. Second, two rows change the polymer itself: PET for mineral water should be uncoloured, and PP sachets should be monolayer until the small ones end. Third, three rows hold bans, PVC, PS and the PP sachet and straw lines, and the text keeps R2 running until each ban takes effect.
Labels. Four rows, PE, PET, aluminium and glass, ask for embossed labels in place of plastic sleeves or printed labels. Article 10(3) adds a separate labelling duty: products a producer chooses as part of its reduction method should carry a label saying they are compostable, recyclable or reusable.
SPI analysis
For a food or personal care brand, the PP row is the one with the most SKUs at stake. Sachets under 50 ml or 50 g are the single-serve formats that sell in traditional markets, and the row offers two routes before 2030: move to monolayer PP that can be recycled, or move up in size. After 1 January 2030, only the second route remains for packs under the threshold.
Food service and retail tables
The two other sector tables are short (Exhibit 6). They focus on carrier bags, cutlery and straws, and they add one action that the manufacturing table does not have: selling without packaging.
| Sector and material | R1 limiting | R2 recycling | R3 reuse | Date |
|---|---|---|---|---|
| Food and beverage services: single-use plastic (PS, PP, PE) | Ban on plastic carrier bags and single-use cutlery, including spoons, forks and straws | Recyclable non-plastic bags; cutlery 100% recyclable or 50% recycled content | Recyclable non-plastic bags; reusable cutlery | Ban from 1 January 2030 |
| Food and beverage services: paper | Cutlery and tableware that break down easily, such as edible cutlery | Cutlery 100% recyclable or 50% recycled content | Reusable cutlery, such as glass plates and cups and steel spoons and forks | No end date |
| Retail: single-use plastic carrier bags (HDPE, LDPE) | Ban on single-use bags; sell products without hard-to-decompose packaging; sell in bulk | Recyclable non-plastic bags; 100% recyclable plastic bags; bags with 50% recycled content; products in recyclable packaging | Reusable bags, such as cloth bags or jute sacks | Ban from 1 January 2030 |
Source: BPK legal database: P.75/2019, Annex I parts B.2 and B.3 (SPI summary), checked 22 Nov 2026.
Paraphrased from the Indonesian. Where a ban applies, R2 runs until the ban date.
The retail row is the one with reach beyond the store’s own bags. Its R1 column asks retailers to sell products without hard-to-decompose packaging and to sell in bulk, and its R2 column asks them to sell products in recyclable packaging. SPI analysis: that turns a retailer’s roadmap into a lever on its suppliers, because the retailer can meet part of its plan only by changing the range it stocks.
The ministry’s 2024 FAQ adds that a retailer or food service business with its own brands must also apply R1, R2 and R3 to those brands. A supermarket chain with private label goods therefore has two sets of rows to plan against: the retail row for its bags and stores, and the manufacturing rows for its own-brand packs.
In practice: Ahold Delhaize in Indonesia.
SPI’s Buyers Database records Super Indo, 51% owned, as the group’s Indonesian banner, and reads P.75/2019 as covering Super Indo’s own-brand packs and carrier bags. On the regulation’s tables, that means the retail row for bags and stores and the manufacturing rows for private label, with the carrier bag end date of 1 January 2030 or any earlier local rule.
Minimum pack sizes: the overlooked R1 lines
The R1 column of the manufacturing table sets minimum sizes for five of the eight materials (Exhibit 7). They are written as limiting actions, not as stand-alone bans, and SPI’s rule note records that their legal character in the annex is less clear than the dated bans. They still tell a producer which formats the roadmap treats as waste-heavy.
| Material | Pack type | Minimum size |
|---|---|---|
| PE | Food | 200 g |
| PE | Beverages | 1 litre |
| PE | Consumer goods | 500 ml |
| PE | Liquid soap and shampoo | 500 ml |
| PET | Beverage bottles | 1 litre |
| Aluminium | Liquids | 330 ml |
| Aluminium | Solids | 200 g |
| Paper | Liquids | 250 ml |
| Paper | Powders | 200 g |
| Glass | Beverage bottles | 220 ml |
Source: BPK legal database: P.75/2019, Annex I part B.1, R1 column (SPI summary), checked 22 Nov 2026.
Sizes as listed. The annex sets them as limiting actions; it attaches no end date to them, unlike the 2030 bans. SPI does not read them as legal limits; check with counsel.
SPI analysis
The sizes cluster around one idea: fewer, larger packs. A 600 ml PET water bottle sits below the 1 litre line, and a 250 ml aluminium can below the 330 ml line. For a beverage brand the minimum sizes are best read as the direction the roadmap expects the range to move in, and any plan that keeps small formats should show what R2 or R3 action offsets them.
