# LUCID Verpackungsregister after the VerpackDG: who registers and how foreign sellers name a representative

> The LUCID Verpackungsregister is Germany's packaging producer register, run by the Zentrale Stelle Verpackungsregister (ZSVR); since 12 August 2026, section 6 of the VerpackDG requires every producer under the EU PPWR to register there before first making packaging available in Germany, and section 5 requires a producer with no German branch that sells directly to German end users to appoint one authorised representative, in writing and in German, named in LUCID.

Publisher: Strategic Packaging Insights  
Published: 2026-11-09  
Last updated: 2026-11-09  
Page: https://www.strategicpackaginginsights.com/insights/lucid-verpackungsregister-verpackdg-authorised-representative/

**The LUCID Verpackungsregister is Germany's packaging producer register, run by the Zentrale Stelle Verpackungsregister (ZSVR); since 12 August 2026, section 6 of the VerpackDG requires every producer under the EU PPWR to register there before first making packaging available in Germany, and section 5 requires a producer with no German branch that sells directly to German end users to appoint one authorised representative, in writing and in German, named in LUCID.**

Registration is free, is done online in what SPI groups as five steps, and produces a number in the format DE plus 13 digits; what changed in August is who counts as a producer, which now follows the PPWR's five routes, and the compulsory representative, which was voluntary before. This SPI Ledger piece walks through the register step by step, sorts sellers into five register positions, and shows how many registrations and representatives three typical routes to market need.

## Executive summary

LUCID is the online register of the Stiftung Zentrale Stelle Verpackungsregister, the foundation that kept Germany's producer register under the old Verpackungsgesetz. The Verpackungsrecht-Durchführungsgesetz (VerpackDG), which replaced that Act on 12 August 2026, kept the register and made the ZSVR the register authority under Article 44(1) of Regulation (EU) 2025/40, the PPWR (section 6(6)). SPI's [German packaging law piece](https://www.strategicpackaginginsights.com/insights/germany-packaging-law-2026-verpackg-plastic-tax/) covers the law as a whole, and SPI's [news report of 2 November](https://www.strategicpackaginginsights.com/news/germany-lucid-registration-deadline-november-12/) covers the 12 November 2026 date for changes and the fines. This piece is about the register itself: who has to be in it, what the screens ask for, and how a seller without a German base appoints a representative.

Three things changed in August. First, the producer test now comes from the PPWR: Article 3(1)(15) names five routes, points (a) to (e), and the ZSVR now separates the manufacturer, which answers for conformity, from the producer, which registers and finances recycling where the packaging becomes waste. Second, a producer under PPWR Article 45(3) with no establishment in Germany has to appoint an authorised representative for extended producer responsibility before its first sale, which the ZSVR says was voluntary before. Third, the bar on handling packaging of unregistered producers now reaches fulfilment service providers through PPWR and Digital Services Act references (section 13(4)).

The register is free and continuous. Exhibit 1 shows the five steps of a new registration. Old entries count as registered under section 68(2), so a company already in LUCID does not register again; the ZSVR asks it to check brand names, packaging types and the representative.

The representative route is where most foreign sellers stop. The law allows one representative per producer, appointed by written power of attorney in German (section 5(4)). The ZSVR adds that the provider needs a German office or branch, cannot be affiliated with the seller, needs its own LUCID login, and becomes effective only once it confirms the appointment in LUCID (Exhibit 6). Registration itself stays with the producer.

By SPI's count, a non-EU group selling into Germany through three channels needs three LUCID registrations and two representatives today; the same brand selling only through a German importer needs none of its own (Exhibit 9). The EU Omnibus talks could change that count for EU-based sellers but, in both co-legislators' texts, not for sellers outside the EU (Exhibit 11).

## Key findings

1. Section 6(1) of the VerpackDG requires producers under PPWR Article 3(1)(15)(a) to (d) to register with the ZSVR before first making packaging available in Germany, and those under point (e) before unpacking; section 6(2) lists 7 items a registration contains (gesetze-im-internet.de, consulted 9 November 2026).
2. Section 5(2) requires a producer under PPWR Article 45(3) with no establishment in Germany to appoint an authorised representative before first making packaging available, and section 5(4) allows only 1 per producer, by written power of attorney in German.
3. The ZSVR's help pages give the process: a 24-hour activation link, 7 days to submit, and a registration number of DE plus 13 digits, 15 characters in all by SPI's count.
4. Section 9(2) lets producers below 10 tonnes of system-liable packaging in the previous year report once, by 1 June of the following year; **SPI calculation:**  10 tonnes is 200,000 packs at 50 grams or 1,000,000 packs at 10 grams (Exhibit 8).
5. **SPI analysis:**  five register positions cover most sellers, from a German brand owner that registers alone to a non-EU web shop that needs a registration and a representative (Exhibit 4).
6. **SPI calculation:**  an illustrative non-EU group with a direct web shop, an EU hub and a German importer needs 3 registrations and 2 representatives; under the Council's 1-tonne text the hub's representative could become optional, while the web shop's would not (Exhibits 9 and 11).
7. As of 9 November 2026, 3 days remain to the 12 November date in section 68(2), and LUCID is due to be offline from 09:00 to about 18:00 on 10 November for maintenance, the ZSVR says.

## The LUCID Verpackungsregister: what it is and who runs it

The law speaks of the ZSVR's electronic system on its website (section 6(3)); LUCID is the name the ZSVR gives it. The Stiftung Zentrale Stelle Verpackungsregister runs it as a public register of producers: section 6(4) has the ZSVR publish each registered producer's name and address, the representative where one is required, its brand names, its packaging types, its declarations, its registration number and its registration date. The ZSVR's help page says the public register is updated once a day, so an entry made today may not appear until tomorrow.

The legal basis moved on 12 August 2026. Old registrations under section 9 of the Verpackungsgesetz, in the version in force until 11 August 2026, count as registrations under section 6 of the new law, according to the first sentence of section 68(2). The register, the login and the number stay the same. SPI tracks the law as [PR-DE-001](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/germany/pr-de-001/) and the PPWR as [PR-EU-001](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/european-union/pr-eu-001/).

The register has three functions in the law. It identifies who carries extended producer responsibility for each pack in Germany. It links to the dual systems: section 7(1) has a producer give its system the material, mass and its registration number, and section 9 has it report the same data to the ZSVR. And it acts as a gate: section 13 bars producers from making packaging available while not properly registered, bars distributors from supplying it, and bars fulfilment service providers from handling it. The ZSVR provides an automated data comparison for those checks.

The scale is large. Each German resident accounted for 215.19 kg of packaging waste in 2023, against an EU average of 177.8 kg, and the ZSVR allocated 2025 market shares among ten dual systems, according to SPI's Germany tracker data. The register is how each kilo of that is tied to a producer.

**Search note for Dutch and English readers.**  Searchers in the Netherlands type "verpakkingsact duitsland" and English searchers "german packaging act"; both mean the same thing today. The Act they knew, the Verpackungsgesetz, no longer applies, and the register duties sit in the VerpackDG and the PPWR. The LUCID login and the register are unchanged.

## Who has to register in LUCID since 12 August 2026

The VerpackDG has no producer definition of its own. Section 6(1) refers to the PPWR, and the Commission's guidance, Notice C/2026/3084 of 10 June 2026, explains the five points of Article 3(1)(15). Exhibit 2 sets each against its LUCID consequence.

The Commission's guidance reads distance selling broadly. Offering a product online directly to an end user counts as making it available in the end user's Member State, and its worked example, a company that fills fruit and sells it through a web shop to an end user in another Member State, concludes that the company is the producer there with extended producer responsibility duties. Logistics firms that unpack or repack imported goods are not end users, which is the case point (e) captures.

The ZSVR's page on the 12 August changes adds three rules of thumb. A company whose own name or brand is on the packaging is both manufacturer and producer. For unbranded packaging, there is exactly one manufacturer per packaging unit in the EU, and the producer is the first company in the supply chain of the Member State where the packaging becomes waste. A foreign company counts as producer only where it ships directly from abroad to a private or commercial end user.

SPI analysis

The last rule is the dividing line for exporters. A foreign brand that sells to a German importer or retailer is usually not in LUCID at all; its German buyer is the producer. The same brand selling to German consumers through its own web shop is the producer for those parcels. SPI's [EPR producer definition piece](https://www.strategicpackaginginsights.com/insights/epr-producer-definition-eu-uk-us-india/) compares this test with the UK, US and Indian ones.