The 2030 list: eight lines across three tables
The 1 January 2030 end dates appear in two places: in the sector tables and in note b under them. Note b names four items: plastic straws, foam plastic food containers, single-use plastic carrier bags and plastic foam. The sector tables add PVC, PS, small PP sachets and single-use cutlery. Exhibit 8 consolidates the list.
| Format | Where it appears | Sector |
|---|---|---|
| Plastic straws | Note b; B.1 PP row; B.2 single-use plastic row | Manufacturing; food service |
| Single-use plastic carrier bags | Note b; B.2; B.3 | Food service; retail |
| Foam plastic food containers | Note b | All sectors |
| Plastic foam | Note b | All sectors |
| Single-use plastic cutlery, spoons and forks | B.2 single-use plastic row | Food service |
| PVC products, packaging and containers | B.1 PVC row | Manufacturing |
| PS products, packaging and containers | B.1 PS row | Manufacturing |
| Flexible PP sachets under 50 ml or 50 g | B.1 PP row | Manufacturing |
Source: BPK legal database: P.75/2019, Annex I parts B.1 to B.3 and notes b and c (SPI summary), checked 22 Nov 2026.
SPI consolidation. Note c: where a regional government sets an earlier ban, producers follow it and adjust their plan. SPI's Ledger of 25 October 2026 lists six formats; this table separates cutlery and plastic foam.
Note c makes the national date a ceiling, not a floor. If a regional government sets a ban that takes effect before 1 January 2030, producers must follow it and change their plan, and Article 10(4) writes the same rule into the plan itself. The ministry’s 2024 FAQ gives Jakarta’s rule on free plastic bags as an example of such a regional ban. The ministry’s Info 3R dashboard reported in December 2024 that, as of August 2024, 2 provinces, 45 cities and 67 regencies had single-use plastic policies.
In practice: Kraft Heinz in Indonesia.
SPI’s Buyers Database lists P.T. Heinz ABC Indonesia and reads P.75/2019 as reaching its sauce bottles and sachets, since food and beverage manufacturing is a named sector. It records that a Kraft Heinz roadmap filed under the regulation was not found. On the PP row, any sauce sachet under 50 ml or 50 g would fall under the 2030 end date; SPI has not yet confirmed the sizes of the sachets sold.
Who must file a plan: SPI's five-gate test
The regulation does not use a size threshold, and the ministry’s 2024 FAQ does not mention one or any exemption for small businesses. SPI reads the articles and the FAQ as five gates (Exhibit 9). This is a planning framework drawn from the texts, not a legal reading; check edge cases with counsel.
| Gate | Question | If yes | If no |
|---|---|---|---|
| 1. Sector | Are you in food, drinks, consumer goods or personal care manufacturing, food service, or retail? | Go to gate 2 | Not named in Art. 3 |
| 2. Material | Do your products or packs use plastic, aluminium cans, glass or paper that are hard to decompose, recycle or reuse? | Go to gate 3 | Outside Art. 4, though recyclable or reusable items still count toward the plan |
| 3. Role | Do you make, own the brand of, or distribute imported packaged goods? | Go to gate 4 | Retail and food service roles still file under their own row |
| 4. Filing entity | Are you in a commercial area, a franchise or a group? | Area manager or parent may coordinate (Art. 11); group units may file and be compiled | File your own plan with the Minister, copied to the governor and regent or mayor (Art. 12) |
| 5. Market | Are the goods sold in Indonesia? | Count them in the baseline | The FAQ says exporters count only the share sold in Indonesia |
Source: SPI analysis of P.75/2019, Arts. 1, 3, 4, 11 and 12, and the KLHK FAQ of January 2024 (SPI summary), checked 22 Nov 2026.
Framework for planning only, not a legal interpretation. The FAQ sets no size threshold and does not address micro and small businesses or e-commerce.
Gate 3, the brand owner. The FAQ is plain that brand owners must prepare the roadmap and report results. A subsidiary can file its own roadmap, saying it belongs to a group, so the parent can compile results. A business active in several sectors keeps one account under its main sector.
Gate 4, who files. Article 11 lets the manager of a commercial area coordinate the plans of its tenants, and a parent company coordinate franchisees that hold an SPPL, the environmental management and monitoring statement for activities that need no full environmental permit. Article 12 sends each plan to the Minister through the Director General, with copies to the governor and the regent or mayor, and attaches the company identity, the environmental permit or SPPL and the business permits.