**Service packaging.**  Bakeries, butchers and takeaways that fill service packaging at the point of sale have a separate route under section 7(2): they can ask the pre-distributor that supplied the empty packaging to take over system participation, in which case duties under sections 6, 9 and 10 pass to it. The original producer still registers under section 6, and the ZSVR's guide has a LUCID option for companies that buy only pre-licensed service packaging, with the supplier's name entered as the brand.

## What changed on 12 August 2026

Exhibit 3 sets the register as it ran up to 11 August 2026 against the register since 12 August, using only points the law and the ZSVR state.

Two of the changes reach companies that were outside LUCID before. The point (e) route brings in operators that unpack goods in Germany, and the PPWR's distance-selling reading brings in sellers established elsewhere in the EU that ship directly to German end users. For both groups the third sentence of section 68(2) set 12 September 2026 as the registration date, 31 days after the start of the new law, by SPI's calculation.

The representative change reaches companies that were already in LUCID. A registered foreign producer without a representative is prompted for one when it logs in, the ZSVR says, and the change counts as an update to its entry. SPI's news report on the [12 November date](https://www.strategicpackaginginsights.com/news/germany-lucid-registration-deadline-november-12/) covers what section 68(2) and section 66 say about that date; this piece does not repeat it.

SPI analysis

The August change shifts the register's question from "who first placed this pack in Germany" to "which PPWR route makes you the producer here". For most German brand owners the answer is the same company. For cross-border sellers, groups with several legal entities and logistics firms, it can be a different one, and LUCID holds one entry per legally independent entity, as the ZSVR's help page says.

## A framework: five register positions

SPI sorts sellers into five positions, each defined by the law and the ZSVR's guidance and each with a different LUCID footprint (Exhibit 4).

The positions read best from the duty to register. All five positions except the brand in position 2 need their own LUCID entry. Only positions 3 and 4 need a representative, because only they lack a German establishment while supplying German end users directly. In positions 3 and 4 the representative, not the seller, signs the system contract and files the data reports, as the next sections show.

**Position 3 in practice.**  A Dutch web shop with no German branch that ships parcels to German consumers is the producer in Germany under PPWR Article 3(1)(15)(d). Since 12 August 2026 it registers in LUCID itself and names one representative in Germany. Its sales in the Netherlands remain under the Dutch scheme; the German entry covers only the packaging that becomes waste in Germany. The pending EU Omnibus texts could make the representative optional for some sellers in this position (Exhibit 11).

**Position 5 in practice.**  A German logistics provider that removes outer packaging from imported goods before passing them on is not an end user, the Commission's guidance says, so point (e) can make it the producer for the packaging it removes. Section 6(1) then requires registration before unpacking, and section 7(1) system participation before unpacking where the packaging is system-liable.

## LUCID Verpackungsregister step by step

Exhibit 1 gave the five steps of a new registration. Exhibit 5 sets out what each screen asks for, and where the ZSVR's help pages describe common errors.

**Login and activation.**  The ZSVR's English help page says the activation link is valid for 24 hours and can be used once, and that an unfinished registration is deleted automatically after seven days. The register expects one registration per company. Affiliated companies, branches and stores that are legally independent each register, and the ZSVR's duplicate notice can be ignored in that case.

**Tax and identification numbers.**  The ZSVR's German guide asks for the VAT identification number or tax number and a national identification number. Its help page gives fallbacks: "Other" with "No tax number yet" while a number is pending, and "Other" with "None" for freelancers without an identification number. Section 6(2) no. 4 asks for the same identification data for the representative.

**Brand names.**  Section 6(2) no. 5 asks for the names under which the producer first makes packaging available in Germany. The ZSVR's guide says to enter the names visible on the packaging, the company name where there is none, and, for pre-licensed service packaging, the supplier's name. These names appear in the public register, which is where a retailer or platform looks.

**Submission and number.**  A few minutes after submission the ZSVR sends an administrative act by email with the LUCID registration number, the help page says, and the registration takes effect on receipt of that act. The number has the format DE followed by 13 digits. It is the German EPR number for packaging only: the ZSVR notes that other registers, such as the EAR register for electrical equipment and the UBA's DIVID for the single-use plastics fund, need separate registration.

**Changes and ending an entry.**  Changes are made online in LUCID, with no separate message to the ZSVR, and appear in the public register the next day. A registration can be terminated in LUCID only where no producer obligations under the PPWR remain; termination cannot be reversed. Section 6(1) requires changes, including to the representative, to be reported without delay.

## How a seller without a German base appoints an authorised representative

Section 5 has six paragraphs, and together with the ZSVR's guidance they describe the appointment in order (Exhibit 6).

**The timing.**  Section 5(2) asks for the appointment before the first making available of packaging or packaged products in Germany. For a new seller the law therefore places the appointment before the first parcel to a German end user. For a seller already registered before 12 August, the ZSVR's login prompt and the general duty to report changes in section 6(1) apply.

**The provider.**  The ZSVR's guidance says it publishes no list of representatives and that sellers check providers themselves; it also says fees apply, which are agreed privately between seller and provider. SPI shows no fee figures, because none is public. A seller that cannot find its provider in LUCID is told to ask the provider whether it is registered as a representative and has the login ID.

**The end of a mandate.**  Section 5(6) has the producer inform the ZSVR without delay when an appointment ends. The designation ends when the ZSVR confirms it, and the representative stays responsible for duties that arose while it was designated. Because only one representative is allowed, a seller changing provider moves from one to the next rather than holding both.

Exhibit 7 shows the split of duties once the appointment is confirmed.

Section 5(1) draws a related line for third parties in general. Any obligated party can commission others to carry out its duties, but not registration under section 6 or data reports under section 9. A German producer can therefore use a service provider to manage its system contracts, but it registers and reports itself; a foreign producer's representative is a different legal figure, which section 5(3) treats as the producer and which acts in its own name.

## Industry reaction

The voices on the register are the law and the register authority itself; SPI has not yet confirmed a trade association statement on the representative duty since 12 August.

> "Jeder Hersteller darf nur einen Bevollmächtigten für die erweiterte Herstellerverantwortung beauftragen."
>
>
>
> SPI's translation: Each producer may appoint only one authorised representative for extended producer responsibility.

***VerpackDG** , section 5(4), [gesetze-im-internet.de](https://www.gesetze-im-internet.de/verpackdg/__5.html), BGBl. 2026 I Nr. 207*

The one-representative rule is why Exhibit 9 counts one representative per legal entity, not per channel.

> "Authorisation will only take effect once the authorised representative has confirmed it with the LUCID Packaging Register."

***Zentrale Stelle Verpackungsregister** , register authority, [Authorised representative](https://www.verpackungsregister.org/en/ppwr/authorised-representative), guidance page, consulted 9 November 2026*

The confirmation step means a seller's own entry is not enough: the representative acts in LUCID before the appointment shows.

> "There is one exception: registration with the LUCID Packaging Register remains the manufacturer’s personal responsibility."

***Zentrale Stelle Verpackungsregister** , register authority, [I want to know what will change from 12 August](https://www.verpackungsregister.org/en/i-want-to-know-what-will-change-from-12-august), guidance page, consulted 9 November 2026*

The page uses "manufacturer" where the law uses Hersteller; in the VerpackDG that word covers the PPWR producer.

> "Für die Registrierung fallen keine Kosten an."
>
>
>
> SPI's translation: No costs arise for registration.

***Zentrale Stelle Verpackungsregister** , register authority, [So registrieren Sie sich im Verpackungsregister LUCID](https://www.verpackungsregister.org/information-orientierung/themenpakete/registrierung), 12 August 2026*

Registration is free; the costs a producer carries sit in the system contract and, for a foreign seller, in the representative's fee.

## After registration: the data reports

Registration is the first of three register touchpoints. The second is the volume report. Section 9(1) requires producers of system-liable packaging to report to the ZSVR, without delay after giving the data to their system, their registration number, the material and mass of the packaging, the system's name and the period. Section 9(2) exempts producers below 10 tonnes of system-liable packaging in the previous calendar year from the running reports and lets them report once, by 1 June of the following year. Exhibit 8 puts the threshold into packs.