Gate 5, the market. The FAQ counts products marketed in Indonesia, domestic or imported. An exporter counts only the share it sells at home.
The plan and the report: Annexes II and IV
Two annexes fix the documents. Annex II is the format for the plan; Annex IV is the format for the yearly report, whose content Article 16 lists. Annex III guides consumer communication. Exhibit 10 sets the plan and the report side by side.
| Part | Plan (Annex II) | Report (Annex IV and Art. 16) |
|---|---|---|
| Identity | Company identity and business profile | Company identity and business profile |
| Responsibility | Person in charge | Same, with the plan as filed |
| Baseline and targets | Baseline, methods, targets and timeline | Reduced raw materials and packaging; easily decomposed packs made; recyclable or reusable materials used |
| Take-back | Take-back scheme and partners | Take-back carried out; residue types and quantities |
| Communication | Consumer communication plan; trial runs | Consumer communication carried out; monitoring records |
| Evaluation | Not applicable | Results, obstacles and corrective actions |
| Attachments | Environmental permit or SPPL; business permits | Contracts with recyclers and their licences; handover logs, manifests and photos |
Source: BPK legal database: P.75/2019, Arts. 10, 12 and 16 and Annexes II and IV; KLHK FAQ, January 2024 (SPI summary), checked 22 Nov 2026.
Section headings paraphrased from the Indonesian. Annex III covers consumer communication content and channels.
The FAQ explains the mechanics. Producers file in an online producer performance application, after asking the Directorate of Waste Reduction for an account and an introductory session, and they can ask for mentoring. Some attachments need the signature of top management. Results are reported in the same application, with cooperation contracts, handover logs or manifests and photos as evidence.
The baseline. The FAQ’s method is SKU by SKU: annual units multiplied by the packaging weight of each material, with similar SKUs grouped. The year 2020 uses actual data and later years use projections; a producer that prepares its roadmap in 2021 to 2023 uses that year’s actual data. Growth rates may be the company’s own estimate or past trends. Primary packaging comes first, but secondary and tertiary packaging must be in the baseline. Returns and expired goods are included; rejected factory goods are not, since they are handled as non-hazardous industrial waste.
What counts. The FAQ gives a take-back formula: take-back equals what is collected minus residue, and the recycled amount equals take-back minus recycling residue. Its example is 40 tonnes collected, 1 tonne residue and 0.5 tonnes recycling residue, leaving 38.5 tonnes recycled. Waste-to-energy does not count toward the roadmap, because the material is lost. Handling residue counts as responsible conduct, not as reduction.
Scenarios: what the 30% means for a growing producer
Because the target is 30% of 2029 generation, the number of tonnes to cut depends on sales growth. Exhibit 11 runs three scenarios for an illustrative producer with 1,000 tonnes of packaging and product waste in 2020, the FAQ’s actual-data year.
| Scenario | Growth a year (%) | 2029 generation (t) | Target to reduce (t) | Waste after the cut (t) | Change from 2020 (%) |
|---|---|---|---|---|---|
| Low | 0.0 | 1,000.0 | 300.0 | 700.0 | -30.0 |
| Base | 3.0 | 1,304.8 | 391.4 | 913.3 | -8.7 |
| High | 6.0 | 1,689.5 | 506.8 | 1,182.6 | 18.3 |
Source: SPI calculation from P.75/2019, Art. 2(2), and the KLHK FAQ of January 2024, items 2.2.5 and the baseline method (SPI summary), checked 22 Nov 2026.
Illustrative producer, 1,000 tonnes in 2020. Growth compounds for nine years to 2029. Target equals 30% of projected 2029 generation; waste after the cut equals 70%. Tonnes only. Break-even growth, at which waste after the cut equals the 2020 level, is about 4.0% a year by SPI's calculation.
The assumptions are simple and stated. Growth applies evenly to every SKU; packaging weight per unit stays the same; and the producer’s actions reduce tonnage without changing sales. The 1,000 tonnes is a round number for scale, not a company figure, and the FAQ’s own example, a projected 1,000 tonnes in 2029 with a target of about 300 tonnes, matches the low case.
SPI analysis
The 2029 base rewards honest projections and penalises sandbagged ones. A producer that projects low growth sets a smaller target, but if it then grows faster, the 2029 measurement uses actual generation and the gap widens. R1 actions that lower packaging weight per unit, such as embossed labels and larger packs, also lower the 2029 generation the target is measured on, while R2 and R3 actions count collected, recycled or reused tonnes against it. SPI has not yet confirmed how the ministry’s application treats an R1 saving that appears in both the projection and the result.
In practice: Danone in Indonesia.
SPI’s Buyers Database records Indonesia as 5% of Danone’s 2025 sales, through AQUA water and SGM infant nutrition, and reads AQUA’s reusable jugs as a reuse route under P.75/2019. On the FAQ’s method, returnable jugs that are collected and refilled count as R3 reduction against the projected 2029 generation of the whole range, while any single-use PET bottle under 1 litre in the range would sit below the PET row’s R1 minimum size.
Uptake: what six years of roadmaps produced
The ministry has published two snapshots of uptake (Exhibit 12). Read together, they show slow growth in filings and a small tonnage against national waste.
| Measure | Value | Date or year | Source |
|---|---|---|---|
| Producers that drafted roadmaps | 52 | 7 October 2024 | Info 3R |
| Producers recognised by the Minister | 20 | 7 October 2024 | Info 3R |
| Producers given guidance | 842 | 6 October 2026 | KLH/BPLH |
| Producers registered | 386 | 6 October 2026 | KLH/BPLH |
| Producers that submitted a roadmap | 79 | 6 October 2026 | KLH/BPLH |
| Producers that carried out and reported commitments | 28 | 6 October 2026 | KLH/BPLH |
| Reported producer waste reduction | about 217,000 t | 2024 | KLH/BPLH |
| Reported producer waste reduction | about 242,000 t | 2025 | KLH/BPLH |
| National waste generation, a year | about 52,765,130 t | 2026 release | SPI calculation |
Source: KLH Info 3R dashboard article of 9 December 2024; KLH/BPLH releases of 6 October and 8 September 2026 (SPI summary), checked 22 Nov 2026.
Counts as each source reports them; the two snapshots may use different definitions. National waste per year is SPI's calculation from the 8 September 2026 daily figure, 144,562 tonnes a day times 365.
SPI calculation: submitted roadmaps rose from 52 drafted in October 2024 to 79 submitted in October 2026, 27 more in two years, and producers recognised or reporting rose from 20 to 28. The 2025 reported reduction of about 242,000 tonnes is about 0.46% of national generation of about 52.8 million tonnes a year, and 11.5% above 2024. Spread over the 28 reporting producers, it is about 8,643 tonnes each on average, which says more about the size of the reporters than about the sector.
The scale of the national problem frames those numbers. The ministry told the House of Representatives’ Commission XII in September 2026 that Indonesia generates 144,562 tonnes of waste a day, growing 1.48% a year, with about 25% managed and about 36.59% reaching the environment, and that its national waste roadmap aims to reach full management gradually by 2028 and to sustain it in 2029, under the 2025 to 2029 medium-term plan. In May 2025 it had put 2023 generation at 56.6 million tonnes, of which 18% was plastic, with 39.01% handled properly. The figures use different bases and are not added or compared here as a trend.
SPI analysis
The 30% in P.75/2019 is a producer target, not a national one, so 0.46% is not a measure of failure against it. It is a measure of reach. With 79 plans on file, the producer roadmap touches a small part of the market, which is the reason the ministry gives for replacing the regulation rather than amending it.
Industry reaction
“Peta jalan sebagaimana dimaksud pada ayat (1) dilaksanakan untuk mencapai target pengurangan sampah oleh Produsen sebesar 30% (tiga puluh persen) dibandingkan dengan jumlah timbulan Sampah di tahun 2029.”
Ministry of Environment and Forestry, regulator, P.75/2019, Article 2(2), 18 October 2019
“Target pengurangan sampah sebesar 30% pada akhir tahun 2029 dihitung berdasarkan proyeksi total timbulan sampah dari semua Stock Keeping Unit (SKU) produk, wadah, dan kemasan yang dihasilkan atau digunakan produsen pada tahun tersebut.”
KLHK Directorate of Waste Reduction, regulator guidance with GIZ 3RproMar, FAQ on P.75/2019, item 2.2.5, January 2024
“Sementara itu, penerapan sanksi administrasi direncanakan akan dilakukan paska 2029 pada fase kedua peraturan (10 tahun berikutnya) atau dapat dipercepat sebelum 2029 jika diperlukan.”
In English: SPI’s translation: “The roadmap referred to in paragraph (1) is carried out to achieve a target of waste reduction by Producers of 30% (thirty percent) compared with the amount of Waste generated in 2029.”
In English: SPI’s translation: “The waste reduction target of 30% at the end of 2029 is calculated on the projected total waste generation from all Stock Keeping Units (SKUs) of products, containers and packaging that the producer makes or uses in that year.”