SPI analysis

For a cross-border web shop the 10-tonne line is the practical divide between one report a year and running reports. A seller shipping 1,667 parcels a month with 500 grams of carton, filler and sales packs each reaches 10 tonnes in a year; a seller of light cosmetics in 50 gram packs reaches it at 16,667 units a month. For packaging made available in 2026, section 68(5) keeps the old law's material breakdown, so a small producer's first report under the new law, due by 1 June 2027, still uses the 2026 categories.

The third touchpoint, the declaration of completeness above 80 tonnes of glass, 50 tonnes of paper and board or 30 tonnes of other materials, is covered in SPI's [German packaging law piece](https://www.strategicpackaginginsights.com/insights/germany-packaging-law-2026-verpackg-plastic-tax/). Where a representative is appointed, it files the reports and the declaration, as Exhibit 7 shows.

## Scenarios: how many registrations and representatives a group needs

Because LUCID holds one entry per legally independent producer and section 5(4) allows one representative per producer, the register footprint of a group depends on how it sells into Germany. Exhibit 9 counts it for three set-ups of one illustrative brand.

The low case shows why many foreign brands never appear in LUCID: the producer is the first company in the German supply chain. The base case is the minimum for any seller shipping directly to German end users from outside Germany. The high case adds an EU hub and a German subsidiary. The German subsidiary has an establishment, so it registers without a representative; the Dutch subsidiary and the non-EU web shop each need their own entry and their own representative.

SPI analysis

The count matters more than any fee, because each entry carries its own brand list, packaging types, system contract and reports, and each representative its own mandate. A group that routes German consumer sales through one entity carries one set; a group that lets each regional site ship direct carries several. The figures in Exhibit 9 are counts, not costs, and SPI shows no representative fees because none is published.

## In practice: three groups in the SPI Buyers Database

The SPI Buyers Database records German exposure for three groups named in this topic. Exhibit 10 shows what it records; SPI has not yet confirmed the content of any company's LUCID entry.

In practice: Henkel.

The Buyers Database records Henkel's head office in Düsseldorf and names Weisser Riese and Gliss among its brands, with household laundry and hair care packaging registered in LUCID and financed through system participation under [PR-DE-001](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/germany/pr-de-001/). A German brand owner with its name on the pack is manufacturer and producer under the ZSVR's rule, so its LUCID entry carries the brand list; no representative is involved because it is established in Germany.

In practice: Nestlé.

The database records Nestlé Deutschland AG as the German entity, with coffee, confectionery and pet food packs registered in LUCID under [PR-DE-001](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/germany/pr-de-001/) and any beverage containers or bag and foil packaging in scope also under the single-use plastics fund. LUCID's one-entry-per-legal-entity rule means that a pack first made available in Germany by another group company would sit in that company's entry, not Nestlé Deutschland AG's.

In practice: Pfizer.

The database lists Pfizer Deutschland GmbH and records that [PR-DE-001](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/germany/pr-de-001/) brings the sales packaging around medicines into LUCID and system participation. For a pharmaceutical group the register question is per pack and per entity, like any other producer's; the SPI profile records no packaging-specific German figures.

## The EU Omnibus and the German representative duty

Section 5 rests on PPWR Article 45(3), and that paragraph is being renegotiated. The Commission's Omnibus VIII proposal of 10 December 2025, tracked as [PR-EU-012](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/european-union/pr-eu-012/), would suspend Article 45(3) for EU-based producers until 1 January 2035. SPI's [Omnibus piece](https://www.strategicpackaginginsights.com/insights/omnibus-ppwr-authorised-representative-non-eu-exporters/) follows the Parliament position of 20 October 2026 and the Council mandate of 21 October 2026; Exhibit 11 shows only what each text would mean for a seller shipping into Germany.

Two points follow for the register. First, no version touches registration: a Dutch web shop shipping to German consumers would stay a producer under point (d) and stay in LUCID, with or without a representative. Second, SPI's [PR-EU-012](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/european-union/pr-eu-012/) note records that an adopted suspension would apply directly, so the German duty in section 5 could not be applied to the sellers it covers. Argus Media reported on 26 October 2026, as SPI's Omnibus piece records, that negotiations were expected to start later in November.