In English: SPI’s translation: “Meanwhile, administrative sanctions are planned to be applied after 2029, in the second phase of the regulation (the next 10 years), or may be brought forward before 2029 if needed.”
At the public consultation, Deputy Minister of Environment and Deputy Head of BPLH Diaz Hendropriyono said that all companies should carry the same EPR obligation, and that the ministry now had time to take in each stakeholder’s views so as to create a level playing field for all producers (KLH/BPLH release, 6 October 2026; SPI’s paraphrase of the Indonesian).
The two FAQ lines matter as much as the article. The first fixes the arithmetic behind Exhibit 11; the second explains why the regulation has run for six years without a published sanction. The deputy minister’s remarks at the public consultation of 6 October 2026 explain the direction of the replacement: one duty for all companies, rather than a plan for those that volunteer.
Enforcement and the replacement draft
Enforcement under P.75/2019 rests on three levers. Article 18 has the Minister, governors and regents or mayors supervise producers, the regional heads at least once a year, and Article 19 lets the Minister step in where a regional head does not. Article 21 has them apply sanctions to producers that do not reduce waste, but under other laws. Articles 22 to 25 provide incentives and disincentives: awards for good performance, given by whichever level of government issued the producer’s environmental permit, and publication of poor performance in print and electronic media.
The FAQ adds the scale the ministry uses: Baik (good), Cukup (adequate) and Buruk (poor). SPI’s tracker record notes that SPI has not found a published sanction or a published poor-performance list under P.75/2019 as of 14 October 2026, and SPI has not yet confirmed the sanction articles of Law No. 18 of 2008 that Article 21 would rely on.
The replacement changes the model. On 12 July 2026 the Minister of Environment and Head of BPLH, Moh Jumhur Hidayat, said in a KLH/BPLH release that a ministerial regulation on EPR would have producers fund waste management through a PRO, and that about 10,000 large factories that use plastic would have to set aside a budget; the release gives no fee rate. On 8 September 2026 the ministry told Commission XII that the draft would set up a non-profit PRO formed by producers, with fees in proportion to packaging volume and type, and would bring importers into scope. On 6 October 2026 it held a public consultation, describing a timeline of enactment in November 2026, intensive socialisation until May 2027, registration, PROs and labels by the end of 2027, and full reduction duties from 2028, with annual planning to 2037. Public input was open on the EPR Knowledge Portal until 9 October 2026.
SPI analysis
The overlap matters for planning. If the draft keeps its timeline, 2028 is both the last full reporting year before P.75/2019’s 2029 measurement and the first year of the new regime. SPI has not yet confirmed whether the replacement will carry over the 2030 end dates, the minimum sizes or the 2029 measurement. Until the text is published, the safe planning assumption is that the Annex I format list stays relevant, because it matches the direction of every ministry statement in 2026. No IDR fee can be budgeted until rates are published.
How Indonesia compares in the region
SPI’s comparison of EPR legislation in 23 markets counts Indonesia among the five markets with no mandatory packaging EPR fee scheme yet. The contrast with its neighbours is about what the law counts. The Philippines’ Republic Act No. 11898 sets a yearly plastic recovery rate for large enterprises with fines, as SPI’s RA 11898 piece sets out; Vietnam sets per-material recycling rates with a payment route. Indonesia’s P.75/2019 sets one reduction target, measured on a future year, and leaves the yearly path to each producer.
The 2030 list is where Indonesia is most specific. SPI’s packaging deadlines calendar places the Annex I end dates on 1 January 2030, the same day as several EU PPWR dates, so a brand selling in both markets faces design changes for small formats in Asia and recyclability rules in Europe at once.
What leaders should do now
- Indonesian country leads, by 31 December 2026: list every SKU sold in Indonesia against the eleven Annex I rows, mark which fall in the eight 2030 lines, and record any earlier provincial or city ban for each sales region.
- Compliance teams, by 31 March 2027: file or update the P.75/2019 plan in the ministry’s producer application, with the baseline built SKU by SKU as the FAQ describes, and keep the filing receipt and the copies sent to governors and regents or mayors.
- Packaging engineers, by the 2027 design cycle: move PP sachets toward monolayer structures, plan the exit from sub-50 ml or sub-50 g formats, PVC and PS packs before 1 January 2030, and test embossed labels where the PE, PET, aluminium and glass rows ask for them.
- Finance and planning teams, before the 2027 budget closes: project 2029 generation from current growth plans, since the target moves with sales (Exhibit 11), and keep a separate open line for PRO fees under the replacement regulation.
- Retail and food service operators, by mid-2027: set a carrier bag and cutlery exit plan that meets the earliest local date, and apply the manufacturing rows to own-brand packs.
- Sustainability teams, every six months: keep signed monitoring records under Article 13, and collect recycler contracts, licences and handover logs for the yearly report.
- Legal and public affairs teams, through 2027: follow the publication of the replacement regulation and check with counsel which P.75/2019 duties it carries over and from when.
Questions for your board
- Which of our Indonesian entities are producers under Article 1 of P.75/2019, and has each filed a plan?
- How many of our Indonesian SKUs fall in the eight format lines that end on 1 January 2030, and what is our switch date for each?
- What 2029 generation have we projected, and does our growth plan make the 30% harder than the plan assumes?
- Which local bans apply earlier than 2030 in our main sales regions?
- Who holds the six-monthly monitoring records, and could we show them to a supervising governor or mayor tomorrow?
- Are we ready to register and join a PRO by the end of 2027 if the replacement regulation keeps its timeline?
What to watch
- Nov 2026: KLH/BPLH’s target month to enact the replacement producer regulation; SPI has not yet confirmed signature as of 7 November 2026.
- 31 Dec 2026: producers with roadmaps should hold their second six-monthly monitoring record for 2026 (Art. 13).
- May 2027: end of the ministry’s planned socialisation period for the new regulation.
- 2027, date not set: yearly reports on 2026 results in the Annex IV format.
- 31 Dec 2027: registration, PRO formation and packaging labels due under the draft timeline.
- 1 Jan 2028: full reduction duties under the draft, as described on 6 October 2026.
- 31 Dec 2029: end of the P.75/2019 roadmap period and the year the 30% is measured against.
- 1 Jan 2030: Annex I end dates for the eight format lines, unless a local ban came first.
- past
- next
- PP 81/2012 asks for a ten-year producer roadmappast
- Perpres 97/2017 makes producer duties a national strategypast
- P.75/2019 set in Jakartapast
- P.75/2019 promulgated and in forcepast
- Roadmap period beginspast
- Ministry FAQ handbook on P.75/2019past
- 52 roadmaps drafted, 20 producers recognisedpast
- Minister announces PRO funding rulepast
- Public consultation on the replacement draftpast
- Enactment targeted (month end shown)next
- Second six-monthly monitoring record for 2026next
- Socialisation period ends (month end shown)next
- Registration, PROs and labels under the draftnext
- Full duties under the draftnext
- Roadmap period ends; 30% measurednext
- Annex I end dates for eight format linesnext
- End of the draft's annual planning horizonnext
Source: JDIH Kemenkeu: PP 81/2012; peraturan.go.id: Perpres 97/2017 and Berita Negara 2019 No. 1545; KLHK FAQ; Info 3R; KLH/BPLH releases of July, September and October 2026 (SPI summary), checked 22 Nov 2026.
Past means before 7 November 2026. Dates given only as a month are shown on the first or last day of that month as marked in the text. Draft regulation dates are the ministry's targets, not law.
Show the data
| Date | Label | Category | Link |
|---|---|---|---|
| 2012-10-15 | PP 81/2012 asks for a ten-year producer roadmap | past | https://jdih.kemenkeu.go.id/api/download/fulltext/2012/81TAHUN2012PP.htm |
| 2017-10-23 | Perpres 97/2017 makes producer duties a national strategy | past | https://peraturan.go.id/files/ps97-2017.pdf |
| 2019-10-18 | P.75/2019 set in Jakarta | past | https://peraturan.go.id/files/bn1545-2019.pdf |
| 2019-12-05 | P.75/2019 promulgated and in force | past | https://peraturan.go.id/files/bn1545-2019.pdf |
| 2020-01-01 | Roadmap period begins | past | https://peraturan.bpk.go.id/Download/372928/P.75-2019%20PETA%20JALAN%20SAMPAH.pdf |
| 2024-01-01 | Ministry FAQ handbook on P.75/2019 | past | https://info3r.kemenlh.go.id/uploads/faq/1706772599_Handbook%20FAQ%20PermenLHK%20No.%2075%20Tahun%202019.pdf |
| 2024-10-07 | 52 roadmaps drafted, 20 producers recognised | past | https://info3r.kemenlh.go.id/berita/detail/RUg4OUpvY04xQk1rSFBzTXVhbEdsOUFoN0RrZ2ZpT1hualNwWjNzTW03cz0 |