## Where the register sits in the German calendar

By SPI's calculation, from 9 November 2026 there are 3 days to 12 November, 52 days to 31 December 2026, 95 days to 12 February 2027 and 204 days to 1 June 2027. The 10 November maintenance window falls two days before the change date.

## What leaders should do now

These are business planning points drawn from what the rules say. They are not legal advice, and each producer's position depends on its own facts.

1. **Compliance leads, before 12 November 2026:**  the ZSVR's help page asks existing registrants to check whether their brand names, packaging types or authorised representative need updating because of the PPWR, which makes those three fields, read against Exhibit 4, the review its guidance describes.
2. **E-commerce leads at sellers without a German branch, before the next parcel to a German end user:**  section 5(2) ties the representative to the first making available, so the mandate, the provider's LUCID login and the confirmation in Exhibit 6 sit on the critical path of any new German launch.
3. **Group legal and tax teams, in the 2027 planning round:**  Exhibit 9 shows that each legal entity selling direct adds a LUCID entry and a representative, which makes the choice of selling entity a register question as well as a tax one.
4. **Finance teams, before 1 June 2027:**  producers near 10 tonnes can check which side of the section 9(2) line their 2026 volumes fall, since it decides between one report a year and running reports (Exhibit 8).
5. **Marketplace and fulfilment managers, ongoing:**  section 13(4) and the ZSVR's automated comparison make the public register the reference for seller checks, and the register updates once a day.
6. **Public affairs teams at EU-based cross-border sellers, through the trilogue:**  Exhibit 11 shows the representative duty could change for them and not for non-EU sellers, so existing mandates stay relevant until a text is adopted.

## Questions for your board

- Which of our legal entities is the producer in Germany for each pack, under which PPWR point, and does each have its own LUCID entry?
- Do any of our entities ship directly to German end users without a German establishment, and is each one's representative confirmed in LUCID?
- Do our brand names and packaging types in LUCID match what we sell in Germany today?
- How many LUCID entries and representatives does our route to market create, and would a different selling entity reduce them?
- Which of our entities sit near the 10-tonne line in section 9(2)?
- What happens to our German set-up under each Omnibus outcome?

## What to watch

- **10 Nov 2026:**  LUCID offline from 09:00 to about 18:00 for maintenance, the ZSVR says.
- **12 Nov 2026:**  the section 68(2) date for changes to entries carried over from the Verpackungsgesetz.
- **Later in November 2026:**  expected start of Omnibus negotiations between Parliament and Council on PPWR Article 45(3), as reported.
- **31 Dec 2026:**  old-law system participations end at the latest under section 68(1).
- **12 Feb 2027:**  the fines in section 66(2) apply under section 68(17).
- **1 Jun 2027:**  annual report for 2026 from producers under 10 tonnes, under section 9(2).
- **No date confirmed by SPI:**  the amending law the Bundesrat asked for on 10 July 2026.

## Methodology

- **Data used:**  VerpackDG sections 5, 6, 7, 9, 13 and 68 on gesetze-im-internet.de; four ZSVR pages (Authorised representative; I want to know what will change from 12 August; Registering in LUCID; So registrieren Sie sich im Verpackungsregister LUCID, 12 August 2026); Commission Notice C/2026/3084; SPI rule notes [PR-DE-001](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/germany/pr-de-001/), [PR-EU-001](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/european-union/pr-eu-001/) and [PR-EU-012](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/european-union/pr-eu-012/) and the Germany jurisdiction note (14 October 2026); SPI Buyers Database profiles for Henkel, Nestlé and Pfizer; SPI Ledger 68 for the Omnibus texts. Consulted 9 November 2026 unless stated.
- **Legal text:**  the sections are taken from gesetze-im-internet.de, the federal justice ministry's portal; the binding version is BGBl. 2026 I Nr. 207. German quotes carry SPI's translations.
- **Counting rules:**  one LUCID entry per legally independent producer and one representative per producer, as the ZSVR and section 5(4) state. Pack counts in Exhibit 8 divide 10,000,000 grams by the pack weight. Day counts run from 9 November 2026.
- **Assumptions:**  pack weights in Exhibit 8 and the brand and channels in Exhibit 9 are SPI assumptions, not company data. The five positions in Exhibit 4 are SPI's segmentation.
- **Cut-off:**  9 November 2026.
- **Limitations:**  SPI has not yet confirmed the old Act's wording on several points in Exhibit 3, any trilogue outcome on Article 45(3), or the content of any company's LUCID entry. SPI shows no representative or system fees, because none is published. This is analysis of what the rules say, not legal advice.