| 2026-07-12 | Minister announces PRO funding rule | past | https://kemenlh.go.id/news/detail/klhbplh-wajibkan-produsen-biayai-pengelolaan-sampah-plastik-lewat-aturan-baru-buka-peluang-pekerjaan-hijau |
| 2026-10-06 | Public consultation on the replacement draft | past | https://kemenlh.go.id/news/detail/bukan-hanya-menjual-klhbplh-minta-produsen-bertanggung-jawab-atas-jejak-sampah-produknya |
| 2026-11-30 | Enactment targeted (month end shown) | next | https://kemenlh.go.id/news/detail/bukan-hanya-menjual-klhbplh-minta-produsen-bertanggung-jawab-atas-jejak-sampah-produknya |
| 2026-12-31 | Second six-monthly monitoring record for 2026 | next | https://peraturan.bpk.go.id/Download/372928/P.75-2019%20PETA%20JALAN%20SAMPAH.pdf |
| 2027-05-31 | Socialisation period ends (month end shown) | next | https://kemenlh.go.id/news/detail/bukan-hanya-menjual-klhbplh-minta-produsen-bertanggung-jawab-atas-jejak-sampah-produknya |
| 2027-12-31 | Registration, PROs and labels under the draft | next | https://kemenlh.go.id/news/detail/bukan-hanya-menjual-klhbplh-minta-produsen-bertanggung-jawab-atas-jejak-sampah-produknya |
| 2028-01-01 | Full duties under the draft | next | https://kemenlh.go.id/news/detail/bukan-hanya-menjual-klhbplh-minta-produsen-bertanggung-jawab-atas-jejak-sampah-produknya |
| 2029-12-31 | Roadmap period ends; 30% measured | next | https://peraturan.bpk.go.id/Download/372928/P.75-2019%20PETA%20JALAN%20SAMPAH.pdf |
| 2030-01-01 | Annex I end dates for eight format lines | next | https://peraturan.bpk.go.id/Download/372928/P.75-2019%20PETA%20JALAN%20SAMPAH.pdf |
| 2037-12-31 | End of the draft's annual planning horizon | next | https://kemenlh.go.id/news/detail/bukan-hanya-menjual-klhbplh-minta-produsen-bertanggung-jawab-atas-jejak-sampah-produknya |
Methodology
- Data used: the full text of P.75/2019 with Annexes I to IV from the BPK legal database; the Berita Negara 2019 No. 1545 copy on peraturan.go.id; the KLHK FAQ handbook of January 2024 on the Info 3R portal; KLH/BPLH releases of 12 July, 8 September and 6 October 2026; the ANTARA report of 8 September 2026; the Info 3R dashboard article of 9 December 2024; SPI tracker record PR-ID-001 and the Indonesia note (14 October 2026); SPI Buyers Database profiles for Danone, Ahold Delhaize and Kraft Heinz. Consulted 7 November 2026 unless stated.
- Counting rules: “material rows” are the numbered rows of Annex I parts B.1 to B.3; “format lines” consolidate the end dates in those tables and in note b, counting cutlery and plastic foam separately. Annex text is paraphrased; quoted lines are copied from the source and translated by SPI.
- Calculations: the scenarios compound growth for nine years from an illustrative 2020 base of 1,000 tonnes; national generation per year multiplies the ministry’s daily figure by 365. Tonnes only; no currency figures are used, summed or compared.
- Frameworks: the five-gate test is SPI’s planning tool, not a legal interpretation.
- Cut-off: 7 November 2026.
- Limitations: SPI has not yet confirmed the year-by-year marks of the Annex I part A grid, the legal effect of the minimum pack sizes, the sanction articles of Law No. 18 of 2008, the text, signature or fee rates of the replacement regulation, or whether it will keep the 2030 end dates. This is not legal advice; check with counsel and KLH/BPLH.
FAQ
What is Permen LHK P.75 tahun 2019?
It is Regulation of the Minister of Environment and Forestry No. P.75/MENLHK/SETJEN/KUM.1/10/2019 on the Roadmap for Waste Reduction by Producers, set on 18 October 2019 and in force since 5 December 2019. It requires producers in three sectors to plan and report a 30% waste cut against 2029 generation, and lists formats that end on 1 January 2030.
Who must submit a waste reduction roadmap under P.75/2019?
Producers in food, drink, consumer goods and personal care manufacturing, food and beverage services such as restaurants, cafes, caterers and hotels, and retail from shopping centres to traditional markets. Distributors of imported packaged goods and brand owners are included. The regulation and the ministry’s 2024 FAQ set no size threshold.
How is the 30% target in P.75/2019 calculated?