## Sources

1. [gesetze-im-internet.de, VerpackDG § 5 Beauftragung Dritter und Bevollmächtigung](https://www.gesetze-im-internet.de/verpackdg/__5.html), BGBl. 2026 I Nr. 207, consulted 2026-11-09.
2. [gesetze-im-internet.de, VerpackDG § 6 Registrierung; zuständige Behörde](https://www.gesetze-im-internet.de/verpackdg/__6.html), consulted 2026-11-09.
3. [gesetze-im-internet.de, VerpackDG § 7 Systembeteiligungspflicht](https://www.gesetze-im-internet.de/verpackdg/__7.html), consulted 2026-11-09.
4. [gesetze-im-internet.de, VerpackDG § 9 Datenmeldungen](https://www.gesetze-im-internet.de/verpackdg/__9.html), consulted 2026-11-09.
5. [gesetze-im-internet.de, VerpackDG § 13 Verbot bestimmter Tätigkeiten in Bezug auf Verpackungen](https://www.gesetze-im-internet.de/verpackdg/__13.html), consulted 2026-11-09.
6. [gesetze-im-internet.de, VerpackDG § 68 Übergangsvorschriften](https://www.gesetze-im-internet.de/verpackdg/__68.html), consulted 2026-11-09.
7. [Zentrale Stelle Verpackungsregister, Authorised representative](https://www.verpackungsregister.org/en/ppwr/authorised-representative), consulted 2026-11-09.
8. [Zentrale Stelle Verpackungsregister, I want to know what will change from 12 August](https://www.verpackungsregister.org/en/i-want-to-know-what-will-change-from-12-august), consulted 2026-11-09.
9. [Zentrale Stelle Verpackungsregister, Registering in LUCID](https://www.verpackungsregister.org/en/help/registering-in-lucid), consulted 2026-11-09.
10. [Zentrale Stelle Verpackungsregister, So registrieren Sie sich im Verpackungsregister LUCID, 12 August 2026](https://www.verpackungsregister.org/information-orientierung/themenpakete/registrierung), consulted 2026-11-09.
11. [European Commission, Notice C/2026/3084 on the application of Regulation (EU) 2025/40](https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52026XC03084), consulted 2026-11-09.
12. [SPI Regulation Tracker, PR-DE-001, VerpackDG](https://www.strategicpackaginginsights.com/data/packaging-regulation-tracker/germany/pr-de-001/), data as of 2026-10-14.
13. SPI Regulation Tracker, PR-EU-001, PPWR, data as of 2026-10-14.
14. SPI Regulation Tracker, PR-EU-012, Omnibus VIII authorised representative, data as of 2026-10-14.
15. SPI Regulation Tracker, Germany jurisdiction note, data as of 2026-10-14.
16. SPI Packaging Buyers Database, Henkel, Nestlé and Pfizer profiles, data as of 2026-10-14.
17. [SPI Ledger, German packaging law in 2026: VerpackG, VerpackDG and the planned plastic tax](https://www.strategicpackaginginsights.com/insights/germany-packaging-law-2026-verpackg-plastic-tax/), updated 2026-11-01.
18. [SPI News, LUCID registration changes are due by 12 November 2026](https://www.strategicpackaginginsights.com/news/germany-lucid-registration-deadline-november-12/), 2026-11-02.
19. [SPI Ledger, Omnibus VIII and the PPWR authorised representative rule](https://www.strategicpackaginginsights.com/insights/omnibus-ppwr-authorised-representative-non-eu-exporters/), 2026-10-30.
20. [SPI Ledger, EPR producer definition: EU, UK, US states and India](https://www.strategicpackaginginsights.com/insights/epr-producer-definition-eu-uk-us-india/), data as of 2026-10-14.
21. [SPI Ledger, EPR online marketplace obligations](https://www.strategicpackaginginsights.com/insights/epr-online-marketplace-obligations-amazon-walmart-alibaba/), data as of 2026-10-14.