The target is 30% of the waste a producer generates in 2029, projected from every SKU of products, containers and packaging it makes or uses. The ministry’s FAQ builds the baseline from units times pack weight per material. A producer projecting 1,000 tonnes in 2029 must reduce about 300 tonnes through limiting, recycling or reuse.
What plastics are banned in Indonesia from 2030 under P.75?
Annex I ends, from 1 January 2030, plastic straws, single-use plastic carrier bags and cutlery, foam plastic food containers and plastic foam, PVC and PS products and packaging, and flexible PP sachets under 50 ml or 50 g. A regional ban that takes effect earlier must be followed and written into the producer’s plan.
Is there a penalty for not submitting a P.75 roadmap?
P.75/2019 sets no fine of its own. Article 21 applies sanctions under other laws, and Article 22 allows publication of poor performance. The ministry’s 2024 FAQ says administrative sanctions are planned mainly after 2029, in a second ten-year phase, or earlier if needed. SPI has not found a published sanction.
Is P.75/2019 being replaced?
Yes, in draft. KLH/BPLH consulted on a replacement on 6 October 2026, targeting enactment in November 2026, registration, PROs and labels by the end of 2027 and full duties from 2028. As of 7 November 2026, SPI has not yet confirmed signature. Until then, P.75/2019 remains in force.
Does P.75/2019 set minimum packaging sizes?
Its Annex I manufacturing table lists minimum sizes as limiting actions: 1 litre for PET and PE drink bottles, 220 ml for glass drink bottles, 330 ml for aluminium cans of liquids and 200 g for PE food packs, among others. They carry no end date, unlike the 2030 bans, and their legal effect needs checking with counsel.
Sources
- BPK legal database, Permen LHK No. P.75/MENLHK/SETJEN/KUM.1/10/2019 on the Roadmap for Waste Reduction by Producers, full text with Annexes I to IV, consulted 2026-11-07.
- peraturan.go.id, Berita Negara Republik Indonesia 2019 No. 1545, consulted 2026-11-07.
- BPK legal database, Permen LHK No. 75 Tahun 2019, record details, consulted 2026-10-25.
- KLHK Directorate of Waste Reduction with GIZ 3RproMar, FAQ tentang Peta Jalan Pengurangan Sampah oleh Produsen (January 2024), consulted 2026-11-07.
- KLH/BPLH, Bukan Hanya Menjual, KLH/BPLH Minta Produsen Bertanggung Jawab atas Jejak Sampah Produknya (6 October 2026), consulted 2026-11-07.
- KLH/BPLH, Kejar Target Pengelolaan Sampah, KLH/BPLH Siapkan Peta Jalan dan Perbarui Aturan Tanggung Jawab Produsen (8 September 2026), consulted 2026-11-07.
- KLH/BPLH, KLH/BPLH Wajibkan Produsen Biayai Pengelolaan Sampah Plastik Lewat Aturan Baru (12 July 2026), consulted 2026-11-07.
- KLH Info 3R, Dashboard Pengurangan Sampah, producer roadmap recognition (9 December 2024), consulted 2026-11-07.
- KLH/BPLH, press release SR.88/HUMAS/KLH-BPLH/5/2025 (22 May 2025), consulted 2026-10-14.
- Ministry of Finance JDIH, Government Regulation No. 81 of 2012 on Household Waste Management, consulted 2026-10-14.
- peraturan.go.id, Presidential Regulation No. 97 of 2017 on national policy and strategy for household waste, consulted 2026-10-14.
- ANTARA (press), Environment ministry prepares waste roadmap, updates producer rules (8 September 2026), consulted 2026-11-07.
- SPI Regulation Tracker, PR-ID-001 and the Indonesia jurisdiction note, data as of 2026-10-14, consulted 2026-11-07.
- SPI Packaging Buyers Database, Danone, Ahold Delhaize and Kraft Heinz profiles, consulted 2026-11-07.
- SPI Ledger, Southeast Asia’s packaging rules: Vietnam, Indonesia and the Philippines, consulted 2026-11-07.
Go deeper
- SPI Regulation TrackerPR-ID-001
- SPI LedgerPackaging deadlines from 2026 to 2030 cluster in 2026 and on 1 January 2030Between 2026 and 2030, 21 of the 79 rules in the SPI Regulation Tracker take effect, and adding the staged steps inside rules gives 70 dated…
- SPISPI Methodology: How SPI Sources, Checks, Labels and Corrects Packaging DataHow SPI sources 79 packaging rules, 179 brand targets and 216 fee rates, assigns statuses, re-checks sources weekly and corrects errors.